STP70NF03L Equivalent & Substitute Parts

Part Overview

The STP70NF03L is an N-Channel MOSFET manufactured by STMicroelectronics, rated for 30V drain-to-source voltage and 70A continuous drain current in a Through Hole TO-220 package. This device is part of the STripFET™ II series and is classified as Obsolete. Due to its obsolete status, equivalent and substitute parts from active manufacturers are necessary for new designs and ongoing production requirements.

Key Parameters

Parameter	Value
Drain to Source Voltage (Vdss)	30 V
Continuous Drain Current (Id) @ 25°C	70 A
Rds On (Max) @ 10V, 35A	9.5 mOhm
Gate Charge (Qg) @ 5V	30 nC
Power Dissipation (Max)	100 W
Operating Temperature Range	-55°C to 175°C
Package Type	TO-220-3
Mounting Type	Through Hole

Substitute Part Grouping Explanation

Substitution of the STP70NF03L is determined by the following critical parameters:

Electrical Compatibility Requirements:

Drain-to-Source Voltage (Vdss) must be equal to or greater than 30V
Continuous Drain Current (Id) must be equal to or greater than 70A at 25°C
Gate-Source Voltage (Vgs) maximum must accommodate ±18V operation
Operating temperature range must span -55°C to 175°C
On-state resistance (Rds On) characteristics must support the application's thermal and efficiency requirements

Mechanical Compatibility Requirements:

Package type must be TO-220-3 (Through Hole)
Mounting configuration must be Through Hole

Compliance Requirements:

RoHS3 compliance required
Moisture Sensitivity Level (MSL) of 1 (Unlimited) required

The substitute parts listed below meet these criteria with electrical ratings equal to or exceeding the STP70NF03L specifications, ensuring functional compatibility in existing circuit designs.

Parameter Comparison

Parameter	STP70NF03L	IRL3803PBF	IRF1404ZPBF	PSMN2R0-30PL,127	PSMN4R3-30PL,127
Manufacturer	STMicroelectronics	Infineon Technologies	Infineon Technologies	Nexperia USA Inc.	Nexperia USA Inc.
Vdss (V)	30	30	40	30	30
Id @ 25°C (A)	70	140	180	100	100
Rds On (Max) @ 10V (mOhm)	9.5	6	3.7	2.1	4.3
Gate Charge @ Vgs (nC)	30 @ 5V	140 @ 4.5V	150 @ 10V	117 @ 10V	41.5 @ 10V
Power Dissipation (Max) (W)	100	200	200	211	103
Operating Temperature (°C)	-55 to 175	-55 to 175	-55 to 175	-55 to 175	-55 to 175
Package	TO-220-3	TO-220-3	TO-220-3	TO-220-3	TO-220-3
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Product Status	Obsolete	Not For New Designs	Active	Obsolete	Obsolete
RoHS3 Compliance	Yes	Yes	Yes	Yes	Yes

Engineering Selection Recommendations

For Active Production and New Designs:

IRF1404ZPBF is the primary recommended substitute. This device is manufactured by Infineon Technologies with Active product status, ensuring long-term availability and supply chain stability. The IRF1404ZPBF exceeds STP70NF03L specifications across all critical parameters: 40V Vdss (versus 30V), 180A continuous drain current (versus 70A), and superior on-state resistance of 3.7 mOhm at 10V. The higher power dissipation rating of 200W provides additional thermal margin. Full RoHS3 compliance and MSL 1 rating are maintained.

For Legacy System Maintenance:

IRL3803PBF serves as an alternative substitute with Not For New Designs status. This Infineon HEXFET® device provides 140A continuous drain current and 6 mOhm on-state resistance, both superior to the original STP70NF03L. The 30V Vdss rating matches the original specification exactly. This option is suitable for replacement in existing systems where supply continuity is required.

Secondary Options:

PSMN2R0-30PL,127 and PSMN4R3-30PL,127 are Nexperia devices with Obsolete status. Both provide 100A continuous drain current and 30V Vdss matching the original specification. PSMN2R0-30PL,127 offers superior on-state resistance of 2.1 mOhm, while PSMN4R3-30PL,127 provides lower gate charge of 41.5 nC. These options are suitable for applications where the original STP70NF03L inventory is depleted and immediate substitution is required, though long-term availability may be limited due to obsolete status.

Frequently Asked Questions (FAQ)

Q: Can the IRF1404ZPBF directly replace the STP70NF03L without circuit modifications?

A: Yes. The IRF1404ZPBF is pin-compatible in the TO-220-3 package and exceeds all electrical specifications of the STP70NF03L. The higher voltage rating (40V versus 30V) and current rating (180A versus 70A) provide additional design margin. No circuit modifications are required for functional substitution.

Q: What is the primary advantage of selecting IRF1404ZPBF over other substitutes?

A: IRF1404ZPBF has Active product status, ensuring guaranteed long-term availability and supply chain support from Infineon Technologies. All other listed substitutes are either Obsolete or Not For New Designs, which may result in future supply constraints.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts (IRL3803PBF, IRF1404ZPBF, PSMN2R0-30PL,127, and PSMN4R3-30PL,127) are RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching the original STP70NF03L specifications.

Q: How do on-state resistance differences affect circuit performance?

A: On-state resistance (Rds On) directly impacts power dissipation and thermal performance. The STP70NF03L has 9.5 mOhm at 10V and 35A. All substitute parts provide equal or lower Rds On values: IRL3803PBF (6 mOhm), IRF1404ZPBF (3.7 mOhm), PSMN2R0-30PL,127 (2.1 mOhm), and PSMN4R3-30PL,127 (4.3 mOhm). Lower resistance reduces power dissipation and improves efficiency.

Q: Is the TO-220-3 package identical across all substitute parts?

A: Yes. All substitute parts use the TO-220-3 Through Hole package with identical pin configuration and mechanical dimensions, ensuring direct PCB compatibility without layout modifications.

Q: What is the significance of gate charge differences among substitutes?

A: Gate charge (Qg) affects switching speed and gate drive circuit requirements. The STP70NF03L has 30 nC at 5V. Substitute parts range from 41.5 nC (PSMN4R3-30PL,127) to 150 nC (IRF1404ZPBF). Higher gate charge requires more drive current but does not prevent substitution in standard gate drive circuits.

Q: Can PSMN2R0-30PL,127 or PSMN4R3-30PL,127 be used in new designs?

A: Both Nexperia parts are classified as Obsolete. While electrically suitable for substitution, their obsolete status indicates limited future availability. For new designs, IRF1404ZPBF with Active status is the recommended choice.

Q: What operating temperature range is supported by all substitute parts?

A: All substitute parts support the full operating temperature range of -55°C to 175°C (TJ), matching the STP70NF03L specification and ensuring thermal compatibility across all environmental conditions.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message