Molex 0010892261 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Molex 0010892261 is a through-hole rectangular connector header with 26 positions arranged in 2 rows at 0.100" (2.54mm) pitch. This component is classified as obsolete, though 682 units remain in stock. The C-Grid 8624 series connector features unshrouded, breakaway male pin headers with solder termination and push-pull fastening, designed for board-to-board or cable applications across automotive, general purpose, lighting, medical, and telecommunications sectors.

Due to obsolete product status, equivalent and substitute parts from active manufacturers provide continuity for new designs and ongoing production requirements. Substitutes must maintain electrical and mechanical compatibility within the specified parameter tolerances.

Key Parameters

Parameter	Value
Connector Type	Header, Breakaway
Contact Type	Male Pin
Number of Positions	26
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Push-Pull
Contact Finish - Mating	Gold
Material Flammability Rating	UL94 V-0
Insulation Color	Black
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict adherence to the following core parameters:

Connector Type: Header configuration (standard or cuttable variants acceptable)
Contact Type: Male Pin
Number of Positions: 26
Number of Rows: 2
Pitch - Mating: 0.100" (2.54mm)
Row Spacing - Mating: 0.100" (2.54mm)
Mounting Type: Through Hole
Termination: Solder or Kinked Pin with Solder
Fastening Type: Push-Pull
Contact Finish - Mating: Gold
Material Flammability Rating: UL94 V-0
Insulation Color: Black
Moisture Sensitivity Level: 1 (Unlimited)

Substitute parts are grouped by manufacturer and product series. Variations in contact length, insulation height, contact material composition, and operating temperature ranges are permitted within the constraints of mechanical fit and electrical performance. All listed substitutes maintain compatibility with the original part's mating interface and PCB footprint requirements.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Series	Product Status	Connector Type	Positions	Rows	Pitch (mm)	Row Spacing (mm)	Mounting	Termination	Contact Finish - Mating	Flammability	RoHS Status
0010892261	Molex	C-Grid 8624	Obsolete	Header, Breakaway	26	2	2.54	2.54	Through Hole	Solder	Gold	UL94 V-0	ROHS3 Compliant
450-10-226-00-001101	Preci-Dip	450	Active	Header	26	2	2.54	2.54	Through Hole	Solder	Gold	UL94 V-0	ROHS3 Compliant
69192-226	Amphenol ICC (FCI)	BERGSTIK® II	Active	Header	26	2	2.54	2.54	Through Hole	Kinked Pin, Solder	Gold or Gold, GXT™	UL94 V-0	RoHS non-compliant
69192-526	Amphenol ICC (FCI)	BERGSTIK® II	Active	Header	26	2	2.54	2.54	Through Hole	Kinked Pin, Solder	Gold or Gold, GXT™	UL94 V-0	RoHS non-compliant
69192-626	Amphenol ICC (FCI)	BERGSTIK® II	Active	Header	26	2	2.54	2.54	Through Hole	Kinked Pin, Solder	Gold or Gold, GXT™	UL94 V-0	RoHS non-compliant
961226-6404-AR	3M	961	Active	Header	26	2	2.54	2.54	Through Hole	Solder	Gold	UL94 V-0	RoHS Compliant
M20-9761342	Harwin Inc.	M20	Active	Header, Cuttable	26	2	2.54	2.54	Through Hole	Solder	Gold	UL94 V-0	ROHS3 Compliant
MTLW-113-07-F-D-280	Samtec Inc.	Flex Stack, MTLW	Active	Header	26	2	2.54	2.54	Through Hole	Solder	Gold	UL94 V-0	ROHS3 Compliant
MTLW-113-09-L-D-280	Samtec Inc.	Flex Stack, MTLW	Active	Header	26	2	2.54	2.54	Through Hole	Solder	Gold	UL94 V-0	ROHS3 Compliant
TSW-113-07-F-D-LL	Samtec Inc.	TSW	Active	Header	26	2	2.54	2.54	Through Hole	Kinked Pin, Solder	Gold	UL94 V-0	ROHS3 Compliant
TSW-113-08-F-D	Samtec Inc.	TSW	Active	Header	26	2	2.54	2.54	Through Hole	Solder	Gold	UL94 V-0	ROHS3 Compliant

Engineering Selection Recommendations

Primary Recommendation: Preci-Dip 450-10-226-00-001101

The Preci-Dip 450-10-226-00-001101 is the most direct equivalent. It maintains active product status, ROHS3 compliance, and identical core specifications including 26-position, 2-row configuration at 2.54mm pitch with through-hole solder termination and gold-plated mating contacts. Operating temperature range (-55°C to 125°C) and current rating (3A) provide adequate performance margins for general applications.

