TL-T5E1-7-5M Equivalent & Substitute Parts

Part Overview

The TL-T5E1-7-5M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for non-contact detection applications with a 5mm sensing distance. This sensor features NPN-NO output configuration, IP67 ingress protection, and operates across a -25°C to 70°C temperature range. The product is currently classified as obsolete, making identification of functionally equivalent alternatives essential for system maintenance, repair, and component sourcing in ongoing applications.

Substiute Parts

TL-T5E1-7-5M

Omron Automation and SafetyIn Stock: 1156TL-T5E1-7-5M Datasheet

Current PartRFQ

TL-W5MC1

Omron Automation and SafetyIn Stock: 1035TL-W5MC1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TL-T5E1-7-5M is determined by strict equivalence across the following critical parameters:

• Sensor Type: Inductive (required for detection principle compatibility)
• Sensing Distance: 0.197" (5mm) (required for detection range equivalence)
• Output Type: NPN-NO, 3-Wire (required for circuit interface compatibility)
• Voltage - Supply: 10V ~ 30V (required for power supply compatibility)
• Ingress Protection: IP67 (required for environmental protection equivalence)
• Operating Temperature: -25°C ~ 70°C (required for thermal environment compatibility)
• Shielding: Unshielded (required for electromagnetic interference characteristics)
• Material - Body: Plastic (required for mechanical and chemical compatibility)
• Indicator: LED (required for operational feedback equivalence)
• Package / Case: Module (required for form factor compatibility)

The TL-W5MC1 meets all critical substitution criteria and is classified as an active product, providing a direct functional equivalent for the obsolete TL-T5E1-7-5M.

Parameter Comparison

Engineering Selection Recommendations

The TL-W5MC1 is the direct functional equivalent for the obsolete TL-T5E1-7-5M. Both sensors share identical specifications across all critical electrical and mechanical parameters required for substitution: inductive sensing principle, 5mm detection distance, NPN-NO 3-wire output, 10V–30V supply voltage, IP67 protection rating, and -25°C to 70°C operating temperature range.

The TL-W5MC1 offers the advantage of active product status, ensuring ongoing availability and support. The substitute part features a higher response frequency of 500Hz compared to the main part's 250Hz, providing improved detection speed capability. The primary difference in termination style—cable leads on the TL-W5MC1 versus cable with connector on the TL-T5E1-7-5M—requires evaluation of the specific installation requirements and connector compatibility in the target application.

The TL-W5MC1 is RoHS Compliant and REACH Affected, meeting current regulatory compliance standards for electronic components.

Frequently Asked Questions (FAQ)

Q: Can the TL-W5MC1 directly replace the TL-T5E1-7-5M in existing installations?

A: The TL-W5MC1 is functionally equivalent across all critical electrical and mechanical parameters. However, the termination style differs: the TL-T5E1-7-5M uses cable with connector, while the TL-W5MC1 uses cable leads. Installation compatibility depends on the connector interface requirements of the target application.

Q: What is the significance of the response frequency difference between these sensors?

A: The TL-T5E1-7-5M operates at 250Hz response frequency, while the TL-W5MC1 operates at 500Hz. The higher response frequency of the substitute part enables faster detection cycles and improved performance in high-speed detection applications. This difference does not affect substitution validity for applications operating within the 250Hz frequency range.

Q: Are there compliance differences between the main part and substitute?

A: The TL-T5E1-7-5M is classified as REACH Unaffected. The TL-W5MC1 is REACH Affected and RoHS Compliant. Both parts carry EAR99 ECCN classification. The substitute part meets current regulatory compliance standards for electronic components in industrial applications.

Q: What packaging options are available for these sensors?

A: The TL-T5E1-7-5M is supplied in standard packaging. The TL-W5MC1 is available in bulk packaging. Packaging selection should be based on procurement volume and inventory management requirements.

Q: Are both sensors suitable for IP67-rated applications?

A: Both the TL-T5E1-7-5M and TL-W5MC1 feature IP67 ingress protection rating, making them suitable for applications requiring protection against dust ingress and temporary immersion in water. This specification is maintained across both parts.