TNPW0805976RBEEA Equivalent & Substitute Parts

Part Overview

The TNPW0805976RBEEA is a 976 Ohms ±0.1% thin film chip resistor manufactured by Vishay Dale in the 0805 (2012 Metric) package. This component is rated for 0.26W power dissipation and is designed for automotive applications with AEC-Q200 qualification, anti-sulfur coating, and moisture resistance. The part is currently active in production with 1011 units in stock. Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design flexibility permits selection from qualified alternatives meeting the same electrical and mechanical specifications.

Substiute Parts

TNPW0805976RBEEA

Vishay DaleIn Stock: 1080TNPW0805976RBEEA Datasheet

Current PartRFQ

ERA-6AEB9760V

Panasonic Electronic ComponentsIn Stock: 7814ERA-6AEB9760V Datasheet

DirectRFQ

RT0805BRD07976RL

YAGEOIn Stock: 1138RT0805BRD07976RL Datasheet

DirectRFQ

1-2176092-7

TE Connectivity Passive ProductIn Stock: 29171-2176092-7 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TNPW0805976RBEEA is determined by the following critical parameters:

• Resistance value: 976 Ohms (exact match required)
• Tolerance: ±0.1% (exact match required)
• Package: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Temperature Coefficient: ±25ppm/°C (exact match required)
• RoHS Compliance: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: MSL 1 (exact match required)

The substitute parts identified below meet all these critical parameters. Variations in power rating, operating temperature range, and specific automotive certifications are noted in the parameter comparison table and do not preclude substitution when circuit design permits.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain ROHS3 compliance and MSL 1 rating, ensuring regulatory and environmental compatibility with the original TNPW0805976RBEEA specification.

ERA-6AEB9760V (Panasonic Electronic Components) carries AEC-Q200 automotive qualification matching the original part. This substitute is suitable for automotive applications requiring the same environmental and reliability standards as the primary component.

RT0805BRD07976RL (YAGEO) meets all critical electrical and mechanical parameters but does not specify AEC-Q200 certification. Selection of this part requires confirmation that automotive qualification is not a mandatory design requirement.

1-2176092-7 (TE Connectivity Passive Product) is manufacturer-recommended and meets all critical parameters. This part does not specify AEC-Q200 certification and carries undefined REACH status. Selection requires verification that automotive qualification and REACH compliance are not mandatory for the application.

Power rating differences (0.125W and 0.125W versus 0.26W for substitutes) require circuit analysis to confirm that actual power dissipation in the application does not exceed the substitute part rating.

Operating temperature range differences (155°C maximum for substitutes versus 175°C for the original) require confirmation that the application does not require operation above 155°C.

Frequently Asked Questions (FAQ)

Q: Can ERA-6AEB9760V replace TNPW0805976RBEEA in automotive applications?

A: Yes. ERA-6AEB9760V meets all critical substitution parameters including 976 Ohms resistance, ±0.1% tolerance, 0805 package, thin film composition, ±25ppm/°C temperature coefficient, ROHS3 compliance, and MSL 1 rating. ERA-6AEB9760V carries AEC-Q200 automotive qualification. The lower power rating (0.125W versus 0.26W) and reduced operating temperature range (-55°C to 155°C versus -55°C to 175°C) must be evaluated against circuit requirements.

Q: What is the primary difference between the substitute parts?

A: All substitute parts share identical resistance, tolerance, package, composition, and temperature coefficient specifications. Differences exist in power rating, operating temperature range, automotive certification, and physical height. ERA-6AEB9760V provides AEC-Q200 certification. RT0805BRD07976RL and 1-2176092-7 do not specify automotive qualification.

Q: Can RT0805BRD07976RL be used in place of TNPW0805976RBEEA?

A: RT0805BRD07976RL meets all critical electrical and mechanical parameters. However, it does not specify AEC-Q200 automotive certification. Use of this substitute requires confirmation that automotive qualification is not a design requirement for the application.

Q: Are there physical compatibility concerns with substitute parts?

A: All substitute parts use the 0805 (2012 Metric) package with identical length and width (0.079" L x 0.049" W). Physical height varies slightly: TNPW0805976RBEEA is 0.022" maximum, while substitutes range from 0.024" to 0.026" maximum. These height differences are within typical PCB assembly tolerances but should be confirmed for applications with height constraints.

Q: What power dissipation levels are acceptable for each substitute?

A: TNPW0805976RBEEA is rated for 0.26W. ERA-6AEB9760V and RT0805BRD07976RL are rated for 0.125W (1/8W). 1-2176092-7 is rated for 0.25W (1/4W). Circuit analysis must confirm that actual power dissipation does not exceed the substitute part rating.

Q: Do all substitute parts meet ROHS3 compliance?

A: Yes. TNPW0805976RBEEA, ERA-6AEB9760V, RT0805BRD07976RL, and 1-2176092-7 are all ROHS3 compliant.

Q: What is the operating temperature limitation for substitute parts?

A: TNPW0805976RBEEA operates from -55°C to 175°C. ERA-6AEB9760V, RT0805BRD07976RL, and 1-2176092-7 operate from -55°C to 155°C. Applications requiring operation above 155°C must use the original TNPW0805976RBEEA or confirm that the substitute temperature range is sufficient.