TS10P06G C2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS10P06G C2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation. This component is classified as a standard bridge rectifier rated for 800 V peak reverse voltage and 10 A average rectified current, housed in a 4-SIP through-hole package (TS-6P). The part maintains Active product status and is ROHS3 compliant with unlimited moisture sensitivity level (MSL 1).

Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity. Alternative part numbers within the same electrical and mechanical specifications enable direct replacement without circuit redesign.

Substiute Parts

TS10P06G C2G

Taiwan Semiconductor CorporationIn Stock: 1079TS10P06G C2G Datasheet

Current PartRFQ

T10JA06G-K

Taiwan Semiconductor CorporationIn Stock: 2475T10JA06G-K Datasheet

Parametric EquivalentRFQ

TS10P06G

Taiwan Semiconductor CorporationIn Stock: 2089TS10P06G Datasheet

Parametric EquivalentRFQ

TS10P06GH

Taiwan Semiconductor CorporationIn Stock: 2089TS10P06GH Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS10P06G C2G are identified based on strict electrical and mechanical parameter matching. The substitution criteria are:

Primary Matching Parameters:

• Voltage - Peak Reverse (Max): 800 V
• Current - Average Rectified (Io): 10 A
• Diode Type: Single Phase
• Technology: Standard
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P
• Operating Temperature Range: -55°C to 150°C (TJ)

Secondary Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

All identified substitute parts meet these electrical and mechanical requirements and are manufactured by Taiwan Semiconductor Corporation. Variations in reverse leakage current and packaging format (tube vs. standard) do not affect functional equivalence within the specified parameter set.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain Active product status and full ROHS3 compliance with REACH unaffected designation. Selection among equivalent parts is determined by application-specific requirements and supply chain availability.

TS10P06G: Direct parametric equivalent with identical electrical specifications and standard packaging. Suitable for general industrial applications requiring 800 V, 10 A bridge rectification.

TS10P06GH: Automotive-grade variant qualified to AEC-Q101 standard. Specified for applications requiring automotive-level reliability and qualification documentation. Electrical parameters remain identical to the base TS10P06G C2G.

T10JA06G-K: Parametric equivalent with improved reverse leakage current specification (5 µA @ 800 V versus 10 µA @ 800 V). Suitable for applications where lower leakage current provides performance advantage. Tube packaging format available.

All parts operate across the full -55°C to 150°C temperature range and maintain unlimited moisture sensitivity level (MSL 1), eliminating special handling requirements during storage and assembly.

Frequently Asked Questions (FAQ)

Q: Can TS10P06G C2G be directly replaced with TS10P06G?

A: Yes. Both parts share identical electrical specifications (800 V, 10 A, 1.1 V forward voltage, 10 µA reverse leakage) and mechanical packaging (4-SIP, TS-6P through-hole). The primary difference is packaging format (standard versus tube). Direct substitution is supported without circuit modification.

Q: What is the difference between TS10P06G and TS10P06GH?

A: TS10P06GH is an automotive-grade variant qualified to AEC-Q101 standard. Electrical and mechanical specifications are identical. TS10P06GH is specified for applications requiring automotive reliability qualification. Standard industrial applications may use either part.

Q: Is T10JA06G-K compatible with TS10P06G C2G?

A: Yes. T10JA06G-K meets all electrical and mechanical requirements for direct substitution. The reverse leakage current is lower (5 µA @ 800 V versus 10 µA @ 800 V), which represents improved performance. All other parameters, including voltage rating, current rating, forward voltage, and temperature range, are identical.

Q: Are there temperature or environmental restrictions for these parts?

A: No. All substitute parts operate across -55°C to 150°C junction temperature range and maintain MSL 1 (unlimited moisture sensitivity level). No special storage, handling, or environmental controls are required beyond standard component storage practices.

Q: Do all substitute parts meet RoHS and REACH compliance?

A: Yes. All identified substitute parts are ROHS3 compliant and REACH unaffected. Compliance documentation is consistent across TS10P06G C2G, TS10P06G, TS10P06GH, and T10JA06G-K.

Q: What packaging formats are available?

A: TS10P06G C2G is supplied in standard packaging. TS10P06G, TS10P06GH, and T10JA06G-K are available in tube packaging. All parts use identical 4-SIP, TS-6P through-hole package configuration, ensuring mechanical compatibility on printed circuit boards.

Q: Can these parts be used in automotive applications?

A: TS10P06GH is specifically qualified for automotive applications (AEC-Q101). TS10P06G C2G, TS10P06G, and T10JA06G-K are standard industrial-grade parts. Automotive application requirements should specify TS10P06GH.