TA-6.000MBD-T Equivalent & Substitute Parts

Part Overview

The TA-6.000MBD-T is a 6 MHz MEMS-based XO (Standard) oscillator manufactured by TXC CORPORATION. This component operates at 3.3V with CMOS output, Enable/Disable functionality, and is housed in a 4-SMD, No Lead package. The part is currently listed as Obsolete, making identification of compatible substitute components essential for ongoing production and maintenance applications.

Substiute Parts

TA-6.000MBD-T

TXC CORPORATIONIn Stock: 1313TA-6.000MBD-T Datasheet

Current PartRFQ

510CBA6M00000AAGR

Skyworks Solutions Inc.In Stock: 1224510CBA6M00000AAGR Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TA-6.000MBD-T is determined by strict equivalence across the following critical parameters:

Frequency Match: Both the main part and substitute must operate at 6.0000 MHz with identical frequency stability of ±25ppm.

Electrical Compatibility: Supply voltage must be 3.3V with CMOS output configuration and Enable/Disable functionality to ensure direct circuit compatibility.

Package Equivalence: The 4-SMD, No Lead package with dimensions of 7.00mm x 5.00mm is mandatory for PCB layout compatibility.

Operating Environment: Temperature range of -40°C ~ 85°C and MSL 1 rating must be maintained.

Supply Current: Maximum supply current specifications must not exceed the design limits of the target application.

The substitute part 510CBA6M00000AAGR from Skyworks Solutions Inc. meets all these criteria, with the distinction that it uses a Crystal-based resonator rather than MEMS technology, while maintaining functional and electrical equivalence.

Parameter Comparison

Engineering Selection Recommendations

The 510CBA6M00000AAGR from Skyworks Solutions Inc. is the direct functional equivalent for the obsolete TA-6.000MBD-T. Selection of this substitute is based on the following engineering criteria:

Functional Equivalence: All critical electrical parameters—frequency, output type, supply voltage, function, frequency stability, and operating temperature range—are identical between the two parts.

Package Compatibility: Both components use the identical 4-SMD, No Lead package with 7.00mm x 5.00mm dimensions, ensuring direct PCB layout compatibility without redesign.

Active Product Status: The Skyworks part is currently in Active production status, ensuring long-term availability and supply chain reliability, whereas the TXC part is Obsolete.

Current Specifications: The substitute part draws a maximum of 26mA compared to 25mA for the original, representing a 1mA increase that is negligible for most applications and does not constitute a functional limitation.

Regulatory Compliance: Both parts carry identical ECCN (EAR99) and HTSUS (8542.39.0001) classifications, maintaining compliance requirements.

Resonator Technology Difference: The substitute uses Crystal-based resonator technology instead of MEMS. This difference does not affect electrical performance or compatibility, as all output specifications remain identical.

Frequently Asked Questions (FAQ)

Q: Can the 510CBA6M00000AAGR be used as a direct replacement for the TA-6.000MBD-T without PCB modifications?

A: Yes. Both parts share identical package dimensions (7.00mm x 5.00mm), pinout configuration (4-SMD, No Lead), and electrical specifications. No PCB layout changes are required for substitution.

Q: What is the difference between MEMS and Crystal resonator technology in this application?

A: The TA-6.000MBD-T uses MEMS (Micro-Electro-Mechanical Systems) resonator technology, while the 510CBA6M00000AAGR uses Crystal resonator technology. Both deliver identical frequency stability (±25ppm), output characteristics, and operating performance. The technology difference does not affect functional compatibility.

Q: Are there any current consumption differences between these parts?

A: The TA-6.000MBD-T specifies a maximum supply current of 25mA, while the 510CBA6M00000AAGR specifies 26mA. This 1mA difference is within typical application tolerances and does not constitute a functional limitation for most designs.

Q: Why is the TA-6.000MBD-T listed as Obsolete?

A: The TA-6.000MBD-T is no longer in active production by TXC CORPORATION. The 510CBA6M00000AAGR from Skyworks Solutions Inc. is the recommended substitute for new designs and ongoing production requirements.

Q: Do both parts have the same moisture sensitivity rating?

A: Yes. Both the TA-6.000MBD-T and 510CBA6M00000AAGR carry MSL 1 (Unlimited) moisture sensitivity level, indicating no moisture-related handling restrictions.

Q: What is the packaging difference between the main part and substitute?

A: The TA-6.000MBD-T is supplied in Cut Tape (CT) packaging, while the 510CBA6M00000AAGR is supplied in Tape & Reel (TR) packaging. Both are surface mount formats; the difference reflects standard packaging options for production volumes and does not affect component performance.

Q: Are the regulatory classifications identical?

A: Yes. Both parts carry the same ECCN (EAR99) and HTSUS (8542.39.0001) classifications, ensuring equivalent regulatory compliance for export and trade purposes.