T1M-03-GF-DV-L Equivalent & Substitute Parts

Part Overview

The T1M-03-GF-DV-L is a surface mount rectangular connector header manufactured by Samtec Inc. as part of the Micro Mate™ T1M series. This connector is a 6-position, 2-row header with 1.00mm pitch designed for board-to-cable/wire applications. The part is currently active in production with 1023 units in stock. Substitute parts are identified when packaging configurations or inventory availability require alternative part numbers while maintaining identical electrical and mechanical specifications.

Substiute Parts

T1M-03-GF-DV-L

Samtec Inc.In Stock: 1099T1M-03-GF-DV-L Datasheet

Current PartRFQ

T1M-03-GF-DV

Samtec Inc.In Stock: 1382T1M-03-GF-DV Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The T1M-03-GF-DV-L has one identified substitute part: T1M-03-GF-DV. Substitution between these parts is valid based on the following criteria:

Identical Electrical Parameters:

• Contact type, pitch, and row spacing
• Current rating (3.3A per Contact)
• Voltage rating (250VAC, 353VDC)
• Operating temperature range (-55°C ~ 85°C)
• Contact material and finish specifications

Identical Mechanical Parameters:

• Number of positions (6) and rows (2)
• Mounting type (Surface Mount)
• Shrouding configuration (Shrouded - 4 Wall)
• Insulation material (Liquid Crystal Polymer)
• Insulation height (0.268" / 6.80mm)

Compliance & Certification:

• RoHS3 Compliant
• UL94 V-0 flammability rating
• Moisture Sensitivity Level 1

Difference: The substitute part T1M-03-GF-DV differs only in packaging configuration (Bulk vs. standard packaging for T1M-03-GF-DV-L).

Parameter Comparison

Engineering Selection Recommendations

Both T1M-03-GF-DV-L and T1M-03-GF-DV are active production parts from Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and inventory availability.

T1M-03-GF-DV-L is available with 1023 units in stock, while T1M-03-GF-DV is available with 1313 units in bulk packaging. Both parts meet ROHS3 compliance and UL94 V-0 flammability requirements, making them suitable for equivalent applications in board-to-cable/wire connector applications requiring 6-position, 1.00mm pitch headers.

Frequently Asked Questions (FAQ)

Q: Can T1M-03-GF-DV be used as a direct replacement for T1M-03-GF-DV-L?

A: Yes. Both parts share identical electrical and mechanical specifications, including pitch, row spacing, contact configuration, current rating, voltage rating, and operating temperature range. The only difference is packaging configuration.

Q: What is the difference between T1M-03-GF-DV-L and T1M-03-GF-DV?

A: The primary difference is packaging. T1M-03-GF-DV-L uses standard packaging, while T1M-03-GF-DV is supplied in bulk packaging. All functional and electrical characteristics are identical.

Q: Are both parts RoHS compliant?

A: Yes. Both T1M-03-GF-DV-L and T1M-03-GF-DV are ROHS3 compliant and meet UL94 V-0 flammability requirements.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts have a Moisture Sensitivity Level (MSL) of 1, indicating unlimited shelf life without special moisture control requirements.

Q: What is the maximum current rating per contact?

A: Both parts are rated for 3.3A per contact at the specified voltage ratings of 250VAC and 353VDC.

Q: What is the operating temperature range?

A: Both parts operate reliably across the temperature range of -55°C to 85°C.