V14P175P Equivalent & Substitute Parts

Part Overview

The V14P175P is a 270 V, 6 kA Transient Voltage Suppressor (TVS) varistor manufactured by Littelfuse Inc. in the UltraMOV™ series. This through-hole disc component (14mm) is designed for transient voltage protection in electronic circuits. The part is Active in product status with full RoHS3 compliance and REACH unaffected designation. Equivalent and substitute parts are identified when electrical and mechanical parameters align within the specified tolerances for this varistor category.

Substiute Parts

V14P175P

Littelfuse Inc.In Stock: 2687V14P175P Datasheet

Current PartRFQ

TMOV14RP175E

LittelfuseIn Stock: 2307TMOV14RP175E Datasheet

Parametric EquivalentRFQ

V14E175P

LittelfuseIn Stock: 2332V14E175P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the V14P175P are identified based on strict electrical and mechanical parameter matching within the TVS varistor category. The following key parameters determine substitution eligibility:

• Maximum AC Volts: 175 V
• Maximum DC Volts: 225 V
• Varistor Voltage (Typical): 270 V
• Varistor Voltage Range: 243–297 V
• Current - Surge: 6 kA
• Energy: 70 J
• Number of Circuits: 1
• Capacitance @ 1 MHz: 700 pF
• Operating Temperature Range: −55 to +85°C
• Mounting Type: Through Hole
• Package / Case: Disc 14mm
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Parts meeting all these parameters are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

All three parts—V14P175P, V14E175P, and TMOV14RP175E—are Active products from Littelfuse Inc. with identical electrical specifications and mechanical form factors. Selection among these equivalents may be based on:

• Series preference: UltraMOV™ series (V14P175P, V14E175P) or TMOV® series (TMOV14RP175E)
• Thermal protection feature: TMOV14RP175E includes thermally protected design
• Inventory availability: V14P175P (2600 pcs), V14E175P (2275 pcs), TMOV14RP175E (2234 pcs)
• Regulatory compliance: All parts meet ROHS3 and REACH requirements

Frequently Asked Questions (FAQ)

Q: Can V14E175P be used as a direct replacement for V14P175P?

A: Yes. Both parts share identical electrical parameters (175 V AC, 225 V DC, 270 V typical varistor voltage, 6 kA surge current, 70 J energy) and mechanical specifications (through-hole, disc 14mm package). Both are UltraMOV™ series components with Active product status and full compliance certifications.

Q: What is the difference between TMOV14RP175E and the UltraMOV™ parts?

A: TMOV14RP175E is from the TMOV® series and includes thermally protected design. All electrical and mechanical parameters remain identical to V14P175P and V14E175P. The series designation and thermal protection feature are the primary differentiators.

Q: Are all three parts suitable for the same circuit applications?

A: Yes. All three parts meet the same electrical requirements (175 V AC maximum, 225 V DC maximum, 270 V varistor voltage, 6 kA surge capacity) and operate across the same temperature range (−55 to +85°C). They are mechanically interchangeable in through-hole PCB designs.

Q: Do these parts require any special handling or storage considerations?

A: All three parts have Moisture Sensitivity Level 1 (Unlimited), indicating no special moisture control requirements during storage or handling. Standard component storage practices apply.

Q: Can these parts be used in applications requiring RoHS and REACH compliance?

A: Yes. All three parts are ROHS3 Compliant and REACH Unaffected, meeting regulatory requirements for restricted substance use in electronic equipment.