SSQ-112-23-G-S Equivalent & Substitute Parts

Part Overview

The SSQ-112-23-G-S is a 12-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features gold-plated forked contacts, solder termination, and push-pull fastening. The part is currently active in production with 689 units in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are maintained across the same connector series, enabling component interchangeability for procurement flexibility and supply chain optimization.

Substiute Parts

SSQ-112-23-G-S

Samtec Inc.In Stock: 726SSQ-112-23-G-S Datasheet

Current PartRFQ

SSQ-112-03-G-S

Samtec Inc.In Stock: 1721SSQ-112-03-G-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSQ-112-23-G-S is determined by strict equivalence across the following critical parameters:

• Connector series (SSQ)
• Number of positions (12)
• Pitch specification (0.100" / 2.54mm)
• Connector type (Receptacle)
• Contact finish (Gold)
• Mounting method (Through Hole)
• Voltage and temperature ratings (465VAC, 655VDC; -55°C ~ 125°C)
• Compliance certifications (ROHS3, UL94 V-0)

The identified substitute part SSQ-112-03-G-S maintains complete electrical and mechanical equivalence across all specified parameters, confirming direct interchangeability within the SSQ series.

Parameter Comparison

Engineering Selection Recommendations

Both SSQ-112-23-G-S and SSQ-112-03-G-S are active production parts with ROHS3 compliance and UL94 V-0 flammability certification. Selection between these parts should be based on inventory availability and procurement lead times. The SSQ-112-03-G-S currently maintains higher stock levels (1670 units) compared to SSQ-112-23-G-S (689 units), making it the preferred choice for applications requiring immediate availability. Both parts are functionally equivalent and suitable for direct substitution in board-to-board and cable connector applications operating within the specified voltage and temperature ranges.

Frequently Asked Questions (FAQ)

Q: Can SSQ-112-03-G-S be used as a direct replacement for SSQ-112-23-G-S?

A: Yes. Both parts are identical across all electrical and mechanical specifications, including connector type, position count, pitch, contact finish, voltage rating, and operating temperature range. Direct substitution is supported.

Q: What are the key compatibility factors for this connector series?

A: Compatibility is determined by matching the connector series (SSQ), number of positions (12), mating pitch (0.100"), contact finish (gold), and mounting method (through-hole). All these parameters are equivalent between the main part and substitute.

Q: Are there any compliance differences between these parts?

A: No. Both parts carry identical certifications: ROHS3 compliance and UL94 V-0 flammability rating. Both are active production parts with no restrictions on use.

Q: What is the difference between SSQ-112-23-G-S and SSQ-112-03-G-S?

A: The parts differ only in their specific part number designations within the SSQ-112 base product family. All functional, electrical, and mechanical characteristics are identical. The designation difference reflects internal Samtec product line organization but does not affect interchangeability.

Q: Can these connectors be used in high-temperature applications?

A: Yes. Both parts are rated for operating temperatures from -55°C to 125°C, supporting applications across industrial and commercial temperature ranges.

Q: What voltage levels are supported?

A: Both connectors are rated for 465VAC and 655VDC, suitable for standard industrial and commercial power distribution applications.