TLS202A1MBVHTMA1 Equivalent & Substitute Parts

Part Overview

The TLS202A1MBVHTMA1 is a linear voltage regulator IC from Infineon Technologies' OPTIREG™ series, designed for positive adjustable output applications with 150mA current capability. This device is classified as not for new designs, indicating it has been superseded in Infineon's product portfolio. For new development projects or when the original part becomes unavailable, identifying functionally equivalent alternatives is essential to maintain design continuity and ensure supply chain reliability.

Substiute Parts

TLS202A1MBVHTMA1

Infineon TechnologiesIn Stock: 1181TLS202A1MBVHTMA1 Datasheet

Current PartRFQ

TLS202A1MBVHTSA1

Infineon TechnologiesIn Stock: 1033TLS202A1MBVHTSA1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLS202A1MBVHTMA1 is determined by strict equivalence across the following critical parameters:

• Output configuration and type (Positive Adjustable)
• Voltage specifications (Input Max: 18V, Output range: 1.2V to 5.25V)
• Current capability (150mA output)
• Voltage dropout characteristics (1V @ 150mA)
• Quiescent current (75 µA)
• PSRR performance (65dB @ 10kHz)
• Protection features (Over Current, Over Temperature, Short Circuit)
• Operating temperature range (-40°C ~ 150°C)
• Automotive grade and AEC-Q100 qualification
• Package specification (6-SMD, 5 Leads, Gull Wing)
• Compliance standards (ROHS3, REACH Unaffected)

The TLS202A1MBVHTSA1 meets all these criteria as a parametric equivalent from the same manufacturer and series.

Parameter Comparison

Engineering Selection Recommendations

The TLS202A1MBVHTSA1 is the direct substitute for the TLS202A1MBVHTMA1. Both devices are manufactured by Infineon Technologies and belong to the OPTIREG™ series with identical electrical and mechanical specifications. The primary distinction is product status: the original part is designated as not for new designs, while the substitute is active in Infineon's current product line.

For new designs and ongoing production, the TLS202A1MBVHTSA1 is the appropriate selection. Both parts maintain automotive-grade qualification (AEC-Q100) and full compliance with ROHS3 and REACH requirements, ensuring regulatory and supply chain continuity. The identical package specification (PG-SCT595-5-1) and pin configuration enable direct board-level substitution without design modification.

Frequently Asked Questions (FAQ)

Q: Can the TLS202A1MBVHTSA1 be used as a direct replacement for the TLS202A1MBVHTMA1?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters, including voltage ratings, current capability, protection features, operating temperature range, and package configuration. Direct substitution is supported without circuit design changes.

Q: What is the difference between these two part numbers?

A: The TLS202A1MBVHTMA1 is marked as not for new designs, indicating it has been superseded. The TLS202A1MBVHTSA1 is the active equivalent with identical specifications. The difference lies in product lifecycle status, not electrical or mechanical performance.

Q: Are both parts automotive-qualified?

A: Yes. Both the TLS202A1MBVHTMA1 and TLS202A1MBVHTSA1 carry automotive-grade classification and AEC-Q100 qualification, meeting automotive industry reliability and quality standards.

Q: Is the package the same for both parts?

A: Yes. Both parts use the PG-SCT595-5-1 package specification: 6-SMD (5 Leads) with Gull Wing configuration. PCB footprints and assembly processes are identical.

Q: Do both parts meet current compliance requirements?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory standards for electronic components.