UTS7106P Equivalent & Substitute Parts

Part Overview

The UTS7106P is a 6-position circular connector receptacle housing manufactured by Souriau-Sunbank by Eaton, designed for panel mount applications with bayonet lock fastening. This component is classified as a receptacle housing for male pins and operates across the temperature range of -40°C to 105°C. The part maintains Active product status and is ROHS3 compliant, making it suitable for applications requiring robust environmental sealing and reliable interconnection in industrial and harsh environments.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained, allowing for component interchangeability based on standardized specifications within the circular connector category.

Substiute Parts

UTS7106P

Souriau-Sunbank by EatonIn Stock: 1066UTS7106P Datasheet

Current PartRFQ

RTS710N6P03

Amphenol Sine Systems CorpIn Stock: 821RTS710N6P03 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the UTS7106P is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Number of positions: 6
• Contact type: Crimp
• Contact size: 20
• Shielding configuration: Unshielded

Mechanical Parameters:

• Shell size - insert: 10-6
• Mounting type: Panel mount
• Mounting feature: Bulkhead - front side nut
• Fastening type: Bayonet lock
• Connector type: Receptacle housing for male pins
• Housing color: Black
• Shell material: Thermoplastic

Environmental & Compliance Parameters:

• Ingress protection: IP67/IP69K
• Flammability rating: UL94 V-0
• RoHS status: ROHS3 compliant

The substitute part RTS710N6P03 maintains equivalence across all critical parameters, enabling direct substitution in applications where the UTS7106P is specified.

Parameter Comparison

Engineering Selection Recommendations

Both the UTS7106P and RTS710N6P03 maintain Active product status and full ROHS3 compliance, confirming ongoing manufacturer support and regulatory alignment. The parts are electrically and mechanically equivalent across all specified parameters, including shell size, contact configuration, mounting interface, and environmental sealing ratings.

The RTS710N6P03 operates across an extended temperature range of -40°C to 125°C compared to the UTS7106P range of -40°C to 105°C. This extended upper temperature limit provides additional thermal margin in applications approaching the upper boundary of the UTS7106P specification.

The RTS710N6P03 includes integrated components (gasket, nut, and O-ring) as part of the standard package, whereas the UTS7106P is supplied without contacts. This packaging difference does not affect substitution eligibility but should be considered during procurement planning.

Frequently Asked Questions (FAQ)

Q: Can RTS710N6P03 directly replace UTS7106P in existing designs?

A: Yes. Both parts maintain identical specifications for shell size (10-6), number of positions (6), contact type (crimp, size 20), mounting configuration (panel mount, bulkhead front side nut), fastening method (bayonet lock), and environmental protection (IP67/IP69K). Mechanical and electrical interfaces are equivalent.

Q: What is the significance of the extended operating temperature range in RTS710N6P03?

A: The RTS710N6P03 operates to 125°C versus 105°C for the UTS7106P. This extended range provides additional thermal headroom for applications operating near the upper temperature boundary. Applications within the UTS7106P range (-40°C to 105°C) are fully compatible with either part.

Q: Are there differences in the included components?

A: The RTS710N6P03 includes gasket, nut, and O-ring components in the standard package. The UTS7106P is supplied as a housing without these accessories. Both parts require separate contact procurement. Verify accessory requirements during component selection.

Q: Do both parts meet the same compliance standards?

A: Yes. Both UTS7106P and RTS710N6P03 are ROHS3 compliant and carry UL94 V-0 flammability ratings. Both maintain Active product status with ongoing manufacturer support.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is based on equivalence in shell size (10-6), position count (6), contact specifications (crimp, size 20), mounting type (panel mount, bulkhead), fastening method (bayonet lock), ingress protection (IP67/IP69K), and material specifications (thermoplastic, black, unshielded). All parameters are identical between the two parts.