TAJS335K006RNJ Equivalent & Substitute Parts

Part Overview

The TAJS335K006RNJ is a 3.3 µF molded tantalum capacitor manufactured by KYOCERA AVX, rated for 6.3 V operation in a 1206 (3216 Metric) surface mount package. This component is designed for general purpose applications requiring stable capacitance performance across the operating temperature range of -55°C to 125°C. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity.

Substiute Parts

TAJS335K006RNJ

KYOCERA AVXIn Stock: 1000TAJS335K006RNJ Datasheet

Current PartRFQ

TAJA335K006RNJ

KYOCERA AVXIn Stock: 4836TAJA335K006RNJ Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TAJS335K006RNJ is determined by strict equivalence across the following critical parameters:

• Capacitance value: 3.3 µF
• Tolerance: ±10%
• Rated voltage: 6.3 V
• Package type: 1206 (3216 Metric)
• Mounting configuration: Surface Mount
• Operating temperature range: -55°C ~ 125°C
• Compliance certifications: RoHS3, REACH Unaffected

The TAJA335K006RNJ meets all substitution criteria. Both parts are manufactured by KYOCERA AVX within the TAJ series, share identical electrical ratings, and maintain equivalent environmental compliance. Variations in ESR (Equivalent Series Resistance) and physical height do not preclude substitution when electrical performance requirements are met within the specified tolerance and voltage parameters.

Parameter Comparison

Engineering Selection Recommendations

Both TAJS335K006RNJ and TAJA335K006RNJ are Active products with identical electrical specifications and full regulatory compliance. Selection between these parts should be based on application-specific requirements:

The TAJA335K006RNJ offers lower ESR (7 Ohm @ 100kHz versus 9 Ohm), which may provide performance advantages in applications sensitive to impedance characteristics. The TAJA variant exhibits greater seated height (1.80mm versus 1.20mm), requiring verification of available PCB clearance in space-constrained designs.

Both parts maintain RoHS3 compliance and REACH Unaffected status, supporting use in regulated manufacturing environments. Moisture sensitivity rating of MSL 1 (Unlimited) eliminates moisture-related handling restrictions for both variants.

Frequently Asked Questions (FAQ)

Q: Can TAJA335K006RNJ be used as a direct replacement for TAJS335K006RNJ?

A: Yes. Both parts share identical capacitance (3.3 µF), tolerance (±10%), voltage rating (6.3 V), package type (1206), and operating temperature range (-55°C ~ 125°C). Physical height difference (1.80mm versus 1.20mm) must be verified against PCB layout constraints.

Q: What is the significance of the ESR difference between these parts?

A: ESR (Equivalent Series Resistance) affects impedance behavior at specific frequencies. The TAJA335K006RNJ exhibits 7 Ohm @ 100kHz compared to 9 Ohm for the TAJS335K006RNJ. This difference is relevant only in applications where frequency-dependent impedance is a design parameter.

Q: Are both parts suitable for high-temperature applications?

A: Yes. Both parts operate across -55°C to 125°C, supporting extended temperature range requirements. Operating temperature capability is identical between the two variants.

Q: Do these parts require special handling or storage conditions?

A: No. Both parts carry MSL 1 (Unlimited) moisture sensitivity rating, eliminating moisture-related handling, storage, or baking requirements.

Q: Are regulatory certifications equivalent between these parts?

A: Yes. Both TAJS335K006RNJ and TAJA335K006RNJ maintain ROHS3 compliance and REACH Unaffected status, supporting identical regulatory requirements.

Q: What packaging format is available for these parts?

A: Both parts are supplied in Tape & Reel (TR) format for automated assembly processes.