TLV2781CDBVR Equivalent & Substitute Parts

Part Overview

The TLV2781CDBVR is a general-purpose operational amplifier manufactured by Texas Instruments, housed in a SOT-23-5 surface mount package. This single-circuit, rail-to-rail output amplifier operates across a supply voltage range of 1.8 V to 3.6 V and is designed for low-power applications requiring compact form factors. The device is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity rating.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained within the specified parameter ranges. The TLV2781CDBVR operates in a constrained supply voltage window (1.8 V to 3.6 V), which limits the pool of direct substitutes to devices capable of functioning within this narrow band while maintaining comparable amplifier characteristics.

Key Parameters

Parameter	Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	1	—
Output Type	Rail-to-Rail	—
Package / Case	SC-74A, SOT-753	—
Supplier Device Package	SOT-23-5	—
Mounting Type	Surface Mount	—
Voltage - Supply Span (Min)	1.8	V
Voltage - Supply Span (Max)	3.6	V
Slew Rate	5	V/µs
Gain Bandwidth Product	8	MHz
Current - Input Bias	2.5	pA
Voltage - Input Offset	250	µV
Current - Supply	650	µA
Current - Output / Channel	23	mA
Operating Temperature	0 to 70	°C
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution eligibility for the TLV2781CDBVR is determined by strict adherence to the following electrical and mechanical criteria:

Primary Substitution Criteria:

Package compatibility: SOT-23-5 (SC-74A, SOT-753) surface mount only
Single-circuit, general-purpose amplifier topology
Rail-to-rail output configuration
Supply voltage range: minimum 1.8 V, maximum 3.6 V (or wider range encompassing this window)
Active product status
ROHS3 compliance and MSL 1 rating

Secondary Compatibility Parameters:

Slew rate: 5 V/µs or greater
Gain bandwidth product: 8 MHz or greater
Input bias current: 2.5 pA or lower
Input offset voltage: 250 µV or lower
Supply current: 650 µA or lower
Output current per channel: 23 mA or greater

Substitute parts are grouped into two categories based on supply voltage capability:

Category A: Narrow Supply Range (1.8 V to 3.6 V) Parts meeting the exact supply voltage window of the TLV2781CDBVR. These devices require no application redesign for power supply circuits.

Category B: Extended Supply Range (encompasses 1.8 V to 3.6 V) Parts with wider supply voltage specifications that include the TLV2781CDBVR operating window. These substitutes function within the original design constraints but offer additional flexibility for future applications.

Parameter Comparison

Part Number	Manufacturer	Slew Rate (V/µs)	GBW (MHz)	Input Bias (pA)	Input Offset (µV)	Supply Current (µA)	Output Current (mA)	Supply Min (V)	Supply Max (V)	Temp Range (°C)	Packaging
TLV2781CDBVR	Texas Instruments	5	8	2.5	250	650	23	1.8	3.6	0 to 70	Tape & Reel
AD8601ARTZ-R2	Analog Devices	6	8.4	0.2	80	750	50	2.7	5.5	-40 to 125	Cut Tape & Digi-Reel
AD8601ARTZ-REEL	Analog Devices	6	8.4	0.2	80	750	50	2.7	5.5	-40 to 125	Cut Tape & Digi-Reel
AD8601ARTZ-REEL7	Analog Devices	6	8.4	0.2	80	750	50	2.7	5.5	-40 to 125	Cut Tape & Digi-Reel
AD8601WARTZ-R7	Analog Devices	6	8.4	200	1300	750	50	2.7	5.5	-40 to 125	Cut Tape & Digi-Reel
AD8601WDRTZ-REEL7	Analog Devices	6	8.4	0.2	1300	750	50	2.7	5.5	-40 to 125	Cut Tape & Digi-Reel
MAX4321EUK+T	Analog Devices/Maxim	2	5	50	1200	725	—	2.4	6.5	-40 to 85	Tape & Reel
MAX4322EUK+T	Analog Devices/Maxim	2	5	50	1200	725	—	2.4	6.5	-40 to 85	Tape & Reel
MCP6281RT-E/OT	Microchip Technology	2.5	5	1	3000	450	25	2.2	6	-40 to 125	Tape & Reel
MCP6281T-E/OT	Microchip Technology	2.5	5	1	3000	450	25	2.2	6	-40 to 125	Cut Tape & Digi-Reel
MCP6481T-E/OT	Microchip Technology	2.7	4	1	1500	240	12	2.2	5.5	-40 to 125	Tape & Reel

Engineering Selection Recommendations

Substitution Feasibility Assessment:

The TLV2781CDBVR operates within a constrained 1.8 V to 3.6 V supply voltage window. All identified substitute parts exceed this minimum supply voltage requirement (minimum 2.2 V to 2.7 V), which means they cannot operate at the lower 1.8 V specification of the original device. Substitution is therefore limited to applications where the power supply can be adjusted to meet the substitute part's minimum voltage requirement.

Recommended Substitutes by Application Context:

For Extended Temperature Range Requirements: The AD8601 series (AD8601ARTZ-R2, AD8601ARTZ-REEL, AD8601ARTZ-REEL7) and MCP6281/MCP6481 series support -40°C to 125°C operation, compared to the TLV2781CDBVR's 0°C to 70°C range. These parts maintain ROHS3 compliance and MSL 1 rating. The AD8601ARTZ-REEL7 variant offers the highest inventory availability (21,300 units).

