SSW-106-22-F-D Equivalent & Substitute Parts

Part Overview

The SSW-106-22-F-D is a 12-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This connector features through-hole solder termination, gold-plated mating contacts, and forked contact geometry. The product is active and widely used in applications requiring reliable rectangular connector solutions with push-pull fastening. Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when inventory requirements necessitate alternative stock sources.

Substiute Parts

SSW-106-22-F-D

Samtec Inc.In Stock: 813SSW-106-22-F-D Datasheet

Current PartRFQ

SSW-106-02-F-D

Samtec Inc.In Stock: 2400SSW-106-02-F-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The SSW-106-02-F-D qualifies as a direct substitute for the SSW-106-22-F-D based on identical electrical and mechanical parameters. Both parts share the same base product number (SSW-106) and are functionally equivalent across all critical substitution criteria:

• 12-position receptacle configuration with identical pitch spacing (0.100")
• Identical row count and row spacing (2 rows at 0.100")
• Matching contact specifications: forked geometry, gold mating finish, 4.7A current rating
• Identical mounting and termination methods: through-hole solder
• Equivalent environmental ratings: -55°C ~ 125°C operating range, UL94 V-0 flammability
• Matching material composition: Liquid Crystal Polymer insulation with phosphor bronze contacts
• Identical compliance status: ROHS3 compliant

Parameter Comparison

Engineering Selection Recommendations

Both the SSW-106-22-F-D and SSW-106-02-F-D are active products from Samtec Inc. with identical electrical, mechanical, and environmental specifications. Selection between these part numbers should be based on inventory availability and supply chain requirements. Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification, meeting equivalent regulatory standards. The SSW-106-02-F-D currently maintains higher inventory levels (2377 pcs vs. 785 pcs), which may provide supply chain advantages for high-volume applications. No performance or compatibility differences exist between these alternatives.

Frequently Asked Questions (FAQ)

Q: Are SSW-106-22-F-D and SSW-106-02-F-D mechanically interchangeable?

A: Yes. Both connectors feature identical mechanical dimensions, pitch spacing (0.100"), row configuration (2 rows), and through-hole mounting footprints. They are direct mechanical substitutes.

Q: Do these connectors have identical electrical ratings?

A: Yes. Both parts carry identical current ratings (4.7A per contact), operating temperature range (-55°C ~ 125°C), and contact finish specifications (gold mating surface at 3.00µin thickness).

Q: Are there compliance differences between these part numbers?

A: No. Both parts are ROHS3 compliant and carry UL94 V-0 flammability certification. They meet identical regulatory requirements.

Q: Can I use SSW-106-02-F-D as a direct replacement in existing designs using SSW-106-22-F-D?

A: Yes. The parts are functionally equivalent across all specified parameters. No design modifications are required for substitution.

Q: What is the difference between these two part numbers?

A: The part numbers differ only in their suffix designation (22-F-D vs. 02-F-D). All electrical, mechanical, and environmental specifications are identical. The difference reflects internal Samtec product line organization and does not affect performance or compatibility.