TNPW08053K90BEEN Equivalent & Substitute Parts

Part Overview

The TNPW08053K90BEEN is a 3.9 kOhms ±0.1% 0.26W chip resistor in 0805 (2012 Metric) package manufactured by Vishay Dale. This thin film resistor features anti-sulfur coating, automotive AEC-Q200 qualification, and moisture resistance, making it suitable for automotive and industrial applications requiring high precision and reliability. The part is currently active in production with 832 units in stock.

Substitute parts are necessary when the primary part becomes unavailable, when inventory constraints require alternative sourcing, or when design requirements allow for compatible alternatives with equivalent or enhanced electrical characteristics.

Substiute Parts

TNPW08053K90BEEN

Vishay DaleIn Stock: 908TNPW08053K90BEEN Datasheet

Current PartRFQ

TNPW08053K90BEEA

Vishay DaleIn Stock: 6100TNPW08053K90BEEA Datasheet

DirectRFQ

TNPU08053K90AZEN00

Vishay DaleIn Stock: 1683TNPU08053K90AZEN00 Datasheet

UpgradeRFQ

ERA-6AEB392V

Panasonic Electronic ComponentsIn Stock: 19191ERA-6AEB392V Datasheet

DirectRFQ

RG2012P-392-B-T5

SusumuIn Stock: 11788RG2012P-392-B-T5 Datasheet

DirectRFQ

RT0805BRD073K9L

YAGEOIn Stock: 21667RT0805BRD073K9L Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following critical parameters:

• Resistance value: 3.9 kOhms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Tolerance: ±0.1% or better (equal or tighter tolerance acceptable)
• Power rating: 0.26W or higher (equal or greater power handling acceptable)
• Composition: Thin Film (required for precision and stability)
• Automotive qualification: AEC-Q200 (required for automotive applications)
• RoHS compliance: ROHS3 Compliant (required for regulatory compliance)

All substitute parts listed meet or exceed these criteria. Substitutes are grouped into direct equivalents (identical specifications) and upgrades (enhanced electrical characteristics while maintaining compatibility).

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Preferred for Drop-In Replacement): TNPW08053K90BEEA maintains identical electrical specifications and operating parameters to the primary part. This Vishay Dale part provides the highest compatibility with existing designs and is recommended when direct substitution is required without design modification.

Upgrade Option (Enhanced Precision): TNPU08053K90AZEN00 offers tighter tolerance (±0.05% versus ±0.1%) and lower temperature coefficient (±5ppm/°C versus ±25ppm/°C), providing superior precision and stability. However, this part has reduced power rating (0.125W versus 0.26W) and narrower operating temperature range (-55°C ~ 125°C versus -55°C ~ 175°C). Selection of this upgrade requires verification that circuit power dissipation and operating temperature requirements are compatible.

Alternative Manufacturers (Equivalent Specifications): ERA-6AEB392V (Panasonic), RG2012P-392-B-T5 (Susumu), and RT0805BRD073K9L (YAGEO) provide equivalent electrical characteristics to the primary part with matching tolerance (±0.1%), temperature coefficient (±25ppm/°C), and AEC-Q200 qualification. These alternatives are suitable for applications where multi-source qualification is required or when primary manufacturer inventory is constrained. All alternatives maintain 0805 package compatibility and ROHS3 compliance.

All listed substitutes are AEC-Q200 qualified and ROHS3 compliant, meeting automotive and regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Can TNPU08053K90AZEN00 be used as a direct replacement for TNPW08053K90BEEN?

A: TNPU08053K90AZEN00 is electrically compatible in terms of resistance value and package, but has different power rating (0.125W versus 0.26W) and operating temperature range (-55°C ~ 125°C versus -55°C ~ 175°C). Use this part only if circuit power dissipation does not exceed 0.125W and operating temperature remains within -55°C to 125°C.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging is supplied on continuous tape suitable for automated pick-and-place assembly. Cut Tape packaging is supplied in smaller quantities on cut tape segments. Both formats contain identical components; packaging selection depends on production volume and assembly equipment compatibility.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes. All listed substitute parts carry AEC-Q200 automotive qualification, meeting the same reliability and quality standards as the primary part.

Q: Can I use ERA-6AEB392V if my design requires anti-sulfur coating?

A: ERA-6AEB392V does not list anti-sulfur coating in its feature set. If anti-sulfur protection is a design requirement, use TNPW08053K90BEEA, TNPU08053K90AZEN00, or RG2012P-392-B-T5, which explicitly include this feature.

Q: What is the maximum operating temperature for each substitute?

A: TNPW08053K90BEEN and TNPW08053K90BEEA support -55°C ~ 175°C. TNPU08053K90AZEN00 supports -55°C ~ 125°C. ERA-6AEB392V, RG2012P-392-B-T5, and RT0805BRD073K9L support -55°C ~ 155°C. Verify circuit operating temperature requirements before selection.