Molex 0010897063 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Molex 0010897063 is a vertical rectangular connector header designed for through-hole mounting applications. This 6-position, 2-row connector with 0.100" (2.54mm) pitch serves board-to-board and cable interconnection requirements across automotive, medical, telecommunications, and general-purpose applications. The part is currently active in production with 880 units in stock. Equivalent and substitute parts are identified to support design flexibility, supply chain continuity, and application-specific requirements where mechanical or electrical variations are acceptable within defined parameters.

Key Parameters

Parameter	Value
Manufacturer Part Number	0010897063
Manufacturer	Molex
Category	Rectangular Connectors
Connector Type	Header, Breakaway
Contact Type	Male Pin
Number of Positions	6
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Push-Pull
Contact Finish - Mating	Gold
Contact Material	Copper Alloy
Insulation Material	Liquid Crystal Polymer (LCP), Glass Filled
Material Flammability Rating	UL94 V-0
Insulation Color	Black
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Product Status	Active

Substitute Part Grouping Explanation

Substitute parts for the Molex 0010897063 are qualified based on the following critical parameters that must align with the original specification:

Core Compatibility Parameters:

Number of Positions: 6
Number of Rows: 2
Pitch - Mating: 0.100" (2.54mm)
Row Spacing - Mating: 0.100" (2.54mm)
Mounting Type: Through Hole
Termination: Solder
Contact Type: Male Pin
Fastening Type: Push-Pull
Insulation Color: Black
Material Flammability Rating: UL94 V-0

Acceptable Variations: Substitute parts may differ in contact length specifications, contact finish composition, insulation material formulation, operating temperature range, current rating, and RoHS compliance status, provided the core mechanical and electrical interface parameters remain constant. Contact finish thickness and post material variations are acceptable where mating surface finish remains gold or equivalent.

Parameter Comparison

Parameter	Molex 0010897063	3M 2306-6221-TG	Amphenol ICC 77313-124-06LF	Amphenol ICC 77313-127-06LF	Amphenol ICC 77313-424-06LF	Amphenol ICC 77313-824-06LF	Mill-Max 818-22-006-10-005101	TE Connectivity 87227-3	3M 929665-01-03-I	3M 929665-02-03-I	3M 929665-03-03-EU
Manufacturer	Molex	3M	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Mill-Max Manufacturing Corp.	TE Connectivity AMP Connectors	3M	3M	3M
Connector Type	Header, Breakaway	Header	Header, Breakaway	Header, Breakaway	Header, Breakaway	Header, Breakaway	Piston	Header	Header	Header	Header
Number of Positions	6	6	6	6	6	6	6	6	6	6	6
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Through Hole	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull	N/A	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	N/A	Male Pin	Male Pin	Male Pin	Male Pin
Contact Finish - Mating	Gold	Gold	Gold or Gold, GXT™	Gold or Gold, GXT™	Tin	Gold or Gold, GXT™	Gold	Gold	Gold	Gold	Gold
Contact Material	Copper Alloy	Copper Alloy	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Phosphor Bronze	Copper Alloy	Copper Alloy	Copper Alloy
Insulation Material	Liquid Crystal Polymer (LCP), Glass Filled	Thermoplastic, Glass Filled	Thermoplastic	Thermoplastic	Thermoplastic	Thermoplastic	N/A	Thermoplastic	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT)
Insulation Color	Black	Black	Black	Black	Black	Black	N/A	Black	Black	Black	Black
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	N/A	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Operating Temperature	Not specified	-55°C ~ 105°C	-65°C ~ 130°C	-65°C ~ 130°C	-65°C ~ 130°C	-65°C ~ 130°C	Not specified	-65°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C
Current Rating (Amps)	Not specified	3A	3A per Contact	3A per Contact	3A per Contact	3A per Contact	Not specified	3A	2.5A	2.5A	2.5A
RoHS Status	ROHS3 Compliant	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	Not applicable	RoHS Compliant	RoHS Compliant	RoHS Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	Not Applicable	1 (Unlimited)
Product Status	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

Primary Substitutes (Highest Compatibility):

The Amphenol ICC BERGSTIK® series (77313-124-06LF, 77313-127-06LF, 77313-424-06LF, 77313-824-06LF) and TE Connectivity 87227-3 are direct functional equivalents. All maintain the core 6-position, 2-row, 0.100" pitch configuration with through-hole solder termination and push-pull fastening. These parts are RoHS compliant and rated for extended operating temperatures (-65°C to 130°C for Amphenol ICC variants). Inventory availability ranges from 1,017 to 3,660 units.

