TLE2024BMDW Equivalent & Substitute Parts

Part Overview

The TLE2024BMDW is a general-purpose operational amplifier integrated circuit manufactured by Texas Instruments, featuring four independent amplifier circuits in a 16-SOIC surface mount package. This device is classified as obsolete, which necessitates identification of active equivalent parts for ongoing design support and procurement continuity. The TLE2024BMDW belongs to the Excalibur™ series and is suitable for applications requiring low-noise, general-purpose amplification across industrial and commercial temperature ranges.

Substiute Parts

TLE2024BMDW

Texas InstrumentsIn Stock: 1120TLE2024BMDW Datasheet

Current PartRFQ

TLE2024BMDWR

Texas InstrumentsIn Stock: 3906TLE2024BMDWR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TLE2024BMDW is determined by strict equivalence across all electrical and mechanical parameters. The primary substitution criterion is the maintenance of identical specifications across the following key parameters:

• Number of circuits: 4 independent amplifier channels
• Slew rate: 0.7 V/µs
• Gain bandwidth product: 2.8 MHz
• Input bias current: 35 nA
• Input offset voltage: 500 µV
• Supply current per channel: 1.05 mA (total across 4 channels)
• Output current per channel: 40 mA
• Supply voltage range: 4 V to 40 V
• Operating temperature range: -55°C to 125°C
• Package type: 16-SOIC surface mount
• Compliance certifications: ROHS3, REACH Unaffected

The TLE2024BMDWR is identified as a direct substitute based on identical electrical performance and mechanical compatibility. The distinction between these parts is limited to packaging format and product status.

Parameter Comparison

Engineering Selection Recommendations

The TLE2024BMDWR is the direct equivalent substitute for the obsolete TLE2024BMDW. Both parts are manufactured by Texas Instruments and share identical electrical specifications and mechanical compatibility. The TLE2024BMDWR maintains active product status, ensuring long-term availability and manufacturing support.

Selection of the TLE2024BMDWR is appropriate for new designs and production continuity. Both parts satisfy ROHS3 compliance and REACH regulatory requirements. The primary distinction between these parts is packaging format: the TLE2024BMDW is supplied in tube packaging, while the TLE2024BMDWR is supplied in Tape & Reel format. Packaging selection depends on production volume and assembly line requirements.

No electrical or thermal performance differences exist between these parts. Pin configuration, footprint, and functional behavior are identical. Direct substitution on printed circuit boards is supported without design modification.

Frequently Asked Questions (FAQ)

Q: Can the TLE2024BMDWR be used as a direct replacement for the TLE2024BMDW in existing designs?

A: Yes. The TLE2024BMDWR is electrically and mechanically identical to the TLE2024BMDW. All electrical parameters, operating temperature range, supply voltage specifications, and 16-SOIC package dimensions are equivalent. Direct substitution on existing printed circuit boards is supported without design changes.

Q: What is the difference between TLE2024BMDW and TLE2024BMDWR?

A: The primary difference is packaging format. The TLE2024BMDW is supplied in tube packaging, while the TLE2024BMDWR is supplied in Tape & Reel (TR) format. The TLE2024BMDWR also maintains active product status, whereas the TLE2024BMDW is classified as obsolete. All electrical and mechanical specifications are identical.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both the TLE2024BMDW and TLE2024BMDWR are ROHS3 compliant and REACH unaffected. Moisture sensitivity level is identical at MSL 1 (Unlimited). Both parts satisfy the same regulatory and environmental standards.

Q: Which part should be selected for new production?

A: The TLE2024BMDWR should be selected for new production and ongoing designs. This part maintains active product status and ensures continued manufacturing support and availability. The TLE2024BMDW is obsolete and should not be specified for new designs.

Q: Is the 16-SOIC package footprint identical between these parts?

A: Yes. Both parts use the 16-SOIC package with identical dimensions of 0.295 inches (7.50 mm) width. PCB footprints and land patterns are interchangeable.

Q: What is the supply voltage range for these amplifiers?

A: Both parts operate across a supply voltage range of 4 V to 40 V. This wide supply range supports diverse application requirements in industrial and commercial environments.

Q: What is the operating temperature range?

A: Both the TLE2024BMDW and TLE2024BMDWR operate across a temperature range of -55°C to 125°C, suitable for industrial and extended-temperature applications.