Molex 0010883062 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The Molex 0010883062 is a through-hole, right-angle rectangular connector header with 6 positions at 2.54mm pitch, designed for board-to-board or cable interconnection applications. This connector is actively manufactured and widely used in automotive, medical, telecommunications, and general-purpose applications. Finding equivalent or substitute parts becomes necessary when addressing supply chain constraints, obsolescence concerns with alternative designs, or when specific performance characteristics of substitute models better align with application requirements.

Substiute Parts

0010883062

MolexIn Stock: 7290010883062 Datasheet

Current PartRFQ

4-103324-0

TE Connectivity AMP ConnectorsIn Stock: 9724-103324-0 Datasheet

MFR RecommendedRFQ

5-146308-3

TE Connectivity AMP ConnectorsIn Stock: 39055-146308-3 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0010883062 is determined by the following critical parameters:

• Pitch - Mating: 0.100" (2.54mm) - must match exactly
• Number of Positions: 6 - must match exactly
• Number of Rows: 2 - must match exactly
• Row Spacing - Mating: 0.100" (2.54mm) - must match exactly
• Mounting Type: Through Hole, Right Angle - must match exactly
• Connector Type: Header, Breakaway - must match exactly
• Contact Type: Male Pin - must match exactly
• Termination: Solder - must match exactly

The substitute parts identified below meet these core electrical and mechanical compatibility criteria. Variations in contact finish, insulation material, and compliance certifications are permissible within the scope of substitution, provided the application requirements do not mandate specific material or certification constraints.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 5-146308-3 is the primary substitute for the Molex 0010883062. This part maintains active product status, achieves ROHS3 compliance matching the original specification, and provides identical mechanical and electrical interface characteristics. The gold contact finish on the mating surface offers enhanced corrosion resistance compared to the tin finish of the original part, which may provide additional reliability in demanding environments. Both parts carry MSL 1 rating and UL94 V-0 flammability certification.

TE Connectivity 4-103324-0 does not qualify as a direct substitute due to a critical mismatch: the part number specifies 80 positions rather than 6 positions. While this connector shares the same pitch, row spacing, mounting type, and termination method, the position count difference renders it mechanically and electrically incompatible with applications designed for the 6-position Molex 0010883062. Additionally, this part carries obsolete product status and does not meet ROHS3 compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 5-146308-3 be used as a direct replacement for the Molex 0010883062?

A: Yes. Both connectors share identical pitch (2.54mm), position count (6), row configuration (2 rows), row spacing (2.54mm), mounting type (through-hole right-angle), and termination method (solder). The connectors are mechanically and electrically compatible. Differences in contact finish material and insulation composition do not affect interface compatibility.

Q: Why is the TE Connectivity 4-103324-0 listed if it cannot substitute the Molex part?

A: The 4-103324-0 is included in the manufacturer's documented substitute list for reference purposes. However, the 80-position configuration makes it incompatible with the 6-position requirement of the original part. This part should not be selected for applications requiring the Molex 0010883062.

Q: What are the implications of the gold contact finish on the TE Connectivity 5-146308-3?

A: The gold mating surface finish provides superior corrosion resistance and oxidation protection compared to the tin finish of the Molex part. This characteristic may extend connector lifespan in corrosive or high-humidity environments. The gold finish does not affect electrical performance or mechanical compatibility.

Q: Does the TE Connectivity 5-146308-3 meet the same compliance standards as the Molex 0010883062?

A: Both parts carry ROHS3 compliance, UL94 V-0 flammability rating, and MSL 1 moisture sensitivity level. Compliance certifications are equivalent between the two parts.

Q: What is the significance of the TE Connectivity 4-103324-0 being marked as obsolete?

A: Obsolete product status indicates that TE Connectivity has discontinued manufacturing this part. New inventory may be limited or unavailable. For applications requiring a 6-position connector, the active-status TE Connectivity 5-146308-3 is the appropriate choice.

Q: Are there packaging differences between the Molex 0010883062 and TE Connectivity 5-146308-3?

A: The Molex part is supplied in standard packaging, while the TE Connectivity 5-146308-3 is packaged in trays. Packaging format does not affect connector performance or compatibility; it relates only to handling, storage, and logistics considerations.