SDL-113-T-12 Equivalent & Substitute Parts

Part Overview

The SDL-113-T-12 is a 26-position receptacle connector manufactured by Samtec Inc., designed for board-to-board applications with 0.100" (2.54mm) pitch spacing. This through-hole connector features gold-plated mating contacts and is classified as an active product with full inventory availability. Substitute parts are identified based on matching electrical and mechanical specifications within the SDL series rectangular connector category.

Substiute Parts

SDL-113-T-12

Samtec Inc.In Stock: 998SDL-113-T-12 Datasheet

Current PartRFQ

SDL-113-G-12

Samtec Inc.In Stock: 860SDL-113-G-12 Datasheet

SimilarRFQ

SDL-113-G-12

Samtec Inc.In Stock: 860SDL-113-G-12 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SDL-113-T-12 are identified within the SDL series based on matching the following critical parameters:

• Connector type: Receptacle
• Contact type: Female Socket
• Number of positions: 26
• Number of rows: 2
• Pitch - mating: 0.100" (2.54mm)
• Row spacing - mating: 0.100" (2.54mm)
• Mounting type: Through Hole
• Termination: Solder
• Fastening type: Push-Pull
• Insulation material: Liquid Crystal Polymer (LCP)
• Contact material: Beryllium Copper
• Operating temperature range: -55°C ~ 125°C
• RoHS and REACH compliance status

Variations in contact finish specifications on the post (mating contact finish and thickness) do not preclude substitution when all primary electrical and mechanical parameters remain identical.

Parameter Comparison

Engineering Selection Recommendations

Both SDL-113-T-12 and SDL-113-G-12 are active products from Samtec Inc. with full ROHS3 compliance and REACH unaffected status. Selection between these parts is based on inventory availability and post contact finish specifications. The SDL-113-T-12 does not specify post contact finish, while the SDL-113-G-12 specifies gold plating at 10.0µin (0.25µm) thickness on the post. Both connectors maintain identical mating contact specifications, mechanical dimensions, and operating temperature ranges. Current inventory shows 951 units of SDL-113-T-12 and 773 units of SDL-113-G-12 available.

Frequently Asked Questions (FAQ)

Q: What determines if SDL-113-G-12 can substitute for SDL-113-T-12?

A: Substitution is valid when connector type, contact type, position count, pitch spacing, mounting method, termination type, fastening mechanism, insulation material, contact material, and operating temperature range remain identical. Both parts meet these criteria.

Q: Are there differences in contact finish between these parts?

A: The SDL-113-T-12 does not specify post contact finish, while the SDL-113-G-12 specifies gold plating at 10.0µin (0.25µm) on the post. Both maintain identical 30.0µin (0.76µm) gold plating on mating contacts.

Q: Do both parts have the same mechanical dimensions?

A: Yes. Both connectors share identical insulation height (0.095"), contact length (0.095"), pitch spacing (0.100"), and row spacing (0.100").

Q: Are compliance certifications identical?

A: Both parts are ROHS3 compliant, REACH unaffected, and carry MSL rating of 1 (Unlimited). Both maintain active product status.

Q: What is the packaging format for these connectors?

A: Both SDL-113-T-12 and SDL-113-G-12 are supplied in tube packaging.