Amphenol RF 000-34450 Triaxial Connector Receptacle Equivalent & Substitute Parts

Part Overview

The Amphenol RF 000-34450 is an active triaxial connector receptacle designed for RF coaxial applications requiring 50 Ohm impedance. This female socket connector features panel mount installation with solder cup termination for both center contact and shield. The component is specified for applications operating up to 300 MHz with a voltage rating of 5000 V and temperature range of -65°C to 165°C. Substitute parts are identified when equivalent electrical and mechanical parameters are required for design flexibility, inventory management, or supply chain continuity.

Substiute Parts

000-34450

Amphenol RFIn Stock: 1233000-34450 Datasheet

Current PartRFQ

000-34475

Amphenol RFIn Stock: 1140000-34475 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Amphenol RF 000-34450 are identified based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is based on the following key parameters that must remain identical:

Electrical Parameters:

• Connector style (Triaxial)
• Connector type (Receptacle, Female Socket)
• Impedance (50 Ohms)
• Frequency maximum rating (300 MHz)
• Voltage rating (5000 V)

Mechanical Parameters:

• Contact termination method (Solder Cup)
• Shield termination method (Solder)
• Mounting type (Panel Mount)
• Mounting feature (Bulkhead - Front Side Nut)
• Fastening type (Threaded)

Material & Environmental Parameters:

• Center contact material (Beryllium Copper)
• Body material (Brass)
• Body finish (Nickel)
• Center contact plating (Silver)
• Dielectric material (PTFE)
• Operating temperature range (-65°C to 165°C)
• Ingress protection (Weatherproof)
• Mating cycles (500)

Compliance Parameters:

• RoHS3 compliance
• Moisture sensitivity level (1 - Unlimited)
• REACH affected status
• ECCN classification (EAR99)

Parts meeting all these criteria are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

The Amphenol RF 000-34475 is a direct parametric equivalent to the 000-34450 and functions as a complete substitute. Both parts are active products from Amphenol RF with identical electrical specifications, mechanical configurations, material compositions, and environmental ratings.

Selection Basis:

Both parts meet ROHS3 compliance requirements and carry REACH affected status with EAR99 ECCN classification. The moisture sensitivity level of 1 (Unlimited) indicates no special handling requirements during storage or assembly. Both components are rated for identical operating conditions: -65°C to 165°C temperature range, 5000 V voltage rating, and 300 MHz maximum frequency.

The triaxial receptacle configuration with solder cup termination, panel mount bulkhead installation, and 50 Ohm impedance is maintained across both part numbers. Material specifications including beryllium copper center contacts, brass bodies with nickel finish, and PTFE dielectric are identical.

Selection between 000-34450 and 000-34475 may be based on inventory availability, supply chain logistics, or procurement lead times. Both parts are suitable for direct substitution in RF coaxial applications requiring triaxial receptacle connectors with the specified electrical and mechanical parameters.

Frequently Asked Questions (FAQ)

Q: Can the 000-34475 be used as a direct replacement for the 000-34450?

A: Yes. The 000-34475 is a parametric equivalent with identical electrical specifications (50 Ohm impedance, 300 MHz maximum frequency, 5000 V voltage rating), mechanical configuration (triaxial receptacle, solder cup termination, panel mount bulkhead), material composition (beryllium copper contacts, brass body, nickel finish, PTFE dielectric), and environmental ratings (-65°C to 165°C operating temperature, 500 mating cycles, weatherproof ingress protection).

Q: Are there any differences in compliance or certifications between these parts?

A: No. Both parts carry identical compliance status: ROHS3 compliant, REACH affected, EAR99 ECCN classification, and moisture sensitivity level 1 (Unlimited). Both are active products from Amphenol RF.

Q: What determines whether a part can substitute for the 000-34450?

A: Substitution requires matching all critical parameters: triaxial connector style, receptacle female socket type, 50 Ohm impedance, solder cup contact termination, solder shield termination, panel mount configuration with bulkhead front side nut, threaded fastening, 300 MHz frequency rating, 5000 V voltage rating, -65°C to 165°C operating temperature, beryllium copper center contacts, brass body with nickel finish, silver center contact plating, PTFE dielectric, 500 mating cycles, and weatherproof ingress protection.

Q: What is the packaging configuration for both parts?

A: Both parts are supplied in bulk packaging. Each connector includes 4 pieces: 1 connector, 1 gasket, 1 lockwasher, and 1 nut.

Q: Are there inventory considerations when selecting between these parts?

A: Current inventory shows 1209 pieces of 000-34450 and 1037 pieces of 000-34475 in stock. Selection may be influenced by availability requirements and procurement timelines.

Q: What is the base product number for these connectors?

A: Both parts share the base product number 000-34, indicating they belong to the same product family within the Amphenol RF triaxial connector series.