SSM-110-S-DV-BE-TR Equivalent & Substitute Parts

Part Overview

The SSM-110-S-DV-BE-TR is a 20-position receptacle connector from Samtec Inc.'s Tiger Claw™ SSM series, designed for surface mount applications with bottom entry configuration. This connector features gold-plated mating contacts, 0.100" (2.54mm) pitch, and supports 5.2A per contact at operating temperatures from -55°C to 125°C. The part is actively produced and ROHS3 compliant. Identifying equivalent substitute parts ensures design flexibility, supply chain continuity, and procurement optimization when the primary part number becomes unavailable or when alternative packaging formats better suit manufacturing requirements.

Substiute Parts

SSM-110-S-DV-BE-TR

Samtec Inc.In Stock: 1216SSM-110-S-DV-BE-TR Datasheet

Current PartRFQ

SSM-110-S-DV-BE-K-TR

Samtec Inc.In Stock: 1229SSM-110-S-DV-BE-K-TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The SSM-110-S-DV-BE-K-TR qualifies as a direct substitute for the SSM-110-S-DV-BE-TR based on identical electrical and mechanical specifications. Both parts share the same base product number (SSM-110), connector configuration, contact arrangement, and performance ratings. The substitution is valid across the following critical parameters:

• Connector type, position count, and pitch specifications
• Mating contact finish (gold) and thickness (30.0µin)
• Current and voltage ratings
• Operating temperature range
• Insulation material and dimensions
• RoHS3 compliance and MSL rating

The primary difference between these parts is packaging format: SSM-110-S-DV-BE-TR is supplied in Tape & Reel (TR) format, while SSM-110-S-DV-BE-K-TR is supplied in Cut Tape (CT) format. This distinction affects procurement and assembly processes but does not alter component functionality or electrical performance.

Parameter Comparison

Engineering Selection Recommendations

Both SSM-110-S-DV-BE-TR and SSM-110-S-DV-BE-K-TR are active products from Samtec Inc. with identical ROHS3 compliance and regulatory certifications (ECCN: EAR99, HTSUS: 8536.69.4040). Selection between these parts should be based on packaging and assembly requirements rather than electrical or mechanical performance criteria.

The Tape & Reel (TR) format of SSM-110-S-DV-BE-TR is optimized for high-volume automated assembly operations using pick-and-place equipment. The Cut Tape (CT) format of SSM-110-S-DV-BE-K-TR provides flexibility for lower-volume production runs, manual assembly, or mixed-component kitting scenarios. Both formats contain identical connector components with no functional differentiation.

Frequently Asked Questions (FAQ)

Q: Are SSM-110-S-DV-BE-TR and SSM-110-S-DV-BE-K-TR electrically identical?

A: Yes. Both parts have identical electrical specifications including current rating (5.2A per contact), voltage rating (405VAC, 572VDC), contact finish (gold, 30.0µin thickness), and operating temperature range (-55°C to 125°C). The only difference is packaging format.

Q: What is the difference between Tape & Reel (TR) and Cut Tape (CT) packaging?

A: Tape & Reel packaging supplies components on a continuous reel suitable for automated pick-and-place assembly. Cut Tape packaging supplies components in individual tape segments, typically used for lower-volume production, manual assembly, or component kitting. The connector itself is identical in both formats.

Q: Can I use SSM-110-S-DV-BE-K-TR as a direct replacement for SSM-110-S-DV-BE-TR in my design?

A: Yes, from an electrical and mechanical standpoint. However, packaging format may affect your assembly process. Verify that your manufacturing equipment and procurement workflow can accommodate Cut Tape format if switching from Tape & Reel.

Q: Do both parts meet the same compliance standards?

A: Yes. Both SSM-110-S-DV-BE-TR and SSM-110-S-DV-BE-K-TR are ROHS3 compliant with MSL rating of 1 (Unlimited), identical ECCN and HTSUS classifications, and the same regulatory certifications.

Q: What is the pitch specification for these connectors?

A: Both connectors feature 0.100" (2.54mm) mating pitch with 0.100" (2.54mm) row spacing. This is a standard pitch for board-to-board and cable interconnect applications.

Q: Are there any performance differences between these substitute parts?

A: No. Both parts are from the same Tiger Claw™ SSM series with identical contact materials (phosphor bronze), contact finish specifications, insulation material (LCP), and mechanical dimensions. Performance is equivalent across all electrical and thermal parameters.