SSQ-150-24-G-D Equivalent & Substitute Parts

Part Overview

The SSQ-150-24-G-D is a 100 position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This connector features gold-plated forked contacts, through-hole solder termination, and push-pull fastening. The part is active in production with 980 units currently in stock. Alternative models may be required due to inventory constraints, application-specific packaging needs, or supply chain considerations.

Substiute Parts

SSQ-150-24-G-D

Samtec Inc.In Stock: 1070SSQ-150-24-G-D Datasheet

Current PartRFQ

SSQ-150-04-G-D

Samtec Inc.In Stock: 770SSQ-150-04-G-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The SSQ-150-04-G-D qualifies as a direct substitute for the SSQ-150-24-G-D based on the following critical parameters:

Matching Parameters:

• Same manufacturer (Samtec Inc.)
• Same series (SSQ)
• Identical connector type (Receptacle)
• Identical number of positions (100)
• Identical pitch spacing (0.100" / 2.54mm)
• Identical number of rows (2)
• Identical mounting type (Through Hole)
• Identical termination method (Solder)
• Identical contact finish (Gold)
• Identical operating temperature range (-55°C ~ 125°C)
• Identical voltage rating (465VAC, 655VDC)
• Identical product status (Active)
• Identical RoHS compliance (ROHS3 Compliant)

The substitution is valid because all electrical and mechanical parameters that determine connector compatibility remain unchanged between the two part numbers.

Parameter Comparison

Engineering Selection Recommendations

Both the SSQ-150-24-G-D and SSQ-150-04-G-D are active production parts with full ROHS3 compliance. Selection between these parts should be based on inventory availability and lead time requirements. The SSQ-150-24-G-D has higher current stock levels (980 units) compared to the SSQ-150-04-G-D (689 units). Both parts meet identical electrical specifications, mechanical requirements, and environmental operating conditions. No functional differences exist between these part numbers for standard rectangular connector applications.

Frequently Asked Questions (FAQ)

Q: Can SSQ-150-04-G-D be used as a direct replacement for SSQ-150-24-G-D?

A: Yes. Both parts are identical in all critical electrical and mechanical parameters including connector type, position count, pitch spacing, mounting method, contact finish, operating temperature, and voltage rating.

Q: Are there any compatibility issues when substituting between these part numbers?

A: No. The parts share the same series designation, contact configuration, and termination specifications. PCB layouts and mating connector requirements remain unchanged.

Q: What is the difference between SSQ-150-24-G-D and SSQ-150-04-G-D?

A: The provided specifications indicate no functional or electrical differences between these part numbers. The variation in the part number suffix does not reflect changes to the core connector specifications.

Q: Are both parts RoHS compliant?

A: Yes. Both SSQ-150-24-G-D and SSQ-150-04-G-D are ROHS3 compliant.

Q: Which part should be selected based on availability?

A: Selection should be based on current inventory levels and project timeline. SSQ-150-24-G-D has 980 units in stock, while SSQ-150-04-G-D has 689 units available.