Molex 0010894066 Equivalent & Substitute Parts

Part Overview

The Molex 0010894066 is a rectangular connector header designed for through-hole, right-angle board-to-board or cable applications. This 6-position, 2-row connector operates at 0.100" (2.54mm) pitch and features male pins with gold-plated mating contacts and tin-plated posts. The component is actively manufactured and widely used in automotive, medical, telecommunications, and general-purpose applications. Equivalent parts are identified when design requirements necessitate alternative sourcing, inventory availability, or specific performance characteristics within the same connector category.

Substiute Parts

0010894066

MolexIn Stock: 9420010894066 Datasheet

Current PartRFQ

79257-206HLF

Amphenol ICC (FCI)In Stock: 86379257-206HLF Datasheet

MFR RecommendedRFQ

826634-3

TE Connectivity AMP ConnectorsIn Stock: 7096826634-3 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Equivalent parts for the Molex 0010894066 are qualified based on the following critical parameters that must align for direct substitution:

Core Matching Criteria:

• Pitch - Mating: 0.100" (2.54mm)
• Number of Positions: 6
• Number of Rows: 2
• Row Spacing - Mating: 0.100" (2.54mm)
• Connector Type: Header
• Contact Type: Male Pin
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Fastening Type: Push-Pull
• Material Flammability Rating: UL94 V-0

The substitute parts listed below meet these core electrical and mechanical parameters, ensuring mechanical and electrical compatibility in applications where the Molex 0010894066 is specified. Variations in contact length, insulation height, contact material composition, and finish thickness are within acceptable tolerances for this connector category and do not affect board-level compatibility.

Parameter Comparison

Engineering Selection Recommendations

All three connectors—Molex 0010894066, Amphenol ICC 79257-206HLF, and TE Connectivity 826634-3—are actively manufactured and comply with RoHS regulations. Each maintains UL94 V-0 flammability certification and MSL 1 moisture sensitivity rating, ensuring compatibility with standard PCB assembly and storage protocols.

The Molex 0010894066 and TE Connectivity 826634-3 both feature breakaway connector design, providing additional mechanical flexibility for applications requiring individual pin separation. The Amphenol ICC 79257-206HLF offers the BERGSTIK® II series designation with specified operating temperature range of -65°C to 130°C and 3A current rating.

The TE Connectivity 826634-3 provides the highest inventory availability (7037 pieces) and specifies 5A current rating with operating temperature range of -65°C to 105°C. Contact material differs across the three options: Copper Alloy (Molex), Phosphor Bronze (Amphenol ICC), and Brass (TE Connectivity), with corresponding variations in contact finish thickness specifications.

Selection should be based on application-specific requirements for current capacity, operating temperature range, and inventory lead time considerations.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol ICC 79257-206HLF be used as a direct replacement for the Molex 0010894066?

A: Yes. Both connectors share identical pitch (0.100"), position count (6), row configuration (2 rows), mounting type (through-hole right-angle), and termination method (solder). The 0.010" difference in contact length mating (0.230" vs. 0.240") and 0.030" difference in insulation height fall within acceptable mechanical tolerances for board-level compatibility.

Q: What are the key differences between the TE Connectivity 826634-3 and the Molex 0010894066?

A: Both connectors are mechanically and electrically compatible. The TE Connectivity part specifies higher current rating (5A vs. unspecified), lower operating temperature maximum (105°C vs. unspecified), and uses Brass contact material versus Copper Alloy. Insulation color differs (Green vs. Black). Contact finish thickness on posts is significantly higher (118.1µin vs. 74.8µin).

Q: Are there packaging differences between these substitute parts?

A: Yes. The Molex 0010894066 is supplied in Tube packaging, the Amphenol ICC 79257-206HLF in Bag packaging, and the TE Connectivity 826634-3 in Bulk packaging. Packaging format does not affect connector performance or compatibility.

Q: Do all three connectors meet RoHS compliance requirements?

A: Yes. The Molex 0010894066 is ROHS3 Compliant. Both the Amphenol ICC 79257-206HLF and TE Connectivity 826634-3 are RoHS Compliant. All three maintain UL94 V-0 flammability certification and MSL 1 moisture sensitivity rating.

Q: Which substitute part has the best availability?

A: The TE Connectivity 826634-3 offers the highest inventory level at 7037 pieces in stock, compared to 918 pieces for the Molex 0010894066 and 848 pieces for the Amphenol ICC 79257-206HLF.

Q: Can these connectors be used in automotive applications?

A: The Molex 0010894066 explicitly lists automotive applications. The Amphenol ICC 79257-206HLF and TE Connectivity 826634-3 do not specify application categories in the provided data. Confirmation of automotive suitability for these alternatives should be obtained from manufacturer documentation.