Equivalent & Substitute Parts for UBX2D220MPL

Part Overview

The UBX2D220MPL is a 22 µF, 200 V aluminum electrolytic capacitor in radial, can package manufactured by Nichicon. This component is classified as obsolete, making substitute parts necessary for ongoing production and maintenance applications. The part is designed for automotive applications requiring reliable energy storage and filtering in high-voltage circuits.

Substiute Parts

UBX2D220MPL

NichiconIn Stock: 847UBX2D220MPL Datasheet

Current PartRFQ

200RX3022M10X16

RubyconIn Stock: 1660200RX3022M10X16 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the UBX2D220MPL is determined by the following critical parameters:

• Capacitance Value: 22 µF (exact match required)
• Voltage Rating: 200 V (minimum requirement; higher ratings acceptable)
• Tolerance: ±20% (standard tolerance for aluminum electrolytic capacitors)
• Package Type: Radial, Can with Through Hole mounting
• Lead Spacing: 0.197" (5.00mm) for PCB compatibility
• Physical Dimensions: 0.394" diameter can with compatible height
• Polarization: Polar (standard for aluminum electrolytic capacitors)
• Compliance: ROHS3 Compliant, REACH Unaffected

The substitute part 200RX3022M10X16 (Rubycon RX30 series) meets all critical electrical and mechanical parameters required for direct substitution in automotive applications.

Parameter Comparison

Engineering Selection Recommendations

The 200RX3022M10X16 (Rubycon RX30 series) is a direct substitute for the obsolete UBX2D220MPL. Selection is based on the following factors:

• Product Status: The substitute part is active and in production, ensuring long-term availability and supply chain continuity.
• Compliance: Both parts are ROHS3 Compliant and REACH Unaffected, meeting regulatory requirements for automotive applications.
• Electrical Equivalence: Identical capacitance (22 µF), tolerance (±20%), and voltage rating (200 V) ensure functional compatibility.
• Mechanical Compatibility: Matching lead spacing (5.00mm) and can diameter (10.00mm) allow direct PCB mounting without layout modifications.
• Automotive Certification: The substitute part carries AEC-Q200 rating, confirming suitability for automotive environments.
• Physical Fit: The substitute part height (18.00mm) is lower than the original (21.50mm), providing improved PCB clearance without compromising performance.

Frequently Asked Questions (FAQ)

Q: Can the 200RX3022M10X16 be used as a direct replacement for UBX2D220MPL?

A: Yes. Both parts share identical capacitance (22 µF), voltage rating (200 V), tolerance (±20%), lead spacing (5.00mm), and can diameter (10.00mm). The substitute part is mechanically and electrically compatible for through-hole PCB mounting.

Q: What are the differences in operating temperature ranges?

A: The UBX2D220MPL operates from -40°C to 150°C, while the 200RX3022M10X16 operates from -25°C to 130°C. For applications requiring operation below -25°C or above 130°C, the original part specifications must be verified against circuit requirements.

Q: How do the ripple current ratings compare?

A: The UBX2D220MPL has higher ripple current ratings (170 mA @ 120 Hz, 306 mA @ 100 kHz) compared to the 200RX3022M10X16 (120 mA @ 120 Hz, 240 mA @ 100 kHz). Circuit designs must confirm that the substitute part's ripple current capacity is sufficient for the intended application.

Q: What is the significance of the height difference?

A: The substitute part (18.00mm height) is 4.60mm shorter than the original (21.50mm height). This reduced height improves PCB clearance and may simplify board layout. No design modifications are required for this dimensional change.

Q: Are both parts suitable for automotive applications?

A: Yes. Both parts are rated for automotive use. The substitute part includes AEC-Q200 certification, confirming compliance with automotive quality and reliability standards.

Q: What is the difference in lifetime specifications?

A: The UBX2D220MPL is rated for 1000 hours at 150°C, while the 200RX3022M10X16 is rated for 2000 hours at 130°C. The substitute part offers extended lifetime at a lower temperature threshold. Circuit thermal conditions must be evaluated to determine which specification applies to the intended application.