ZXTP2039FTC Equivalent & Substitute Parts

Part Overview

The ZXTP2039FTC is an active production PNP bipolar junction transistor manufactured by Diodes Incorporated, rated for 60V collector-emitter breakdown voltage and 1A maximum collector current. This surface mount device in SOT-23-3 packaging is designed for general-purpose switching and amplification applications requiring moderate power dissipation up to 350mW. Equivalent and substitute parts are identified to support design flexibility, inventory management, and supply chain continuity for applications utilizing this transistor specification.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Collector Current (Max)	1	A
Collector-Emitter Breakdown Voltage (Max)	60	V
Power Dissipation (Max)	350	mW
Transition Frequency	150	MHz
DC Current Gain (hFE Min)	100	@ 500mA, 5V
Vce Saturation (Max)	600	mV @ 100mA, 1A
Operating Temperature Range	-55 to 150	°C
Package	SOT-23-3	—
Mounting Type	Surface Mount	—

Substitute Part Grouping Explanation

Substitute parts for the ZXTP2039FTC are classified into three categories based on electrical and mechanical compatibility:

Direct Manufacturer Equivalents share identical electrical specifications with the main part, including collector current (1A), collector-emitter breakdown voltage (60V), transition frequency (150MHz), and SOT-23-3 packaging. These parts differ only in packaging format (Tape & Reel versus Cut Tape) or minor variations in power dissipation rating that do not affect functional performance within the specified operating envelope.

Parametric Equivalents maintain all critical electrical parameters (1A collector current, 60V breakdown voltage, 150MHz transition frequency, SOT-23-3 package) but originate from the same manufacturer base product line with different packaging designations.

Manufacturer Recommended Alternatives are cross-manufacturer substitutes that satisfy the core functional requirements but operate within reduced electrical specifications. These parts are suitable for applications where the full 1A collector current and 60V voltage rating are not simultaneously required, or where lower power dissipation is acceptable.

Key parameters determining substitution eligibility:

Collector current rating (1A minimum for direct equivalents)
Collector-emitter breakdown voltage (60V minimum for direct equivalents)
Transition frequency (150MHz minimum for direct equivalents)
Package type (SOT-23-3 for direct equivalents)
Operating temperature range (-55°C to 150°C)

Parameter Comparison

Part Number	Manufacturer	Ic (Max)	Vce(BR)	Power (Max)	fT	hFE (Min)	Vce Sat (Max)	Package	Status
ZXTP2039FTC	Diodes Inc.	1 A	60 V	350 mW	150 MHz	100 @ 500mA, 5V	600 mV @ 100mA, 1A	SOT-23-3	Active
DPBT8105-7	Diodes Inc.	1 A	60 V	600 mW	150 MHz	100 @ 500mA, 5V	600 mV @ 100mA, 1A	SOT-23-3	Active
FMMT591QTA	Diodes Inc.	1 A	60 V	500 mW	150 MHz	100 @ 500mA, 5V	350 mV @ 100mA, 1A	SOT-23-3	Active
FMMT591TA	Diodes Inc.	1 A	60 V	500 mW	150 MHz	100 @ 500mA, 5V	350 mV @ 100mA, 1A	SOT-23-3	Active
ZXTP2039FTA	Diodes Inc.	1 A	60 V	350 mW	150 MHz	100 @ 500mA, 5V	600 mV @ 100mA, 1A	SOT-23-3	Active
2STR2160	STMicroelectronics	1 A	60 V	500 mW	—	180 @ 500mA, 2V	480 mV @ 100mA, 1A	SOT-23-3	Active
2SA1037AKT146R	Rohm Semiconductor	150 mA	50 V	200 mW	140 MHz	180 @ 1mA, 6V	500 mV @ 5mA, 50mA	SOT-23-3	Active
2SA1037AKT146Q	Rohm Semiconductor	150 mA	50 V	200 mW	140 MHz	120 @ 1mA, 6V	500 mV @ 5mA, 50mA	SOT-23-3	Active
2SAR543RTL	Rohm Semiconductor	3 A	50 V	1 W	300 MHz	180 @ 100mA, 3V	400 mV @ 100mA, 2A	TSMT3	Active

Engineering Selection Recommendations

Direct Substitution (Diodes Incorporated Family)

DPBT8105-7, FMMT591QTA, FMMT591TA, and ZXTP2039FTA are direct electrical equivalents to ZXTP2039FTC. All maintain 1A collector current, 60V breakdown voltage, 150MHz transition frequency, and SOT-23-3 packaging. These parts are suitable for one-to-one replacement in existing designs. FMMT591 variants feature improved saturation voltage characteristics (350mV versus 600mV) and are available with automotive qualification (FMMT591QTA). DPBT8105-7 provides increased power dissipation rating (600mW versus 350mW). All parts are ROHS3 compliant and carry MSL-1 moisture sensitivity classification.

