SSW-105-01-S-P Equivalent & Substitute Parts

Part Overview

The SSW-105-01-S-P is a 5-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This through-hole connector features gold-plated mating contacts and tin-plated posts, rated for 4.7A per contact with an operating temperature range of -55°C to 125°C. The part is currently active in production with ROHS3 compliance and UL94 V-0 flammability rating. Substitute parts are identified when equivalent electrical and mechanical specifications are maintained across the connector series.

Substiute Parts

SSW-105-01-S-P

Samtec Inc.In Stock: 1231SSW-105-01-S-P Datasheet

Current PartRFQ

SSW-105-01-S-S

Samtec Inc.In Stock: 1081SSW-105-01-S-S Datasheet

SimilarRFQ

SSW-105-01-SM-S

Samtec Inc.In Stock: 953SSW-105-01-SM-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSW-105-01-S-P are identified based on strict equivalence of the following parameters:

• Connector Type & Series: Receptacle connectors within the SSW series
• Position Count: 5-position configuration
• Pitch Specification: 0.100" (2.54mm) mating pitch
• Mounting Method: Through-hole termination
• Contact Finish: Gold-plated mating surface with 30.0µin thickness
• Current Rating: 4.7A per contact minimum
• Operating Temperature Range: -55°C to 125°C
• Compliance: ROHS3 compliant, UL94 V-0 rated

The identified substitutes maintain identical electrical and mechanical specifications across these critical parameters, ensuring direct interchangeability in circuit designs.

Parameter Comparison

Engineering Selection Recommendations

All three parts—SSW-105-01-S-P, SSW-105-01-S-S, and SSW-105-01-SM-S—are active production components from Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on:

• Availability: Current inventory levels vary (SSW-105-01-S-P: 1159 pcs, SSW-105-01-S-S: 1028 pcs, SSW-105-01-SM-S: 917 pcs)
• Compliance Requirements: All parts meet ROHS3 compliance and UL94 V-0 flammability standards
• Supply Chain Considerations: Multiple part numbers within the same series provide redundancy for procurement planning

Direct substitution is permissible across all three part numbers without design modification or performance degradation.

Frequently Asked Questions (FAQ)

Q: Can SSW-105-01-S-S be used as a direct replacement for SSW-105-01-S-P?

A: Yes. Both parts are 5-position receptacle connectors with identical pitch (0.100"), contact finish (gold, 30.0µin), current rating (4.7A per contact), and operating temperature range (-55°C to 125°C). No circuit design changes are required.

Q: What is the difference between SSW-105-01-SM-S and SSW-105-01-S-P?

A: The parts are electrically and mechanically equivalent. Differences exist only in internal part designation codes. All critical parameters—position count, pitch, contact finish, current rating, and temperature range—are identical.

Q: Are all three parts ROHS3 compliant?

A: Yes. SSW-105-01-S-P, SSW-105-01-S-S, and SSW-105-01-SM-S are all ROHS3 compliant with UL94 V-0 flammability rating.

Q: Can these connectors be used interchangeably in the same PCB design?

A: Yes. All three parts share identical through-hole mounting specifications, insulation height (0.335"), and contact post length (0.104"), ensuring mechanical compatibility on the same printed circuit board layout.

Q: What determines substitutability for SSW series 5-position connectors?

A: Substitutability is determined by matching connector type (receptacle), position count (5), mating pitch (0.100"), contact finish (gold with 30.0µin thickness), current rating (4.7A per contact), and operating temperature range (-55°C to 125°C).