TS25P03G C2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS25P03G C2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 200 V peak reverse voltage and 25 A average rectified current. This component is classified as discontinued at DiGi Electronics, necessitating identification of equivalent and substitute parts for ongoing design requirements and procurement needs. The part operates across a temperature range of -55°C to 150°C and is housed in a 4-SIP, TS-6P through-hole package configuration.

Substiute Parts

TS25P03G C2G

Taiwan Semiconductor CorporationIn Stock: 1189TS25P03G C2G Datasheet

Current PartRFQ

TS25P03G

Taiwan Semiconductor CorporationIn Stock: 775TS25P03G Datasheet

DirectRFQ

TS25P03GH

Taiwan Semiconductor CorporationIn Stock: 917TS25P03GH Datasheet

Parametric EquivalentRFQ

DFB2520

Fairchild SemiconductorIn Stock: 2229DFB2520 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TS25P03G C2G is determined by strict equivalence across the following critical parameters:

• Voltage - Peak Reverse (Max): 200 V
• Current - Average Rectified (Io): 25 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 25 A
• Current - Reverse Leakage @ Vr: 10 µA @ 200 V
• Diode Type: Single Phase
• Technology: Standard
• Operating Temperature Range: -55°C to 150°C (TJ)
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P

All identified substitute parts maintain identical electrical specifications and mechanical packaging. Substitutes are grouped into direct manufacturer equivalents and parametric equivalents based on product status and available certifications.

Parameter Comparison

Engineering Selection Recommendations

TS25P03G (Direct Equivalent)

The TS25P03G represents the direct equivalent to the discontinued TS25P03G C2G. This part maintains identical electrical and mechanical specifications while offering active product status. It is ROHS3 compliant and carries MSL 1 rating. This part is the primary selection for direct replacement in non-automotive applications.

TS25P03GH (Parametric Equivalent with Automotive Qualification)

The TS25P03GH is a parametric equivalent offering identical electrical performance and packaging. This variant includes automotive-grade qualification (AEC-Q101), making it suitable for applications requiring automotive-level reliability and traceability. Selection of this part is appropriate when automotive compliance or enhanced qualification requirements are specified.

DFB2520 (Parametric Equivalent - Alternative Manufacturer)

The DFB2520 manufactured by Fairchild Semiconductor provides parametric equivalence across all critical electrical and mechanical parameters. This part is active and available in higher inventory quantities. Selection of this part is appropriate when supply chain diversification or alternative manufacturer sourcing is required. RoHS and MSL compliance status are not specified for this part.

Frequently Asked Questions (FAQ)

Q: Can TS25P03G be used as a direct replacement for TS25P03G C2G?

A: Yes. The TS25P03G is a direct equivalent offering identical electrical specifications (200 V peak reverse voltage, 25 A average rectified current, 1.1 V forward voltage at 25 A, 10 µA reverse leakage at 200 V), identical operating temperature range (-55°C to 150°C), and identical 4-SIP, TS-6P through-hole packaging. Both parts are ROHS3 compliant with MSL 1 rating.

Q: What is the difference between TS25P03G and TS25P03GH?

A: Both parts are parametrically identical in electrical performance and packaging. The TS25P03GH carries automotive-grade qualification (AEC-Q101) and is designated as automotive-grade, whereas the TS25P03G is standard-grade. Selection between these parts depends on whether automotive qualification is required for the application.

Q: Can DFB2520 replace TS25P03G C2G?

A: Yes. The DFB2520 manufactured by Fairchild Semiconductor maintains identical electrical specifications and 4-SIP, TS-6P through-hole packaging. All critical parameters including voltage rating, current rating, forward voltage, reverse leakage, and operating temperature range are equivalent. The DFB2520 is available from an alternative manufacturer, providing supply chain flexibility.

Q: Are all substitute parts through-hole mounted?

A: Yes. All identified substitute parts (TS25P03G, TS25P03GH, and DFB2520) are through-hole mounted in 4-SIP, TS-6P package configuration, ensuring mechanical compatibility with existing PCB designs.

Q: What compliance certifications apply to these substitute parts?

A: The TS25P03G and TS25P03GH are ROHS3 compliant with MSL 1 (Unlimited) rating. The TS25P03GH additionally carries AEC-Q101 automotive qualification. RoHS and MSL compliance status for the DFB2520 are not specified in available documentation.

Q: Which substitute part should be selected for automotive applications?

A: The TS25P03GH is the appropriate selection for automotive applications, as it carries AEC-Q101 qualification and automotive-grade designation while maintaining identical electrical and mechanical specifications to the original part.

Q: Are there inventory considerations when selecting a substitute?

A: Inventory availability varies among substitutes. The DFB2520 is available in the highest quantity (2200 pcs), followed by TS25P03GH (854 pcs) and TS25P03G (726 pcs). Selection based on inventory should be coordinated with supply chain requirements and lead time considerations.