Molex 0010883141 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Molex 0010883141 is an active-status rectangular connector header designed for through-hole, right-angle mounting applications. This 14-position, 2-row connector with 0.100" (2.54mm) pitch serves board-to-board and cable interconnection requirements across automotive, medical, telecommunications, and general-purpose applications. Substitute parts are identified to address inventory availability, packaging preferences, or specific performance requirements while maintaining core electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Connector Type	Header, Breakaway
Contact Type	Male Pin
Number of Positions	14
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Fastening Type	Push-Pull
Shrouding	Unshrouded
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0010883141 is determined by strict alignment with the following core parameters:

Connector configuration: 14-position, 2-row header with 0.100" (2.54mm) mating pitch and row spacing
Mounting and termination: Through-hole, right-angle orientation with solder termination
Contact system: Male pin, push-pull fastening, unshrouded design
Compliance baseline: UL94 V-0 flammability rating and RoHS compliance

The identified substitute parts (TE Connectivity AMP Connectors 826634-7 and 3M 929667-02-07-I) satisfy these core requirements. Variations in contact length, contact finish composition, insulation material, and operating temperature ranges represent acceptable engineering tolerances within the rectangular connector header category and do not preclude functional substitution in standard applications.

Parameter Comparison

Parameter	Molex 0010883141	TE Connectivity 826634-7	3M 929667-02-07-I
Manufacturer	Molex	TE Connectivity AMP Connectors	3M
Series	C-Grid 70216	AMPMODU Mod II	929
Connector Type	Header, Breakaway	Header, Breakaway	Header
Contact Type	Male Pin	Male Pin	Male Pin
Number of Positions	14	14	14
Number of Rows	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull
Shrouding	Unshrouded	Unshrouded	Unshrouded
Contact Length - Mating	0.240" (6.10mm)	0.264" (6.70mm)	0.235" (5.97mm)
Contact Length - Post	0.110" (2.79mm)	0.126" (3.20mm)	0.405" (10.29mm)
Insulation Height	0.220" (5.60mm)	0.219" (5.56mm)	0.215" (5.45mm)
Contact Shape	Square	Square	Square
Contact Finish - Mating	Tin	Gold	Gold
Contact Material	Copper Alloy	Brass	Copper Alloy
Insulation Material	Polyester, Glass Filled	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT), Polyester, Glass Filled
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0
Insulation Color	Black	Green	Black
Operating Temperature	Not specified	-65°C ~ 105°C	-40°C ~ 105°C
Current Rating (Amps)	Not specified	5A	2.5A
RoHS Status	ROHS3 Compliant	RoHS Compliant	RoHS Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	Not Applicable
Product Status	Active	Active	Active

Engineering Selection Recommendations

All three parts maintain active product status and satisfy UL94 V-0 flammability and RoHS compliance requirements. Selection between the Molex 0010883141 and its substitutes should be based on:

TE Connectivity 826634-7: Offers extended operating temperature range (-65°C to 105°C) and higher current rating (5A). Gold-plated mating contacts provide enhanced corrosion resistance compared to tin plating. Suitable for applications requiring superior environmental performance or higher current capacity.

3M 929667-02-07-I: Provides the longest contact post length (0.405"), accommodating thicker PCB assemblies or applications requiring extended insertion depth. Gold-plated contacts on both mating and post surfaces. Operating temperature range of -40°C to 105°C and 2.5A current rating address standard industrial requirements.

All parts are RoHS compliant and carry MSL ratings appropriate for standard handling and storage protocols.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 826634-7 be used as a direct replacement for the Molex 0010883141?

A: Yes. Both connectors share identical 14-position, 2-row configuration with 0.100" (2.54mm) pitch, through-hole right-angle mounting, and solder termination. The TE Connectivity part features gold-plated mating contacts and extended operating temperature range, making it functionally compatible for standard board-to-board applications.

Q: What is the primary difference between the 3M 929667-02-07-I and the Molex original?

A: The 3M connector features significantly longer contact posts (0.405" versus 0.110"), designed to accommodate thicker PCB assemblies. Both maintain identical pitch, position count, and mounting orientation. Contact post length should be verified against PCB thickness requirements before selection.

Q: Are there packaging differences between these substitute parts?

A: Yes. The Molex 0010883141 is supplied in tube packaging, while both TE Connectivity 826634-7 and 3M 929667-02-07-I are supplied in bulk packaging. Packaging format does not affect electrical or mechanical compatibility.

Q: Do operating temperature specifications affect substitution eligibility?

A: Operating temperature ranges are provided for the TE Connectivity and 3M parts but not specified for the Molex original. If your application operates within -40°C to 105°C, all three parts are suitable. For applications below -40°C, the TE Connectivity 826634-7 (-65°C minimum) is the appropriate choice.

Q: What is the significance of contact finish differences (tin versus gold)?

A: Tin-plated contacts (Molex) provide standard corrosion resistance for general-purpose applications. Gold-plated contacts (TE Connectivity and 3M) offer enhanced corrosion resistance and lower contact resistance, beneficial in high-reliability or harsh-environment applications. Both finishes are acceptable for standard interconnection requirements.

Q: Can these connectors be used interchangeably in automotive applications?

A: All three parts list automotive applications within their specified use cases and maintain UL94 V-0 flammability compliance. Interchangeability depends on specific automotive qualification requirements, which should be verified against your design specifications and OEM requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message