TS25P06G C2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS25P06G C2G is a single-phase bridge rectifier diode rated for 800 V peak reverse voltage and 25 A average rectified current in a through-hole TS-6P package. This component is classified as discontinued at DiGi Electronics, necessitating identification of equivalent substitute parts for ongoing applications and new designs. The part operates across a temperature range of -55°C to 150°C and meets ROHS3 compliance requirements.

Substiute Parts

TS25P06G C2G

Taiwan Semiconductor CorporationIn Stock: 1097TS25P06G C2G Datasheet

Current PartRFQ

TS25P06G

Taiwan Semiconductor CorporationIn Stock: 1396TS25P06G Datasheet

DirectRFQ

TS25P06GH

Taiwan Semiconductor CorporationIn Stock: 2124TS25P06GH Datasheet

Parametric EquivalentRFQ

DFB2580

onsemiIn Stock: 1465DFB2580 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS25P06G C2G are identified based on strict electrical and mechanical parameter matching. The following criteria determine substitution eligibility:

Primary Matching Parameters:

• Diode Type: Single Phase
• Voltage - Peak Reverse (Max): 800 V
• Current - Average Rectified (Io): 25 A
• Voltage - Forward (Vf) (Max): 1.1 V
• Current - Reverse Leakage @ Vr: 10 µA @ 800 V
• Operating Temperature Range: -55°C ~ 150°C (TJ)
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P

All identified substitute parts meet these core electrical specifications and physical package requirements, ensuring direct functional equivalence in applications designed for the TS25P06G C2G.

Parameter Comparison

Engineering Selection Recommendations

TS25P06G (Taiwan Semiconductor Corporation)

This part is the direct manufacturer equivalent with active product status. It meets all electrical and mechanical parameters of the TS25P06G C2G. The forward voltage specification differs only in the test current condition (1.1 V @ 15 A versus 1.1 V @ 25 A), with both meeting the maximum 1.1 V specification. This part is suitable for replacement in existing applications and new designs.

TS25P06GH (Taiwan Semiconductor Corporation)

This part is a parametric equivalent with automotive-grade qualification and AEC-Q101 certification. It maintains identical electrical specifications to the main part, including forward voltage at 25 A. Active product status and automotive qualification make this part suitable for applications requiring enhanced reliability or automotive compliance. The automotive grade designation indicates additional screening and quality assurance.

DFB2580 (onsemi)

This part is a parametric equivalent from an alternative manufacturer with identical electrical specifications. Product status is classified as "Not For New Designs," indicating this part is in mature or end-of-life phase. This part is suitable for replacement in existing applications where supply continuity is required but not recommended for new design implementations.

Frequently Asked Questions (FAQ)

Q: Can TS25P06G be used as a direct replacement for TS25P06G C2G?

A: Yes. The TS25P06G meets all electrical and mechanical parameters of the TS25P06G C2G. Both parts are rated for 800 V peak reverse voltage, 25 A average rectified current, and use the same TS-6P through-hole package. The primary difference is product status: TS25P06G is active while TS25P06G C2G is discontinued.

Q: What is the difference between TS25P06G and TS25P06GH?

A: Both parts meet identical electrical specifications for voltage, current, and temperature range. The TS25P06GH carries automotive-grade qualification and AEC-Q101 certification, indicating enhanced reliability screening and quality assurance. Selection between these parts depends on application requirements for automotive compliance.

Q: Is DFB2580 suitable for new designs?

A: No. DFB2580 is classified as "Not For New Designs." While it meets all electrical and mechanical parameters of the TS25P06G C2G, this designation indicates the part is in mature or end-of-life phase. DFB2580 is suitable for replacement in existing applications but should not be selected for new design implementations.

Q: Are all substitute parts in the same physical package?

A: Yes. All substitute parts use the 4-SIP, TS-6P through-hole package, ensuring mechanical compatibility with existing PCB layouts and mounting hardware.

Q: What compliance standards apply to these parts?

A: All parts are ROHS3 compliant and REACH unaffected. TS25P06GH additionally carries AEC-Q101 automotive qualification. All parts have moisture sensitivity level 1 (unlimited), indicating no special moisture handling requirements.

Q: Can these parts be used interchangeably in the same circuit?

A: Yes, within the constraints of product status. TS25P06G and TS25P06GH are suitable for direct substitution in applications designed for TS25P06G C2G. DFB2580 is electrically equivalent but should only be used for replacement in existing applications, not new designs.