SDM2A20CSP-7 Equivalent & Substitute Parts

Part Overview

The SDM2A20CSP-7 is an active Schottky diode rectifier manufactured by Diodes Incorporated, rated for 20 V DC reverse voltage and 2 A average rectified current. This component is designed for surface mount applications in fast recovery rectification circuits where low forward voltage drop and rapid switching characteristics are required. The part is RoHS3 compliant and carries unlimited moisture sensitivity level (MSL 1), indicating robust handling characteristics for standard manufacturing environments.

Substitute parts are identified when equivalent electrical performance can be achieved within the specified parameter ranges while maintaining compatibility with the original application requirements and compliance certifications.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	20	V
Current - Average Rectified (Io)	2	A
Voltage - Forward (Vf) (Max) @ If	530 mV @ 2 A	mV
Speed - Fast Recovery	≤ 500 ns, > 200 mA (Io)	ns
Current - Reverse Leakage @ Vr	80	µA @ 20 V
Capacitance @ Vr, F	70	pF @ 5V, 1MHz
Operating Temperature - Junction	-55 to 150	°C
Mounting Type	Surface Mount	—
Package / Case	2-XDFN	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitute parts for the SDM2A20CSP-7 are qualified based on the following electrical and mechanical criteria:

Voltage Rating Compatibility: The substitute part must maintain the same maximum DC reverse voltage rating of 20 V to ensure equivalent blocking capability.

Technology Class: Both the main part and substitute must utilize Schottky diode technology to preserve the characteristic low forward voltage drop and fast recovery switching behavior.

Fast Recovery Specification: The substitute must meet the fast recovery requirement of ≤ 500 ns at forward currents > 200 mA (Io) to maintain switching performance in the target application.

Surface Mount Configuration: The substitute must be configured for surface mount assembly to ensure compatibility with automated manufacturing processes.

Compliance Certifications: The substitute must maintain RoHS3 compliance and REACH unaffected status to satisfy regulatory requirements.

Current Rating Consideration: While the SDM2A20CSP-7 is rated for 2 A average rectified current, substitute parts with lower current ratings (such as 1 A) may be used in applications where the actual circuit current demand does not exceed the substitute's rating. This determination is application-specific and must be verified against actual circuit requirements.

Parameter Comparison

Parameter	SDM2A20CSP-7 (Main)	VSKY10201406-G4-08 (Substitute)	Unit
Manufacturer	Diodes Incorporated	Vishay General Semiconductor - Diodes Division	—
Technology	Schottky	Schottky	—
Voltage - DC Reverse (Vr) (Max)	20	20	V
Current - Average Rectified (Io)	2	1	A
Voltage - Forward (Vf) (Max) @ If	530 mV @ 2 A	450 mV @ 1 A	mV
Speed - Fast Recovery	≤ 500 ns, > 200 mA (Io)	≤ 500 ns, > 200 mA (Io)	ns
Current - Reverse Leakage @ Vr	80	100	µA @ 20 V
Capacitance @ Vr, F	70 @ 5V, 1MHz	240 @ 0V, 1MHz	pF
Operating Temperature - Junction (Max)	150	150	°C
Mounting Type	Surface Mount	Surface Mount	—
Package / Case	2-XDFN	0502 (1406 Metric)	—
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	—
Product Status	Active	Active	—

Engineering Selection Recommendations

Compliance and Regulatory Status: Both the SDM2A20CSP-7 and VSKY10201406-G4-08 are active products with RoHS3 compliance and REACH unaffected status, satisfying current regulatory requirements for electronic component procurement.

Electrical Performance Alignment: Both parts share identical voltage ratings (20 V DC reverse) and fast recovery specifications (≤ 500 ns), ensuring equivalent blocking and switching performance in the target circuit topology.

Current Rating Derating: The VSKY10201406-G4-08 substitute carries a 1 A average rectified current rating compared to the 2 A rating of the main part. Selection of this substitute is appropriate only when the actual circuit current demand does not exceed 1 A. Circuit analysis must confirm that peak and average forward currents remain within the substitute's specification.

Forward Voltage Characteristics: The substitute exhibits a lower forward voltage drop (450 mV @ 1 A) compared to the main part (530 mV @ 2 A). This difference reflects the lower current rating and does not indicate superior performance; direct comparison requires evaluation at equivalent current levels.

Reverse Leakage and Capacitance: The substitute demonstrates slightly higher reverse leakage (100 µA vs. 80 µA @ 20 V) and higher junction capacitance (240 pF vs. 70 pF @ measurement conditions). These parameters must be evaluated against specific application requirements for low-leakage or high-frequency switching circuits.

Package Compatibility: The main part uses 2-XDFN packaging while the substitute uses 0502 (1406 Metric) packaging. Physical footprint differences require PCB layout verification before substitution.

Frequently Asked Questions (FAQ)

Q: Can the VSKY10201406-G4-08 be used as a direct replacement for the SDM2A20CSP-7?

A: Direct replacement is possible only when circuit current requirements do not exceed 1 A. Both parts share the same 20 V voltage rating and fast recovery characteristics. However, package footprints differ (2-XDFN vs. 0502 1406 Metric), requiring PCB layout modification.

Q: What is the significance of the current rating difference between these parts?

A: The SDM2A20CSP-7 is rated for 2 A average rectified current, while the VSKY10201406-G4-08 is rated for 1 A. The substitute can only be used in applications where the actual circuit current remains at or below 1 A. Exceeding this rating will result in component failure or degraded performance.

Q: Are both parts suitable for high-frequency switching applications?

A: Yes. Both parts meet the fast recovery specification of ≤ 500 ns at forward currents > 200 mA (Io), making them suitable for fast switching rectification circuits. The identical recovery time specification ensures equivalent switching performance.

Q: How do the reverse leakage specifications compare?

A: The SDM2A20CSP-7 specifies 80 µA reverse leakage at 20 V, while the VSKY10201406-G4-08 specifies 100 µA at the same voltage. The substitute exhibits 20 µA higher leakage. Applications requiring minimal reverse leakage should account for this difference.

Q: What are the package considerations for substitution?

A: The main part uses 2-XDFN packaging while the substitute uses 0502 (1406 Metric) packaging. These are different physical footprints. PCB layout and assembly equipment compatibility must be verified before implementing the substitute.

Q: Do both parts meet current regulatory compliance requirements?

A: Yes. Both the SDM2A20CSP-7 and VSKY10201406-G4-08 are RoHS3 compliant and REACH unaffected, satisfying current regulatory requirements for electronic component procurement in regulated markets.

Q: What is the operating temperature range for each part?

A: The SDM2A20CSP-7 operates from -55°C to 150°C junction temperature. The VSKY10201406-G4-08 specifies a maximum junction temperature of 150°C. Both parts support equivalent high-temperature operation.

Q: How do the forward voltage characteristics compare?

A: The SDM2A20CSP-7 specifies 530 mV forward voltage at 2 A, while the VSKY10201406-G4-08 specifies 450 mV at 1 A. These measurements are taken at different current levels and cannot be directly compared. Forward voltage performance depends on the actual operating current in the circuit.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message