Secondary Recommendations: Samtec TSW Series (TSW-113-07-F-D-LL, TSW-113-08-F-D)

Samtec TSW series headers offer active status and ROHS3 compliance with extended operating temperature range (-55°C to 125°C). The TSW-113-07-F-D-LL features kinked pin termination with lower post length (0.100"), while TSW-113-08-F-D provides standard solder termination with extended post length (0.200"). Both maintain gold mating contact finish and UL94 V-0 flammability rating.

Alternative: Harwin M20-9761342

The Harwin M20-9761342 cuttable header variant offers ROHS3 compliance and active status with 3A per contact current rating. The cuttable feature provides design flexibility for applications requiring custom row configurations. Operating temperature range (-40°C to 105°C) is suitable for standard industrial and consumer applications.

Note on Amphenol ICC BERGSTIK® II Series (69192-226, 69192-526, 69192-626)

These parts maintain mechanical and electrical compatibility but carry RoHS non-compliant status. Selection is appropriate only for applications without RoHS regulatory requirements or where legacy component qualification is mandated.

Note on 3M 961226-6404-AR

The 3M 961 series header is RoHS compliant with active status. Operating temperature range (-25°C to 105°C) is narrower than alternatives, limiting use in extended temperature applications.

Frequently Asked Questions (FAQ)

Q: Can I substitute the obsolete Molex 0010892261 with any of the listed parts?

A: All listed parts maintain the critical parameters required for direct substitution: 26 positions, 2 rows, 2.54mm pitch, through-hole mounting, solder termination, and gold mating contact finish. However, verify your application's RoHS compliance requirements. If RoHS3 compliance is mandatory, exclude Amphenol ICC BERGSTIK® II variants (69192-226, 69192-526, 69192-626).

Q: What is the difference between kinked pin and standard solder termination?

A: Kinked pin termination (used in Amphenol ICC BERGSTIK® II and Samtec TSW-113-07-F-D-LL) features a bent contact post that provides mechanical retention during PCB assembly. Standard solder termination (used in Preci-Dip, 3M, Harwin, and most Samtec variants) relies on solder flow for mechanical and electrical connection. Both methods are functionally equivalent for through-hole applications.

Q: Are there differences in contact length that affect PCB design?

A: Yes. Contact length variations exist across substitutes. The original Molex part specifies 0.240" (6.10mm) mating contact length and 0.107" (2.71mm) post length. Preci-Dip 450-10-226-00-001101 provides 0.156" (3.96mm) mating and 0.164" (4.17mm) post length. Samtec MTLW variants offer 0.280" (7.11mm) mating contact length. These differences do not affect PCB footprint compatibility but may influence mating force and connector durability in high-cycle applications. Verify contact length specifications against your mating connector design.

Q: Which substitute offers the best current-carrying capacity?

A: Samtec MTLW series (MTLW-113-07-F-D-280, MTLW-113-09-L-D-280) provides 5.2A per contact, the highest among all listed substitutes. Harwin M20-9761342 and Preci-Dip 450-10-226-00-001101 both provide 3A per contact. The original Molex part does not specify current rating. Select based on your application's power distribution requirements.

Q: What is the operating temperature range for each substitute?

A: Samtec TSW and MTLW series, Preci-Dip 450, and Harwin M20 all support -55°C to 125°C. The 3M 961 series is limited to -25°C to 105°C. The original Molex part does not specify operating temperature. For applications requiring extended low-temperature operation, avoid the 3M variant.

Q: Are all substitutes available in the same packaging?

A: Packaging varies. Preci-Dip, Amphenol ICC, 3M, Harwin, and most Samtec variants are supplied in bulk. Samtec MTLW-113-09-L-D-280 packaging is not specified. Samtec TSW-113-08-F-D is supplied in bag format. Verify packaging requirements with your procurement process.

Q: Can I use the Harwin M20-9761342 cuttable header as a direct replacement?

A: Yes. The cuttable feature does not affect compatibility with standard mating connectors. The part maintains all critical electrical and mechanical parameters. The cuttable design provides additional flexibility for custom applications but does not compromise performance in standard configurations.

Q: Which substitute has the best long-term availability?

A: All listed substitutes carry active product status, indicating ongoing manufacturing and distribution. Samtec, Harwin, and Preci-Dip are established connector manufacturers with broad product portfolios and stable supply chains. For critical applications, confirm long-term availability commitments with your component supplier.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message