SSM-119-S-DH Equivalent & Substitute Parts

Part Overview

The SSM-119-S-DH is a 38-position receptacle connector manufactured by Samtec Inc., part of the Tiger Claw™ SSM series. This surface mount, right-angle connector features 0.100" (2.54mm) pitch spacing and gold-plated mating contacts rated for 5.2A per contact at 405VAC/572VDC. The part is currently active in production with 1152 units in stock. Identifying equivalent and substitute parts is necessary when addressing supply chain constraints, design revisions, or when the primary part becomes unavailable.

Substiute Parts

SSM-119-S-DH

Samtec Inc.In Stock: 1166SSM-119-S-DH Datasheet

Current PartRFQ

SSM-119-S-DH

Samtec Inc.In Stock: 735SSM-119-S-DH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the SSM-119-S-DH is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle)
• Contact type (Female Socket)
• Number of positions (38)
• Pitch spacing (0.100" / 2.54mm)
• Number of rows (2)
• Row spacing (0.100" / 2.54mm)
• Mounting configuration (Surface Mount, Right Angle)
• Contact finish (Gold at 30.0µin / 0.76µm)
• Current rating (5.2A per contact)
• Voltage rating (405VAC, 572VDC)
• Operating temperature range (-55°C ~ 125°C)
• Insulation material (Liquid Crystal Polymer)
• Termination method (Solder)
• Fastening type (Push-Pull)

The substitute part identified maintains full electrical and mechanical compatibility with the main part across all specified parameters.

Parameter Comparison

Engineering Selection Recommendations

The substitute part SSM-119-S-DH is electrically and mechanically identical to the main part. Both are manufactured by Samtec Inc. and carry ROHS3 compliance certification. The primary distinction is product status: the main part is currently active in production with 1152 units in stock, while the substitute is discontinued at DiGi Electronics with 712 units available. Selection between these parts should be based on inventory availability and supply chain requirements. Both parts meet all regulatory and compliance standards specified for rectangular connector applications in this category.

Frequently Asked Questions (FAQ)

Q: Are these parts fully interchangeable? A: Yes. Both parts are identical across all electrical and mechanical parameters, including connector type, position count, pitch spacing, mounting configuration, contact finish, current and voltage ratings, and operating temperature range.

Q: What is the difference between the main part and the substitute? A: The parts are electrically and mechanically equivalent. The primary difference is product status: SSM-119-S-DH (main) is active in production, while SSM-119-S-DH (substitute) is discontinued at DiGi Electronics. Inventory levels also differ.

Q: Can I use the substitute part in existing designs? A: Yes. The substitute part maintains full compatibility with designs specified for the main part. No design modifications are required.

Q: Are both parts RoHS compliant? A: Yes. Both parts are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic components.

Q: What is the moisture sensitivity level for these connectors? A: Both parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Are there any differences in packaging or availability? A: The main part is supplied in tube packaging with 1152 units in stock. The substitute part shows discontinued status at DiGi Electronics with 712 units available. Packaging specifications for the substitute are not provided in the available data.