Secondary Substitutes (Acceptable with Design Verification):

The 3M 2306-6221-TG and 3M 929 series (929665-01-03-I, 929665-02-03-I, 929665-03-03-EU) maintain mechanical compatibility but differ in contact length specifications and operating temperature ranges. The 3M 2306-6221-TG is not RoHS compliant, requiring compliance assessment for regulated applications. The 3M 929 series operates at -40°C to 105°C with 2.5A current rating per contact, suitable for general-purpose and telecommunications applications.

Specialized Substitute (Alternative Contact Technology):

The Mill-Max 818-22-006-10-005101 employs spring piston contact technology rather than traditional male pin headers. This part maintains the 6-position, 2-row, 0.100" pitch interface and is ROHS3 compliant. Spring piston design provides alternative mating characteristics and may be selected for applications requiring different contact engagement profiles.

Compliance Considerations:

For applications requiring RoHS3 compliance, select from Molex 0010897063, Mill-Max 818-22-006-10-005101, or Amphenol ICC BERGSTIK® variants. For applications with RoHS non-compliance acceptance, the 3M 2306-6221-TG is available. All substitute parts maintain UL94 V-0 flammability rating and MSL 1 moisture sensitivity classification.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol ICC 77313-127-06LF directly replace the Molex 0010897063 in existing designs?

A: Yes. Both parts share identical mating pitch (0.100"), position count (6), row configuration (2), mounting type (through-hole), and termination method (solder). The 77313-127-06LF operates across a wider temperature range (-65°C to 130°C versus unspecified for the Molex part) and is RoHS compliant. Contact length specifications differ slightly (0.260" versus 0.320" mating contact length), which may affect board-to-board spacing in constrained layouts.

Q: What is the difference between the Amphenol ICC 77313-424-06LF and 77313-824-06LF?

A: Both parts are mechanically and electrically identical with one exception: the 77313-424-06LF has tin mating contact finish, while the 77313-824-06LF has gold or gold GXT™ mating contact finish. The 77313-824-06LF provides superior corrosion resistance and is recommended for applications requiring extended shelf life or harsh environmental exposure.

Q: Is the Mill-Max 818-22-006-10-005101 compatible with standard 0.100" pitch header receptacles?

A: The Mill-Max 818-22-006-10-005101 is a spring piston connector, not a traditional male pin header. It is designed to mate with standard 0.100" pitch female receptacles but employs spring-loaded contact technology. Mechanical compatibility exists, but contact engagement characteristics differ from traditional pin headers. Consult application requirements before substitution.

Q: Why do the 3M 929 series parts have lower current ratings (2.5A) compared to other substitutes (3A)?

A: The 3M 929 series uses copper alloy contacts with different cross-sectional geometry optimized for board-to-board applications. Current rating reflects the contact design and material properties. For applications requiring 3A per contact, select Amphenol ICC BERGSTIK® variants or TE Connectivity 87227-3.

Q: Are all substitute parts available in the same packaging format?

A: No. The Molex 0010897063 is supplied in bulk packaging. The Mill-Max 818-22-006-10-005101 is supplied in tube packaging. All other substitutes are supplied in bulk packaging. Packaging format may affect procurement lead times and handling procedures.

Q: Which substitute part is recommended for automotive applications?

A: The Molex 0010897063 is explicitly rated for automotive applications. Among substitutes, the Amphenol ICC BERGSTIK® series (77313-124-06LF, 77313-127-06LF, 77313-424-06LF, 77313-824-06LF) and TE Connectivity 87227-3 are suitable for automotive environments based on operating temperature range (-65°C to 130°C), UL94 V-0 flammability rating, and RoHS compliance. Verify specific automotive qualification requirements with the connector manufacturer.

Q: Can the 3M 2306-6221-TG be used in new designs requiring RoHS compliance?

A: No. The 3M 2306-6221-TG is RoHS non-compliant. It is suitable only for legacy designs or applications where RoHS compliance is not required. For new designs, select from RoHS-compliant alternatives: Amphenol ICC BERGSTIK® series, TE Connectivity 87227-3, 3M 929 series, or Mill-Max 818-22-006-10-005101.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message