SSHB21HS-30013 Equivalent & Substitute Parts

Part Overview

The SSHB21HS-30013 is a 2-line common mode choke (CMC) manufactured by KEMET, designed for through-hole mounting applications. This component features 1.3 mH inductance at 10 kHz with a 3A maximum current rating and 60 mOhm DC resistance. The part is classified as Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to inventory constraints, design optimization, or application-specific requirements within the allowed parameter ranges.

Substiute Parts

SSHB21HS-30013

KEMETIn Stock: 1119SSHB21HS-30013 Datasheet

Current PartRFQ

SSHB10HS-30006

KEMETIn Stock: 1455SSHB10HS-30006 Datasheet

Parametric EquivalentRFQ

SSHB10HS-R30015

KEMETIn Stock: 1002SSHB10HS-R30015 Datasheet

Parametric EquivalentRFQ

SSR10VS-30013

KEMETIn Stock: 1603SSR10VS-30013 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSHB21HS-30013 are qualified based on the following criteria:

Critical Parameters for Substitution:

• Number of Lines: 2 (all substitutes maintain this requirement)
• Current Rating (Max): 3A (all substitutes maintain this specification)
• DC Resistance (DCR) (Max): 60 mOhm (all substitutes maintain this specification)
• Voltage Rating - AC: 250V (all substitutes maintain this specification)
• Operating Temperature: -25°C ~ 120°C (all substitutes maintain this range)
• Mounting Type: Through Hole (all substitutes maintain this requirement)
• Package / Case: Vertical, 4 PC Pin (all substitutes maintain this configuration)
• RoHS Status: ROHS3 Compliant (all substitutes maintain compliance)

Variable Parameters Allowing Substitution:

• Inductance @ Frequency: Substitutes range from 600 µH to 1.5 mH @ 10 kHz
• Physical Dimensions: Substitutes vary in length, width, and height within through-hole form factor constraints
• Series: Substitutes may belong to different KEMET series (SSHB10HS, SSR)

All substitute parts maintain electrical performance within the allowed parameter envelope for 2-line common mode choke applications with identical current handling, impedance characteristics, and environmental ratings.

Parameter Comparison

Engineering Selection Recommendations

Selection of substitute parts for the SSHB21HS-30013 is based on the following engineering criteria:

SSR10VS-30013: This substitute provides identical inductance (1.3 mH @ 10 kHz) and maintains all critical electrical parameters. The part is Active status and ROHS3 compliant. Physical dimensions differ, with reduced width (13.00 mm vs. 23.00 mm) and increased height (21.00 mm vs. 15.50 mm), requiring PCB layout verification for space constraints.

SSHB10HS-R30015: This substitute provides higher inductance (1.5 mH @ 10 kHz) while maintaining all critical electrical parameters. The part is Active status and ROHS3 compliant. Physical dimensions are reduced (22.00 mm length, 17.00 mm width, 15.50 mm height), offering improved board space efficiency. The inductance increase of 0.2 mH may affect circuit filtering characteristics.

SSHB10HS-30006: This substitute provides lower inductance (600 µH @ 10 kHz) while maintaining all critical electrical parameters. The part is Active status and ROHS3 compliant. Physical dimensions are reduced (22.00 mm length, 17.00 mm width, 15.50 mm height). The inductance reduction of 0.7 mH represents a significant change in filtering performance and requires circuit analysis.

All substitute parts maintain Active product status, ROHS3 compliance, and identical current handling and thermal specifications as the primary part.

Frequently Asked Questions (FAQ)

Q: Can SSHB10HS-30006 replace SSHB21HS-30013 in all applications?

A: SSHB10HS-30006 maintains identical current rating (3A), DC resistance (60 mOhm), voltage rating (250V AC), operating temperature range (-25°C ~ 120°C), mounting type (through hole), and package configuration (vertical, 4 PC pin). However, inductance is reduced to 600 µH @ 10 kHz compared to 1.3 mH @ 10 kHz. This 54% reduction in inductance affects common mode filtering performance and requires circuit analysis to confirm compatibility.

Q: What are the physical space differences between substitute parts?

A: SSHB21HS-30013 measures 26.00 mm L × 23.00 mm W × 15.50 mm H. SSHB10HS-30006 and SSHB10HS-R30015 both measure 22.00 mm L × 17.00 mm W × 15.50 mm H, offering reduced footprint. SSR10VS-30013 measures 23.50 mm L × 13.00 mm W × 21.00 mm H, with reduced width but increased height. PCB layout verification is required when substituting due to dimensional changes.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. SSHB10HS-30006, SSHB10HS-R30015, and SSR10VS-30013 are all ROHS3 compliant, matching the compliance status of SSHB21HS-30013.

Q: What is the inductance difference between SSHB10HS-R30015 and the primary part?

A: SSHB10HS-R30015 provides 1.5 mH @ 10 kHz compared to 1.3 mH @ 10 kHz for SSHB21HS-30013. This represents a 15% increase in inductance, which may improve common mode filtering performance but requires circuit validation.

Q: Do all substitute parts support the same current rating?

A: Yes. All substitute parts maintain a maximum current rating of 3A with 60 mOhm DC resistance, identical to SSHB21HS-30013.

Q: Can SSR10VS-30013 be used as a direct replacement?

A: SSR10VS-30013 maintains identical inductance (1.3 mH @ 10 kHz), current rating (3A), DC resistance (60 mOhm), and all electrical specifications. However, physical dimensions differ significantly: 23.50 mm L × 13.00 mm W × 21.00 mm H versus 26.00 mm L × 23.00 mm W × 15.50 mm H. PCB layout compatibility must be verified before substitution.