TS8P06GHC2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS8P06GHC2G is a single-phase bridge rectifier manufactured by Taiwan Semiconductor Corporation, rated for 800 V peak reverse voltage and 8 A average rectified current. This component is designed for through-hole mounting in automotive-grade applications and carries AEC-Q101 qualification. The TS8P06GHC2G is currently discontinued at DiGi Electronics, necessitating identification of equivalent substitute parts that maintain identical electrical and mechanical specifications for continued system support and procurement.

Substiute Parts

TS8P06GHC2G

Taiwan Semiconductor CorporationIn Stock: 805TS8P06GHC2G Datasheet

Current PartRFQ

TS8P06GH

Taiwan Semiconductor CorporationIn Stock: 2341TS8P06GH Datasheet

DirectRFQ

TS8P06G

Taiwan Semiconductor CorporationIn Stock: 2038TS8P06G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS8P06GHC2G are identified based on strict equivalence across all critical electrical and mechanical parameters. The substitution logic is based on the following criteria:

Electrical Parameters (Must Match):

• Voltage - Peak Reverse (Max): 800 V
• Current - Average Rectified (Io): 8 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 8 A
• Current - Reverse Leakage @ Vr: 10 µA @ 800 V
• Operating Temperature Range: -55°C ~ 150°C (TJ)

Mechanical Parameters (Must Match):

• Diode Type: Single Phase
• Technology: Standard
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P

Compliance & Certification (Must Match):

• Grade: Automotive
• Qualification: AEC-Q101
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Parts meeting all these criteria are classified as direct substitutes. Packaging format (tube versus other configurations) does not affect electrical or mechanical compatibility and does not preclude substitution.

Parameter Comparison

Engineering Selection Recommendations

TS8P06GH is the primary recommended substitute for the discontinued TS8P06GHC2G. This part maintains full electrical and mechanical equivalence, carries identical automotive-grade AEC-Q101 qualification, and is currently in active production status with confirmed inventory availability. The TS8P06GH is supplied in tube packaging, which is compatible with standard component handling and assembly processes.

TS8P06G is a secondary parametric equivalent that matches all critical electrical specifications and mechanical form factor. However, automotive grade and AEC-Q101 qualification status are not specified in the available data for this part number variant. Selection of TS8P06G requires confirmation of automotive compliance requirements for the target application.

Both substitute parts are manufactured by Taiwan Semiconductor Corporation under the same base product number (TS8P06) and share identical TS-6P package geometry, ensuring direct pin-for-pin and form-factor compatibility with existing PCB designs and through-hole assembly processes.

Frequently Asked Questions (FAQ)

Q: Can TS8P06GH be used as a direct replacement for TS8P06GHC2G?

A: Yes. The TS8P06GH is electrically and mechanically equivalent to the TS8P06GHC2G across all specified parameters, including voltage rating (800 V), current rating (8 A), forward voltage drop (1.1 V @ 8 A), reverse leakage current (10 µA @ 800 V), operating temperature range (-55°C ~ 150°C), and package configuration (4-SIP, TS-6P through-hole). Both parts carry AEC-Q101 automotive qualification and ROHS3 compliance.

Q: What is the difference between TS8P06GH and TS8P06G?

A: Both parts share identical electrical specifications and mechanical packaging. The primary difference is in the product designation suffix. TS8P06G does not have documented automotive grade or AEC-Q101 qualification in the provided data, whereas TS8P06GH explicitly carries these certifications. For automotive applications requiring AEC-Q101 compliance, TS8P06GH is the appropriate selection.

Q: Does packaging format affect substitution compatibility?

A: No. The TS8P06GHC2G and TS8P06GH differ in packaging format (the main part does not specify packaging format; the substitute is supplied in tube). This difference does not affect electrical performance, mechanical fit, or assembly compatibility. Both parts use the identical TS-6P through-hole package geometry.

Q: Are these parts suitable for automotive applications?

A: Yes. Both TS8P06GH and TS8P06GHC2G are automotive-grade components qualified to AEC-Q101 standard. TS8P06G does not have documented automotive qualification in the provided data.

Q: What is the operating temperature range for these bridge rectifiers?

A: The operating temperature range is -55°C to 150°C (junction temperature). This specification is identical across all three part numbers.

Q: Are these parts RoHS compliant?

A: Yes. All three parts (TS8P06GHC2G, TS8P06GH, and TS8P06G) are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity rating.