TAP156M010CLZ Equivalent & Substitute Parts

Part Overview

The TAP156M010CLZ is a 15 µF conformal coated tantalum capacitor rated at 10 V with radial through-hole mounting. Manufactured by KYOCERA AVX, this component is classified as Active product status and is designed for general-purpose applications requiring reliable energy storage in compact form factors. Finding equivalent or substitute parts becomes necessary when addressing design upgrades, voltage margin improvements, tolerance refinement, or inventory optimization while maintaining functional compatibility within the circuit application.

Substiute Parts

TAP156M010CLZ

KYOCERA AVXIn Stock: 1237TAP156M010CLZ Datasheet

Current PartRFQ

TAP156K016CCS

KYOCERA AVXIn Stock: 2591TAP156K016CCS Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

The TAP156K016CCS qualifies as a direct substitute for the TAP156M010CLZ based on the following alignment of critical electrical and mechanical parameters:

Matching Parameters:

• Capacitance: 15 µF (identical)
• Mounting Type: Through Hole (identical)
• Package / Case: Radial (identical)
• Type: Conformal Coated (identical)
• Operating Temperature Range: -55°C ~ 125°C (identical)
• RoHS Status: ROHS3 Compliant (identical)
• Series: TAP (identical manufacturer series)

Upgraded Parameters:

• Voltage - Rated: 16 V (versus 10 V in main part) — provides higher voltage margin
• Tolerance: ±10% (versus ±20% in main part) — provides tighter capacitance tolerance
• ESR: 2.5 Ohm (versus 3.7 Ohm in main part) — provides lower equivalent series resistance

The substitute part maintains identical functional capacity while offering improved electrical performance characteristics suitable for applications requiring enhanced voltage headroom or stricter tolerance specifications.

Parameter Comparison

Engineering Selection Recommendations

Both TAP156M010CLZ and TAP156K016CCS maintain Active product status from KYOCERA AVX and are ROHS3 Compliant, ensuring continued availability and regulatory compliance for new designs and production runs. The TAP156K016CCS represents an upgrade path offering improved electrical performance through higher voltage rating (16 V versus 10 V) and tighter tolerance specification (±10% versus ±20%), while maintaining identical lead spacing and maximum seated height for direct PCB compatibility. Selection between these parts depends on circuit voltage requirements and tolerance specifications; the substitute part is suitable for applications where the original 10 V rating provides insufficient margin or where ±10% tolerance is required instead of ±20%.

Frequently Asked Questions (FAQ)

Q: Can TAP156K016CCS directly replace TAP156M010CLZ on existing PCBs?

A: Yes. Both parts share identical lead spacing (0.197" / 5.00mm), maximum seated height (0.413" / 10.50mm), and radial through-hole mounting configuration. The substitute part diameter increases from 0.197" to 0.217", which does not affect PCB hole compatibility.

Q: What are the key differences between these two parts?

A: The substitute part (TAP156K016CCS) provides three upgrades: rated voltage increases from 10 V to 16 V, tolerance tightens from ±20% to ±10%, and ESR decreases from 3.7 Ohm to 2.5 Ohm. Capacitance value, operating temperature range, and mounting type remain identical.

Q: Is the higher voltage rating of TAP156K016CCS always beneficial?

A: Higher voltage rating provides increased safety margin in circuits operating near the original 10 V specification. However, component selection should match actual circuit requirements; oversizing voltage ratings unnecessarily may impact cost or space efficiency.

Q: Are both parts RoHS compliant?

A: Yes. Both TAP156M010CLZ and TAP156K016CCS are ROHS3 Compliant, meeting regulatory requirements for restricted substances in electrical and electronic equipment.

Q: What does the ±10% tolerance improvement mean for circuit performance?

A: Tighter tolerance (±10% versus ±20%) reduces capacitance variation across the production batch, improving circuit predictability and performance consistency in applications sensitive to capacitance drift.