Amphenol RF 000-86350 BNC Connector Jack Equivalent & Substitute Parts

Part Overview

The Amphenol RF 000-86350 is an active BNC connector jack designed for 50-ohm RF applications. This female socket connector features solder termination and panel mount installation with bulkhead front-side nut mounting. The connector operates across a frequency range up to 4 GHz and is rated for 500 volts with 500 mating cycles. The product is actively manufactured and stocked, with ROHS3 compliance and REACH affected status. Substitute parts are identified when equivalent electrical and mechanical parameters are required for applications where the primary part is unavailable or when alternative termination methods are specified.

Substiute Parts

000-86350

Amphenol RFIn Stock: 728000-86350 Datasheet

Current PartRFQ

5413771-3

TE Connectivity AMP ConnectorsIn Stock: 2103935413771-3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Amphenol RF 000-86350 are qualified based on the following core electrical and mechanical parameters:

Electrical Compatibility Parameters:

• Connector style: BNC
• Connector type: Jack, Female Socket
• Impedance: 50 Ohms
• Frequency maximum: 4 GHz
• Voltage rating: 500 V
• Mating cycles: 500

Mechanical Compatibility Parameters:

• Mounting type: Panel Mount
• Mounting feature: Bulkhead - Front Side Nut
• Fastening type: Bayonet Lock
• Number of ports: 1

Regulatory Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Affected

The TE Connectivity AMP Connectors part number 5413771-3 qualifies as a substitute because it maintains all core electrical parameters (BNC jack, 50 ohms, 4 GHz maximum frequency, 500 V rating, 500 mating cycles) and all mechanical parameters (panel mount, bulkhead front-side nut, bayonet lock, single port). The primary difference is the contact termination method: the substitute uses crimp termination instead of solder termination. Both parts maintain ROHS3 compliance and unlimited moisture sensitivity rating.

Parameter Comparison

Engineering Selection Recommendations

Amphenol RF 000-86350 Selection Criteria: The Amphenol RF 000-86350 is selected for applications requiring solder termination to cable assemblies. This connector is suitable for permanent installations where soldered connections provide mechanical stability. The part maintains ROHS3 compliance and operates across the -40°C to 85°C temperature range. Current inventory status shows 712 pieces in stock.

TE Connectivity 5413771-3 Selection Criteria: The TE Connectivity 5413771-3 is selected for applications requiring crimp termination to cable assemblies. This connector is suitable for field-installable or removable cable connections. The part maintains ROHS3 compliance and operates across the extended -55°C to 85°C temperature range, providing broader low-temperature capability. Current inventory status shows 210,300 pieces in stock.

Substitution Basis: Both connectors maintain identical electrical performance at 50 ohms impedance and 4 GHz maximum frequency. Both support 500 volts and 500 mating cycles. Both feature panel mount bulkhead installation with bayonet lock fastening. The selection between these parts depends on the termination method required by the application: solder versus crimp. Both parts carry ROHS3 compliance and REACH affected status, making them suitable for equivalent regulatory environments.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 5413771-3 replace the Amphenol RF 000-86350 in all applications?

A: The TE Connectivity 5413771-3 qualifies as an electrical and mechanical substitute for the Amphenol RF 000-86350 when the application permits crimp termination instead of solder termination. Both connectors maintain identical impedance (50 ohms), frequency rating (4 GHz), voltage rating (500 V), and mating cycle specifications (500 cycles). The primary difference is the cable termination method.

Q: What is the difference between solder and crimp termination?

A: The Amphenol RF 000-86350 uses solder termination, where the cable conductor is soldered to the connector contact. The TE Connectivity 5413771-3 uses crimp termination, where the cable conductor is mechanically compressed into the connector contact. Solder termination is permanent; crimp termination allows for field installation and removal.

Q: Are there temperature range differences between these connectors?

A: The Amphenol RF 000-86350 operates from -40°C to 85°C. The TE Connectivity 5413771-3 operates from -55°C to 85°C. The TE Connectivity part provides extended low-temperature capability. Both connectors operate identically within the -40°C to 85°C range.

Q: Do both connectors support the same cable types?

A: The Amphenol RF 000-86350 supports RG-174, 188, 188A, 316, LMR-100, and M17/119-RG174 cable groups. The TE Connectivity 5413771-3 supports RG-174, 188, and 316 cable groups. The Amphenol RF part supports a broader cable compatibility range.

Q: What is included in each connector package?

A: The Amphenol RF 000-86350 includes 6 pieces per connector: 1 connector body, 1 braid clamp, 1 contact, 1 gasket, and 1 insulator. The TE Connectivity 5413771-3 includes 7 pieces per connector: 1 connector body, 1 contact, 1 ferrule, 1 gasket, 1 lockwasher, 1 nut, and 1 sleeve. The package contents differ due to the different termination methods.

Q: Are both connectors RoHS compliant?

A: Both the Amphenol RF 000-86350 and TE Connectivity 5413771-3 are ROHS3 compliant and REACH affected. Both connectors meet the same regulatory compliance standards.

Q: What is the difference in body material between these connectors?

A: The Amphenol RF 000-86350 uses a brass body with nickel finish. The TE Connectivity 5413771-3 uses a zinc body with nickel finish. Both feature nickel plating for corrosion resistance. The center contact plating differs: silver for the Amphenol RF part and gold for the TE Connectivity part.

Q: Can these connectors be used interchangeably in existing installations?

A: These connectors can be used interchangeably only when the installation method can accommodate the different termination approaches. If the existing installation uses soldered cable connections, the Amphenol RF 000-86350 is required. If the installation uses crimped cable connections, the TE Connectivity 5413771-3 is appropriate. The panel mount bulkhead installation is identical for both connectors.