SMB10J22A-M3/52 Equivalent & Substitute Parts

Part Overview

The SMB10J22A-M3/52 is a unidirectional transient voltage suppressor (TVS) diode manufactured by Vishay General Semiconductor - Diodes Division. This surface mount component operates in the DO-214AA (SMB) package and provides transient overvoltage protection for general-purpose applications. The part is active and in production, with RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to supply constraints, design flexibility, or application-specific requirements.

Key Parameters

Parameter	Value	Unit
Voltage - Reverse Standoff (Typ)	22	V
Voltage - Breakdown (Min)	24.4	V
Voltage - Clamping (Max) @ Ipp	35.5	V
Current - Peak Pulse (10/1000µs)	28.2	A
Power - Peak Pulse	1000	W
Operating Temperature Range	-55 to 150	°C (TJ)
Package / Case	DO-214AA, SMB	—
Mounting Type	Surface Mount	—
Type	Zener	—
Unidirectional Channels	1	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution eligibility for the SMB10J22A-M3/52 is determined by the following critical parameters:

Primary Substitution Criteria:

Voltage - Reverse Standoff (Typ): 22V
Voltage - Clamping (Max) @ Ipp: 35.5V
Unidirectional Channels: 1
Package / Case: DO-214AA, SMB
Mounting Type: Surface Mount
Type: Zener

Secondary Compatibility Factors:

Current - Peak Pulse (10/1000µs): 28.2A (reference value; lower values acceptable for reduced transient energy applications)
Power - Peak Pulse: 1000W (reference value; lower values acceptable for reduced power dissipation applications)
Operating Temperature Range: -55°C to 150°C (minimum requirement)
RoHS3 Compliance and MSL 1 rating

Substitute parts maintain the same voltage protection characteristics (22V standoff, 35.5V clamping) and identical package form factor. Variations in peak pulse current and power dissipation are acceptable when application transient energy requirements are lower than the main part specification.

Parameter Comparison

Parameter	SMB10J22A-M3/52 (Vishay)	SMBJ20A (Good-Ark)	SMBJ22A (Meritek)	SMBJ22A-TP (Micro Commercial Co)	SMBJ24A (MDD)	SZ1SMB22AT3G (onsemi)
Voltage - Reverse Standoff (Typ)	22V	20V	22V	22V	24V	22V
Voltage - Breakdown (Min)	24.4V	22.2V	24.4V	24.4V	26.7V	24.4V
Voltage - Clamping (Max) @ Ipp	35.5V	32.4V	35.5V	35.5V	38.9V	35.5V
Current - Peak Pulse (10/1000µs)	28.2A	18.5A	16.9A	16.9A	15.5A	16.9A
Power - Peak Pulse	1000W	600W	600W	600W	600W	600W
Operating Temperature Range	-55 to 150°C	-55 to 150°C	-55 to 150°C	-55 to 175°C	-50 to 150°C	-65 to 150°C
Package / Case	DO-214AA, SMB	DO-214AA, SMB	DO-214AA, SMB	DO-214AA, SMB	DO-214AA, SMB	DO-214AA, SMB
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Type	Zener	Zener	Zener	Zener	Zener	Zener
Unidirectional Channels	1	1	1	1	1	1
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Direct Equivalents (Identical Voltage Protection): SMBJ22A (Meritek), SMBJ22A-TP (Micro Commercial Co), and SZ1SMB22AT3G (onsemi) provide identical voltage protection characteristics with 22V reverse standoff and 35.5V clamping voltage. These parts are suitable for direct substitution when the application transient energy requirement does not exceed 600W peak pulse power. SZ1SMB22AT3G includes AEC-Q101 automotive qualification and extended temperature range (-65 to 150°C), making it appropriate for automotive and extended-temperature applications.

Lower Voltage Alternative: SMBJ20A (Good-Ark) operates at 20V reverse standoff with 32.4V clamping voltage. This part is suitable only for applications where lower voltage protection is acceptable and transient energy does not exceed 600W peak pulse power.

Higher Voltage Alternative: SMBJ24A (MDD) operates at 24V reverse standoff with 38.9V clamping voltage. This part is suitable only for applications where higher voltage protection is required and transient energy does not exceed 600W peak pulse power.

All substitute parts maintain RoHS3 compliance, MSL 1 rating, and surface mount DO-214AA (SMB) package compatibility. Selection should be based on specific application voltage protection requirements and available transient energy levels.

Frequently Asked Questions (FAQ)

Q: Can SMBJ22A (Meritek) directly replace SMB10J22A-M3/52? A: Yes. Both parts share identical voltage protection parameters (22V standoff, 35.5V clamping) and the same DO-214AA (SMB) package. The primary difference is reduced peak pulse current (16.9A vs. 28.2A) and power dissipation (600W vs. 1000W). Direct substitution is valid when application transient energy does not exceed 600W.

Q: What is the difference between SMBJ22A-TP and SMBJ22A? A: SMBJ22A-TP is supplied in Tape & Reel (TR) packaging by Micro Commercial Co, while SMBJ22A from Meritek has unspecified packaging. Both provide identical electrical performance. Selection depends on packaging and supply chain requirements.

Q: Is SZ1SMB22AT3G suitable for automotive applications? A: Yes. SZ1SMB22AT3G carries AEC-Q101 automotive qualification and operates across an extended temperature range (-65 to 150°C). It provides identical voltage protection to the main part and is appropriate for automotive transient voltage suppression.

Q: Can SMBJ20A be used instead of SMB10J22A-M3/52? A: SMBJ20A operates at lower voltage protection (20V standoff vs. 22V). Substitution is valid only if the application circuit can tolerate lower voltage protection thresholds. Electrical compatibility must be verified against specific circuit requirements.

Q: Can SMBJ24A be used instead of SMB10J22A-M3/52? A: SMBJ24A operates at higher voltage protection (24V standoff vs. 22V). Substitution is valid only if the application circuit requires higher voltage protection. Electrical compatibility must be verified against specific circuit requirements.

Q: Are all substitute parts RoHS3 compliant? A: Yes. All listed substitute parts are RoHS3 compliant with MSL 1 (unlimited) moisture sensitivity rating, matching the environmental compliance profile of the main part.

Q: What is the significance of the DO-214AA (SMB) package? A: The DO-214AA (SMB) package is a standardized surface mount package for transient voltage suppressor diodes. All listed parts use this identical package, ensuring mechanical and electrical compatibility on printed circuit boards without layout modifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message