For Automotive-Grade Applications: The AD8601WARTZ-R7 and AD8601WDRTZ-REEL7 are designated automotive-grade devices with extended temperature support (-40°C to 125°C). These parts are suitable for applications requiring automotive qualification.

For Low-Power Supply Current: The MCP6481T-E/OT exhibits the lowest supply current (240 µA) among substitutes, compared to the TLV2781CDBVR's 650 µA. This part is suitable for battery-powered applications where power consumption is critical.

For Highest Output Current Capability: The AD8601 series provides 50 mA output current per channel, exceeding the TLV2781CDBVR's 23 mA specification. This is applicable when higher load-driving capability is required.

Compliance and Certification: All substitute parts listed maintain ROHS3 compliance and MSL 1 (unlimited) moisture sensitivity rating, matching the original device's environmental certifications. All parts are active production status devices.

Frequently Asked Questions (FAQ)

Q1: Can the TLV2781CDBVR be directly replaced with any of the listed substitutes without circuit modification?

A: No. The TLV2781CDBVR operates at a minimum supply voltage of 1.8 V, while all substitute parts require minimum supply voltages between 2.2 V and 2.7 V. Direct substitution requires verification that the application's power supply can be adjusted to meet the substitute part's minimum voltage specification. If the original design operates at 1.8 V, substitution is not feasible without power supply redesign.

Q2: What is the primary limiting factor for substitution compatibility?

A: Supply voltage range is the primary limiting factor. The TLV2781CDBVR's 1.8 V minimum specification is lower than all available substitutes. Secondary factors include slew rate (5 V/µs minimum), gain bandwidth product (8 MHz minimum), and input bias current (2.5 pA maximum). Substitutes meeting these secondary criteria but exceeding the minimum supply voltage are conditionally compatible.

Q3: Are there substitutes that maintain the exact 1.8 V to 3.6 V supply voltage range?

A: No. All identified substitutes have supply voltage ranges that begin at 2.2 V or higher. The TLV2781CDBVR's narrow 1.8 V to 3.6 V window is a specialized specification not matched by the substitute parts listed.

Q4: Which substitute offers the best performance improvement over the TLV2781CDBVR?

A: The AD8601 series (AD8601ARTZ-R2, AD8601ARTZ-REEL, AD8601ARTZ-REEL7) provides measurable improvements: slew rate increases from 5 V/µs to 6 V/µs, gain bandwidth product increases from 8 MHz to 8.4 MHz, input bias current decreases from 2.5 pA to 0.2 pA, and output current increases from 23 mA to 50 mA. Operating temperature range extends from 0°C to 70°C to -40°C to 125°C.

Q5: Can the TLV2781CDBVR be used in automotive applications?

A: The TLV2781CDBVR is not designated as automotive-grade. For automotive applications, the AD8601WARTZ-R7 or AD8601WDRTZ-REEL7 are appropriate substitutes, as both carry automotive-grade designation and support -40°C to 125°C operation.

Q6: What is the difference between the AD8601 variants (ARTZ-R2, ARTZ-REEL, ARTZ-REEL7)?

A: All three AD8601 variants share identical electrical specifications. The differences are in packaging configuration and inventory availability. ARTZ-R2 is supplied in Cut Tape & Digi-Reel format with 4,900 units in stock. ARTZ-REEL is also Cut Tape & Digi-Reel with 12,700 units. ARTZ-REEL7 is Cut Tape & Digi-Reel with the highest availability at 21,300 units. Selection should be based on procurement quantity and packaging preference.

Q7: How do the MCP6281 and MCP6481 differ?

A: Both are Microchip Technology general-purpose amplifiers in SOT-23-5 packages. The MCP6281 offers higher slew rate (2.5 V/µs vs. 2.7 V/µs) and higher gain bandwidth product (5 MHz vs. 4 MHz), but the MCP6481 provides significantly lower supply current (240 µA vs. 450 µA) and lower input offset voltage (1.5 mV vs. 3 mV). Selection depends on whether bandwidth or power consumption is the priority.

Q8: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed maintain ROHS3 compliance and MSL 1 (unlimited) moisture sensitivity rating, matching the TLV2781CDBVR's environmental certifications.

Q9: What is the impact of higher input offset voltage in substitutes?

A: Several substitutes exhibit higher input offset voltage than the TLV2781CDBVR (250 µV). The MAX4321EUK+T and MAX4322EUK+T have 1.2 mV offset, MCP6281 variants have 3 mV offset, and MCP6481 has 1.5 mV offset. Higher offset voltage may require additional calibration or trimming in precision analog circuits. Applications with tight DC accuracy requirements should prioritize the AD8601 series, which maintains 80 µV offset.

Q10: Which substitute is recommended for battery-powered applications?

A: The MCP6481T-E/OT is recommended for battery-powered applications due to its lowest supply current specification (240 µA), compared to the TLV2781CDBVR's 650 µA. This represents a 63% reduction in quiescent current consumption. However, verify that the application's minimum supply voltage requirement can be met, as MCP6481 requires minimum 2.2 V.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message