Amphenol RF 000-95700 BNC Connector Jack Equivalent & Substitute Parts

Part Overview

The Amphenol RF 000-95700 is a BNC connector jack designed as a female socket for 50-ohm coaxial applications. This panel-mount component features crimp termination for both center contact and shield, with bayonet locking mechanism. The part is currently active in production inventory with 1169 units in stock.

The TE Connectivity AMP Connectors part 5225398-3 serves as a direct functional equivalent. However, this substitute part carries an obsolete product status, making it necessary to evaluate availability and long-term supply chain implications when considering alternatives.

Substiute Parts

000-95700

Amphenol RFIn Stock: 1242000-95700 Datasheet

Current PartRFQ

5225398-3

TE Connectivity AMP ConnectorsIn Stock: 8435225398-3 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between the Amphenol RF 000-95700 and TE Connectivity AMP Connectors 5225398-3 is based on electrical and mechanical parameter equivalence. Both parts share identical specifications across the following critical parameters:

• Connector style and type (BNC jack, female socket)
• Impedance rating (50 ohms)
• Termination method (crimp for both center contact and shield)
• Mounting configuration (panel mount with bulkhead front side nut)
• Fastening mechanism (bayonet lock)
• Maximum frequency (4 GHz)
• Voltage rating (500 V)
• Mating cycle rating (500 cycles)
• Insertion loss (0.2 dB)
• Dielectric material (PTFE)
• Body material and finish (brass with nickel plating)
• Center contact plating (gold)

The primary distinction between these parts lies in product status and material composition of the center contact. The Amphenol part uses brass center contacts, while the TE Connectivity substitute employs beryllium copper. Both materials are acceptable for the specified electrical performance parameters.

Parameter Comparison

Engineering Selection Recommendations

The Amphenol RF 000-95700 is the preferred selection for new designs and ongoing production due to its active product status. This part maintains full manufacturer support, documented supply chain availability, and compliance with current regulatory standards including ROHS3 and REACH requirements.

The TE Connectivity AMP Connectors 5225398-3 is classified as obsolete and should be considered only for legacy system maintenance or repair applications where original component specifications are mandated. While electrical and mechanical parameters remain equivalent, the obsolete status indicates discontinued manufacturing and potential future unavailability.

Both parts satisfy identical electrical performance requirements for 50-ohm coaxial applications up to 4 GHz with equivalent insertion loss characteristics. Both maintain REACH compliance and export control classification under EAR99. The Amphenol part carries ROHS3 certification, representing the most current regulatory compliance level.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 5225398-3 be used as a direct replacement for the Amphenol RF 000-95700?

A: Yes, from an electrical and mechanical standpoint. Both parts share identical specifications for impedance, frequency response, voltage rating, mating cycles, and insertion loss. The primary consideration is product status: the TE Connectivity part is obsolete, while the Amphenol part is active.

Q: What is the difference between the center contact materials?

A: The Amphenol RF 000-95700 uses brass center contacts, while the TE Connectivity 5225398-3 uses beryllium copper. Both materials, when gold-plated, deliver equivalent electrical performance within the specified parameters. Material selection does not affect the 50-ohm impedance, 4 GHz frequency capability, or insertion loss characteristics.

Q: Are there cable compatibility differences between these parts?

A: The Amphenol part supports RG-55, 142, 223, and 400 cable groups. The TE Connectivity substitute supports RG-55, 55A, 55B, and 223. Both parts accommodate RG-55 and RG-223 cables. Applications requiring RG-142 or RG-400 compatibility should use the Amphenol RF 000-95700.

Q: What is the significance of the obsolete status for the TE Connectivity part?

A: Obsolete status indicates the manufacturer has discontinued production. While existing inventory may be available, long-term supply cannot be guaranteed. For new designs or systems requiring extended production runs, the active Amphenol RF 000-95700 is the appropriate selection.

Q: Do both parts meet current regulatory compliance requirements?

A: Both parts are REACH Affected and classified as EAR99 for export control. The Amphenol RF 000-95700 carries ROHS3 certification, representing the most current regulatory standard. The TE Connectivity part carries RoHS certification. For applications requiring ROHS3 compliance, the Amphenol part is specified.

Q: What is the operating temperature range for these connectors?

A: The Amphenol RF 000-95700 does not specify an operating temperature range in the provided parameters. The TE Connectivity 5225398-3 operates from -55°C to 85°C. For applications with specific temperature requirements, this parameter should be verified with the manufacturer.

Q: Are the included components different between these parts?

A: The TE Connectivity 5225398-3 includes six components: connector, contact, ferrule, gasket, lockwasher, and nut. The Amphenol RF 000-95700 does not specify included components in the provided parameters. Verify component inclusion requirements for your application.