TS15P05G C2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS15P05G C2G is a single-phase bridge rectifier manufactured by Taiwan Semiconductor Corporation, rated for 600 V peak reverse voltage and 15 A average rectified current. This component is designed for through-hole mounting applications requiring standard bridge rectification in the TS-6P package configuration.

The TS15P05G C2G has been discontinued at DiGi Electronics. Identifying equivalent and substitute parts is necessary to maintain design continuity and ensure component availability for production, repair, and maintenance applications.

Substiute Parts

TS15P05G C2G

Taiwan Semiconductor CorporationIn Stock: 1037TS15P05G C2G Datasheet

Current PartRFQ

TS15P05G

Taiwan Semiconductor CorporationIn Stock: 1585TS15P05G Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of bridge rectifier diodes is determined by electrical and mechanical compatibility across the following critical parameters:

Electrical Parameters:

• Voltage - Peak Reverse (Max): Must equal or exceed 600 V
• Current - Average Rectified (Io): Must equal or exceed 15 A
• Voltage - Forward (Vf) (Max) @ If: Must not exceed 1.1 V @ 15 A
• Current - Reverse Leakage @ Vr: Must not exceed 10 µA @ 600 V

Mechanical Parameters:

• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Substitute parts must satisfy all electrical parameters within specified limits and maintain identical mechanical and compliance characteristics to ensure direct functional replacement without circuit redesign.

Parameter Comparison

Engineering Selection Recommendations

The TS15P05G (without C2G designation) is the direct substitute for the discontinued TS15P05G C2G. Both parts are manufactured by Taiwan Semiconductor Corporation and share identical electrical specifications across all critical parameters: 600 V peak reverse voltage, 15 A average rectified current, 1.1 V forward voltage drop at 15 A, and 10 µA reverse leakage current at 600 V.

The substitute part maintains the same through-hole mounting configuration and TS-6P package footprint, ensuring mechanical compatibility with existing printed circuit board designs. Both parts are ROHS3 compliant and carry REACH Unaffected status, satisfying regulatory requirements for industrial and commercial applications.

The substitute part features an extended operating temperature range of -55°C to 150°C compared to the main part's -55°C to 125°C range, providing enhanced thermal performance margin. The substitute part is currently in active production status with confirmed inventory availability, whereas the main part is discontinued.

Selection of the TS15P05G substitute is appropriate for all applications previously designed with the TS15P05G C2G, with no circuit modifications required.

Frequently Asked Questions (FAQ)

Q: What is the primary reason for substituting the TS15P05G C2G?

A: The TS15P05G C2G has been discontinued at DiGi Electronics. The TS15P05G substitute is the active equivalent part from the same manufacturer with identical electrical and mechanical specifications.

Q: Are the electrical specifications identical between the main part and substitute?

A: Yes. Both parts share identical voltage ratings (600 V peak reverse), current ratings (15 A average rectified), forward voltage characteristics (1.1 V @ 15 A), and reverse leakage specifications (10 µA @ 600 V).

Q: Will the substitute part fit the existing PCB design?

A: Yes. Both parts use the same through-hole mounting type and TS-6P package configuration, ensuring direct mechanical compatibility without PCB redesign.

Q: What is the difference in operating temperature range?

A: The substitute part operates from -55°C to 150°C, compared to the main part's -55°C to 125°C range. This extended upper temperature limit provides additional thermal margin for the substitute part.

Q: Are both parts compliant with environmental regulations?

A: Yes. Both the main part and substitute are ROHS3 compliant and carry REACH Unaffected status, meeting current environmental and regulatory requirements.

Q: What packaging format is available for the substitute part?

A: The substitute part TS15P05G is supplied in tube packaging, whereas the main part TS15P05G C2G packaging format was not specified in the original documentation.

Q: Can the substitute part be used in new designs?

A: Yes. The TS15P05G substitute is in active production status and is suitable for both replacement applications and new design implementations requiring a 600 V, 15 A single-phase bridge rectifier in the TS-6P package.