Cross-Manufacturer Substitution (STMicroelectronics)

2STR2160 from STMicroelectronics maintains full electrical compatibility with 1A collector current, 60V breakdown voltage, and SOT-23-3 packaging. This part exhibits superior DC current gain (180 minimum) and lower saturation voltage (480mV), making it suitable for applications requiring improved switching efficiency. Transition frequency specification is not provided for this part.

Reduced-Specification Alternatives (Rohm Semiconductor)

2SA1037AKT146R and 2SA1037AKT146Q are suitable only for applications where collector current does not exceed 150mA and collector-emitter voltage does not exceed 50V. These parts operate at reduced power dissipation (200mW) and transition frequency (140MHz). The 2SA1037AKT146R variant provides higher DC current gain (180 minimum) compared to 2SA1037AKT146Q (120 minimum).

2SAR543RTL is not recommended as a direct substitute due to different package type (TSMT3 versus SOT-23-3), despite offering higher current capacity (3A) and power dissipation (1W).

All substitute parts maintain ROHS3 compliance, MSL-1 moisture sensitivity classification, and active product status.

Frequently Asked Questions (FAQ)

Q: Can FMMT591TA be used as a direct replacement for ZXTP2039FTC?

A: Yes. FMMT591TA maintains identical collector current (1A), collector-emitter breakdown voltage (60V), transition frequency (150MHz), and SOT-23-3 packaging. The primary difference is improved saturation voltage (350mV versus 600mV), which reduces power dissipation during saturation. Packaging format differs (Cut Tape & Digi-Reel versus Tape & Reel), but electrical performance is equivalent.

Q: What is the difference between DPBT8105-7 and ZXTP2039FTC?

A: Both parts are manufactured by Diodes Incorporated and share identical electrical specifications for collector current, voltage rating, transition frequency, and DC current gain. DPBT8105-7 provides higher power dissipation rating (600mW versus 350mW), making it suitable for applications with higher thermal requirements. Both use SOT-23-3 packaging.

Q: Can 2SA1037AKT146R replace ZXTP2039FTC in all applications?

A: No. The 2SA1037AKT146R is rated for maximum 150mA collector current and 50V breakdown voltage, compared to 1A and 60V for ZXTP2039FTC. This part is suitable only for applications where collector current does not exceed 150mA and collector-emitter voltage does not exceed 50V. Power dissipation is also limited to 200mW.

Q: Are all substitute parts RoHS compliant?

A: Yes. All listed substitute parts carry ROHS3 compliance certification and MSL-1 moisture sensitivity classification, matching the compliance profile of ZXTP2039FTC.

Q: What is the significance of the saturation voltage difference between ZXTP2039FTC and FMMT591TA?

A: FMMT591TA exhibits lower saturation voltage (350mV versus 600mV) at rated collector current and base current. This results in reduced power dissipation during transistor saturation, which is beneficial in switching applications. The lower saturation voltage may require circuit design verification to ensure base drive current remains adequate.

Q: Can 2STR2160 be used in place of ZXTP2039FTC?

A: Yes. 2STR2160 maintains full electrical compatibility with 1A collector current, 60V breakdown voltage, and SOT-23-3 packaging. This STMicroelectronics part offers superior DC current gain (180 minimum) and lower saturation voltage (480mV), providing improved switching efficiency. Transition frequency is not specified for this part.

Q: Why is 2SAR543RTL not recommended as a substitute?

A: 2SAR543RTL uses TSMT3 package (SC-96) instead of SOT-23-3, making it physically incompatible with existing PCB layouts. Although it offers higher current capacity (3A) and power dissipation (1W), the package difference prevents direct substitution without circuit board redesign.

Q: What packaging options are available for substitute parts?

A: Direct equivalents are available in Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® formats, both maintaining SOT-23-3 package geometry. All parts listed except 2SAR543RTL use SOT-23-3 packaging, ensuring mechanical compatibility with existing designs.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message