Molex 0010892646 Equivalent & Substitute Parts

Part Overview

The Molex 0010892646 is a rectangular connector header featuring a right-angle, through-hole configuration with 64 positions at 2.54mm pitch. This component is classified as obsolete, making equivalent substitute parts necessary for ongoing design support and procurement. The part serves board-to-board connectivity applications across automotive, medical, telecommunications, and general-purpose industries. Identifying compatible alternatives ensures design continuity and supply chain reliability.

Substiute Parts

0010892646

MolexIn Stock: 7140010892646 Datasheet

Current PartRFQ

802-10-064-20-001000

Mill-Max Manufacturing Corp.In Stock: 1108802-10-064-20-001000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0010892646 is determined by strict alignment of the following critical parameters:

• Connector Configuration: 64-position, 2-row header with 0.100" (2.54mm) mating pitch and 0.100" row spacing
• Mounting & Orientation: Through-hole, right-angle mounting
• Contact System: Male pin contacts with solder termination and push-pull fastening
• Electrical Interface: Unshrouded, board-to-board connectivity
• Compliance: ROHS3 compliance and MSL 1 rating

The Mill-Max Manufacturing Corp. part number 802-10-064-20-001000 meets these substitution criteria. Both parts share identical position count, pitch, row configuration, mounting type, and termination method. Variations in contact material (phosphor bronze vs. brass alloy), contact finish composition, and insulation material (polyester glass-filled vs. PCT) remain within acceptable substitution parameters for this connector category.

Parameter Comparison

Engineering Selection Recommendations

The Mill-Max 802-10-064-20-001000 is a direct functional substitute for the obsolete Molex 0010892646. Both parts maintain ROHS3 compliance and MSL 1 ratings, ensuring regulatory and environmental compatibility. The Mill-Max part carries active product status, providing assured long-term availability and supply chain stability compared to the obsolete Molex component.

Design integration requires verification of mechanical fit within existing PCB layouts, as contact shape differs (square vs. circular). The substitution maintains electrical interface compatibility through identical pitch, position count, and contact configuration. Both parts support identical fastening and termination methods.

Frequently Asked Questions (FAQ)

Q: Can the Mill-Max 802-10-064-20-001000 directly replace the Molex 0010892646 in existing designs?

A: Yes, the Mill-Max part is functionally equivalent for board-to-board connectivity applications. Both parts share identical mating pitch (2.54mm), position count (64), row configuration (2 rows), mounting type (through-hole right-angle), and termination method (solder). Mechanical fit verification is required due to contact shape differences.

Q: What are the key differences between these two parts?

A: Primary differences include contact material (phosphor bronze vs. brass alloy), contact shape (square vs. circular), post finish (tin vs. gold), and insulation material (polyester glass-filled vs. PCT). These variations remain within acceptable substitution parameters for this connector category.

Q: Why is the Molex part obsolete?

A: The Molex 0010892646 is classified as obsolete by the manufacturer. The Mill-Max 802-10-064-20-001000 is an active product with ongoing manufacturing support and availability.

Q: Are both parts RoHS compliant?

A: Yes, both the Molex 0010892646 and Mill-Max 802-10-064-20-001000 are ROHS3 compliant with MSL 1 (Unlimited) ratings.

Q: What packaging is available for the substitute part?

A: The Mill-Max 802-10-064-20-001000 is supplied in tube packaging.