TS40P06GHC2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS40P06GHC2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 800 V peak reverse voltage and 40 A average rectified current. This component is designed for through-hole mounting in automotive-grade applications and carries AEC-Q101 qualification. The part is currently discontinued at DiGi Electronics, necessitating identification of equivalent substitute components that maintain identical electrical and mechanical specifications for continued system support and procurement.

Substiute Parts

TS40P06GHC2G

Taiwan Semiconductor CorporationIn Stock: 1084TS40P06GHC2G Datasheet

Current PartRFQ

TS40P06GH

Taiwan Semiconductor CorporationIn Stock: 2185TS40P06GH Datasheet

DirectRFQ

TS40P06G

Taiwan Semiconductor CorporationIn Stock: 2384TS40P06G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS40P06GHC2G are identified based on strict equivalence across all critical electrical and mechanical parameters. The substitution logic is based on the following criteria:

Electrical Parameters (Must Match):

• Voltage - Peak Reverse (Max): 800 V
• Current - Average Rectified (Io): 40 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 20 A
• Current - Reverse Leakage @ Vr: 10 µA @ 800 V
• Operating Temperature Range: -55°C ~ 150°C (TJ)

Mechanical Parameters (Must Match):

• Diode Type: Single Phase
• Technology: Standard
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P
• Grade: Automotive
• Qualification: AEC-Q101

Compliance Parameters (Must Match):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

All substitute parts listed maintain identical specifications across these parameters and are manufactured by Taiwan Semiconductor Corporation under the TS40P06 base product number.

Parameter Comparison

Engineering Selection Recommendations

TS40P06GH is the primary substitute for TS40P06GHC2G. This part maintains full electrical and mechanical equivalence, carries active product status, and includes automotive-grade classification with AEC-Q101 qualification. The TS40P06GH is supplied in tube packaging and has higher inventory availability (2164 pcs), supporting reliable procurement for production and replacement applications.

TS40P06G is a parametric equivalent that maintains all critical electrical specifications and mechanical compatibility. This part is also active and ROHS3 compliant with unlimited moisture sensitivity rating. However, automotive grade and AEC-Q101 qualification status are not specified for this variant. The TS40P06G is supplied in tube packaging with substantial inventory availability (2275 pcs).

For applications requiring confirmed automotive-grade compliance and AEC-Q101 qualification, TS40P06GH is the appropriate selection. For applications where automotive qualification is not a requirement, TS40P06G provides electrical and mechanical equivalence with equivalent availability.

Frequently Asked Questions (FAQ)

Q: Can TS40P06GH be used as a direct replacement for TS40P06GHC2G?

A: Yes. TS40P06GH is electrically and mechanically equivalent to TS40P06GHC2G across all specified parameters, including voltage rating (800 V), current rating (40 A), forward voltage drop (1.1 V @ 20 A), reverse leakage current (10 µA @ 800 V), operating temperature range (-55°C ~ 150°C), and package configuration (4-SIP, TS-6P through-hole). Both parts carry automotive-grade classification and AEC-Q101 qualification.

Q: What is the difference between TS40P06GH and TS40P06G?

A: Both parts are electrically equivalent with identical voltage, current, and thermal specifications. The primary difference is that TS40P06GH includes documented automotive-grade classification and AEC-Q101 qualification, while TS40P06G does not specify these qualifications in the provided data. Both are supplied in tube packaging and are currently active products.

Q: Are the substitute parts compatible with the original through-hole PCB layout?

A: Yes. All substitute parts use the identical 4-SIP, TS-6P package configuration and through-hole mounting type as the TS40P06GHC2G, ensuring direct compatibility with existing PCB designs without layout modifications.

Q: Why is TS40P06GHC2G discontinued?

A: The TS40P06GHC2G is discontinued at DiGi Electronics. Active equivalent products (TS40P06GH and TS40P06G) are available from the same manufacturer and provide full functional and electrical equivalence for continued system support.

Q: Are the substitute parts RoHS compliant?

A: Yes. Both TS40P06GH and TS40P06G are ROHS3 compliant with moisture sensitivity level 1 (unlimited), matching the compliance status of the original TS40P06GHC2G.

Q: What is the operating temperature range for these bridge rectifiers?

A: All parts in this equivalence group operate across the temperature range of -55°C to 150°C (junction temperature), supporting automotive and industrial applications across extended environmental conditions.