TLC7701QPWREP Equivalent & Substitute Parts

Part Overview

The TLC7701QPWREP is a Power Management Integrated Circuit (PMIC) functioning as a supervisor with push-pull, totem pole output configuration. This device monitors a single voltage channel and provides active high/active low reset functionality with a minimum reset timeout of 1.1ms. The part is currently in active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same package and functional specifications.

Substiute Parts

TLC7701QPWREP

Texas InstrumentsIn Stock: 1229TLC7701QPWREP Datasheet

Current PartRFQ

TLC7701QPWR

Texas InstrumentsIn Stock: 1145TLC7701QPWR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TLC7701QPWREP are identified based on strict equivalence across the following critical parameters:

• Manufacturer: Texas Instruments
• Functional Type: Simple Reset/Power-On Reset Supervisor
• Number of Monitored Channels: 1
• Voltage Threshold: 1.1V
• Output Configuration: Push-Pull, Totem Pole
• Reset Logic: Active High/Active Low
• Reset Timeout: 1.1ms Minimum
• Operating Temperature Range: -40°C to 125°C
• Package: 8-TSSOP with identical physical dimensions
• Compliance: ROHS3 Compliant, REACH Unaffected

The TLC7701QPWR meets all substitution criteria as a direct parametric equivalent, differing only in packaging format (Tape & Reel designation) while maintaining identical electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the TLC7701QPWREP and TLC7701QPWR are active product status components from Texas Instruments with identical electrical and mechanical specifications. Selection between these parts is determined by packaging and inventory requirements rather than functional differences. Both parts maintain full ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for industrial and commercial applications. The choice between these equivalents should be based on supply chain availability, packaging format preference (Tape & Reel designation), and project inventory management protocols.

Frequently Asked Questions (FAQ)

Q: Can TLC7701QPWR be used as a direct replacement for TLC7701QPWREP?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, voltage thresholds, output configurations, and package dimensions. The difference lies in packaging format designation only.

Q: Are there any differences in the 8-TSSOP package between these parts?

A: No. Both parts use the identical 8-TSSOP package with 0.173" width and 4.40mm dimensions. Physical PCB layout and footprint requirements are identical.

Q: What is the significance of the voltage threshold of 1.1V?

A: The 1.1V threshold defines the voltage level at which the supervisor monitors the power supply and triggers reset functionality. This parameter must remain constant for functional equivalence in reset/power-on reset applications.

Q: Do both parts support the same reset logic configurations?

A: Yes. Both TLC7701QPWREP and TLC7701QPWR support active high/active low reset logic with identical 1.1ms minimum reset timeout specifications.

Q: Are there compliance or certification differences between these parts?

A: No. Both parts maintain identical ROHS3 compliance, REACH unaffected status, and moisture sensitivity level 1 (unlimited) ratings.

Q: What operating temperature range is supported?

A: Both parts operate across the industrial temperature range of -40°C to 125°C (TA), suitable for standard industrial and commercial applications.