Amphenol RF 000-5575 BNC Connector Equivalent & Substitute Parts

Part Overview

The Amphenol RF 000-5575 is a BNC Connector Jack, Female Socket rated at 50 Ohms for panel mount applications with solder cup termination. This coaxial RF connector is designed for bayonet lock fastening and operates across a frequency range up to 2 GHz with a maximum voltage rating of 500 V. The part is currently Active in product status with 757 pieces in stock inventory.

Substitute parts are necessary when the primary part becomes unavailable, when design requirements demand extended frequency response, or when alternative manufacturing sources are required for supply chain continuity. The substitute parts listed maintain core functional compatibility while offering variations in material composition, operating temperature ranges, and frequency specifications.

Substiute Parts

000-5575

Amphenol RFIn Stock: 780000-5575 Datasheet

Current PartRFQ

4160

Keystone ElectronicsIn Stock: 12314160 Datasheet

SimilarRFQ

5227716-3

TE Connectivity AMP ConnectorsIn Stock: 9455227716-3 Datasheet

SimilarRFQ

5227754-3

TE Connectivity AMP ConnectorsIn Stock: 23115227754-3 Datasheet

SimilarRFQ

CONBNC004

TE Connectivity LinxIn Stock: 1671CONBNC004 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Amphenol RF 000-5575 is determined by strict adherence to the following core parameters:

Primary Substitution Criteria:

• Connector Style: BNC (mandatory)
• Connector Type: Jack, Female Socket (mandatory)
• Impedance: 50 Ohms (mandatory)
• Contact Termination: Solder Cup (mandatory)
• Mounting Type: Panel Mount (mandatory)
• Mounting Feature: Bulkhead - Rear Side Nut (mandatory)
• Fastening Type: Bayonet Lock (mandatory)
• Number of Ports: 1 (mandatory)

Secondary Compatibility Parameters:

• Frequency - Max: 2 GHz or higher
• Voltage Rating: 500 V or higher
• Operating Temperature: Must encompass or exceed -65°C to 165°C range
• Mating Cycles: 500 or higher

Parts that deviate from the primary substitution criteria are not electrically or mechanically compatible and cannot serve as direct substitutes. The substitute parts identified below meet all primary criteria and maintain compatibility within the specified electrical and mechanical parameters.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 5227754-3 (Recommended Primary Substitute)

The TE Connectivity 5227754-3 is the optimal substitute for the Amphenol RF 000-5575. This part maintains identical core specifications across all primary substitution criteria and operates across an extended frequency range of 4 GHz, providing additional performance headroom. The operating temperature range of -65°C to 165°C matches the original specification exactly. The part is currently Active in product status with 2202 pieces in inventory, ensuring supply availability. RoHS compliance and REACH Affected status align with regulatory requirements. The extended insulation feature provides enhanced electrical performance.

TE Connectivity Linx CONBNC004 (Secondary Substitute)

The TE Connectivity Linx CONBNC004 meets all primary substitution criteria and maintains the 2 GHz frequency specification identical to the original part. This part is Active in product status with 1654 pieces in inventory. However, the operating temperature range of -20°C to 105°C is narrower than the original specification and does not encompass the full -65°C lower temperature limit. This part is suitable for applications where the extended low-temperature performance of the original part is not required. ROHS3 compliance is maintained, though REACH status is Unaffected rather than Affected.

TE Connectivity 5227716-3 (Not Recommended)

The TE Connectivity 5227716-3 is Obsolete in product status and does not meet the full operating temperature specification of the original part, with a maximum operating temperature of only 85°C. The operating temperature range of -55°C to 85°C is insufficient for applications requiring the -65°C to 165°C performance envelope of the Amphenol RF 000-5575. This part should not be selected for new designs or applications requiring the full temperature range of the original specification.

Keystone Electronics 4160 (Not Compatible)

The Keystone Electronics 4160 is a binding post strip and is not a coaxial RF connector. This part does not meet the primary substitution criteria and is not electrically or mechanically compatible with the Amphenol RF 000-5575. This part should not be considered as a substitute.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 5227754-3 be used as a direct replacement for the Amphenol RF 000-5575?

A: Yes. The TE Connectivity 5227754-3 meets all primary substitution criteria including connector style, type, impedance, termination method, mounting configuration, and fastening mechanism. The part maintains identical voltage rating and mating cycle specifications. The extended frequency range of 4 GHz and matching operating temperature range of -65°C to 165°C provide full compatibility. The part is currently Active in product status with adequate inventory.

Q: What is the difference between the TE Connectivity 5227754-3 and TE Connectivity 5227716-3?

A: Both parts are BNC female socket connectors with 50 Ohm impedance and solder cup termination. The primary differences are: (1) The 5227754-3 is Active while the 5227716-3 is Obsolete; (2) The 5227754-3 operates from -65°C to 165°C while the 5227716-3 operates from -55°C to 85°C; (3) The 5227754-3 uses PBT dielectric material while the 5227716-3 uses Fluoropolymer; (4) The 5227754-3 includes a lockwasher while the 5227716-3 includes a solder tag. The 5227754-3 is the preferred substitute due to its Active status and extended temperature range.

Q: Is the TE Connectivity Linx CONBNC004 suitable for all applications where the Amphenol RF 000-5575 is used?

A: The CONBNC004 is suitable for applications that do not require operation below -20°C or above 105°C. The part meets all primary substitution criteria and maintains the 2 GHz frequency specification. However, applications requiring the full -65°C to 165°C operating temperature range of the original part must use the TE Connectivity 5227754-3 or the Amphenol RF 000-5575 itself.

Q: Why is the Keystone Electronics 4160 listed as a substitute?

A: The Keystone Electronics 4160 is not a suitable substitute. This part is a binding post strip with screw terminals and does not meet the primary substitution criteria for a BNC coaxial RF connector. The part should be disregarded when selecting replacements for the Amphenol RF 000-5575.

Q: What packaging options are available for the substitute parts?

A: The Amphenol RF 000-5575 is supplied in Bulk packaging. The TE Connectivity 5227754-3 is also supplied in Bulk packaging. The TE Connectivity Linx CONBNC004 is supplied in Bag packaging. The TE Connectivity 5227716-3 does not specify packaging type. Packaging differences do not affect electrical or mechanical compatibility.

Q: Are all substitute parts RoHS compliant?

A: Yes. The Amphenol RF 000-5575 is ROHS3 Compliant. The TE Connectivity 5227754-3 is RoHS Compliant. The TE Connectivity Linx CONBNC004 is ROHS3 Compliant. The TE Connectivity 5227716-3 is RoHS Compliant. All parts meet RoHS compliance requirements.

Q: What is the difference in dielectric material between the substitute parts?

A: The Amphenol RF 000-5575 uses Polytetrafluoroethylene (PTFE) dielectric material. The TE Connectivity 5227754-3 uses Polybutylene Terephthalate (PBT). The TE Connectivity 5227716-3 uses Fluoropolymer (FP). The TE Connectivity Linx CONBNC004 uses Acrylonitrile Butadiene Styrene (ABS). These material differences do not affect the 50 Ohm impedance specification or electrical compatibility for the specified frequency ranges.

Q: Can the substitute parts handle the same voltage and mating cycle specifications?

A: Yes. The TE Connectivity 5227754-3 and TE Connectivity 5227716-3 both maintain the 500 V voltage rating and 500 mating cycle specification of the original part. The TE Connectivity Linx CONBNC004 maintains the 500 V voltage rating, though mating cycle specification is not provided in the technical data.