SFML-107-01-S-D-LC Equivalent & Substitute Parts

Part Overview

The SFML-107-01-S-D-LC is a 14-position receptacle connector from Samtec Inc.'s Tiger Eye™ SFML series, designed for board-to-board or cable applications. This through-hole mounted connector features 0.050" (1.27mm) pitch mating contacts with gold plating and is rated for 3.2A per contact at 250VAC. The connector maintains an active product status with full inventory availability. Alternative part numbers within the same series may be required due to specific application requirements, manufacturing lead times, or regional availability constraints.

Substiute Parts

SFML-107-01-S-D-LC

Samtec Inc.In Stock: 1042SFML-107-01-S-D-LC Datasheet

Current PartRFQ

SFML-107-T1-S-D-LC

Samtec Inc.In Stock: 4028SFML-107-T1-S-D-LC Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The SFML-107-T1-S-D-LC qualifies as a direct substitute for the SFML-107-01-S-D-LC based on the following critical parameters:

• Identical connector type, position count, and mating pitch (0.050")
• Matching row configuration and row spacing (2 rows at 0.050")
• Identical mounting method (through hole) and termination (solder)
• Equivalent electrical ratings (3.2A per contact, 250VAC)
• Matching operating temperature range (-55°C ~ 125°C)
• Identical material flammability rating (UL94 V-0)
• Same contact finish specification (gold mating surface)
• Equivalent insulation material (Liquid Crystal Polymer)
• Both parts maintain active product status and ROHS3 compliance

The substitution is based strictly on functional and electrical equivalence within the Tiger Eye™ SFML series.

Parameter Comparison

Engineering Selection Recommendations

Both the SFML-107-01-S-D-LC and SFML-107-T1-S-D-LC maintain active product status with full ROHS3 compliance and UL94 V-0 material certification. Selection between these parts should be based on inventory availability and lead time requirements. The SFML-107-T1-S-D-LC offers higher stock levels (3978 units versus 1014 units), which may provide supply chain advantages for high-volume applications. Both connectors are functionally equivalent for all specified electrical, mechanical, and environmental parameters.

Frequently Asked Questions (FAQ)

Q: Are SFML-107-01-S-D-LC and SFML-107-T1-S-D-LC mechanically interchangeable?

A: Yes. Both connectors share identical mounting specifications (through hole), pitch (0.050"), row configuration (2 rows), and physical dimensions including insulation height (0.180") and contact length (0.120").

Q: Can these connectors be used interchangeably in PCB designs?

A: Yes. The connectors are footprint-compatible due to matching pitch, row spacing, and mounting type. No PCB redesign is required for substitution.

Q: What are the electrical differences between these parts?

A: There are no electrical differences. Both parts are rated for 3.2A per contact at 250VAC and operate across the same temperature range (-55°C ~ 125°C).

Q: Are there compliance differences between the two part numbers?

A: No. Both parts are ROHS3 compliant, UL94 V-0 rated, and classified under the same ECCN (EAR99) and HTSUS codes.

Q: Which part should be selected for new designs?

A: Selection should be based on supply chain considerations. The SFML-107-T1-S-D-LC has higher inventory availability. Both parts are active and suitable for new applications.

Q: Do these connectors require different soldering procedures?

A: No. Both connectors use identical solder termination methods and contact finish specifications (tin post finish).