SD12.TCT Transient Voltage Suppressor - Equivalent & Substitute Parts

Part Overview

The SD12.TCT is a unidirectional Zener-type transient voltage suppressor (TVS) diode manufactured by Semtech Corporation in SOD-323 surface mount packaging. This component provides transient overvoltage protection for general-purpose applications with a 12V reverse standoff voltage and 25V maximum clamping voltage. The part is active in production status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when design requirements necessitate alternative sourcing due to inventory constraints, supply chain considerations, or when specific performance characteristics better match application requirements while maintaining electrical compatibility within the defined parameter ranges.

Key Parameters

Parameter	Value	Unit
Voltage - Reverse Standoff (Typ)	12V (Max)	V
Voltage - Breakdown (Min)	13.3V	V
Voltage - Clamping (Max) @ Ipp	25V	V
Current - Peak Pulse (10/1000µs)	15A (8/20µs)	A
Power - Peak Pulse	350W	W
Capacitance @ 1MHz	150pF	pF
Operating Temperature Range	-55°C ~ 125°C	°C
Package / Case	SOD-323	-
Mounting Type	Surface Mount	-
RoHS Status	ROHS3 Compliant	-

Substitute Part Grouping Explanation

Substitution eligibility for the SD12.TCT is determined by the following critical parameters:

Voltage - Reverse Standoff: 12V (Max)
Voltage - Breakdown (Min): 13.3V
Unidirectional channel configuration (1 channel)
Type: Zener
RoHS3 compliance
Surface mount technology

Substitute parts are grouped into two categories based on package compatibility and performance characteristics:

Category A - Direct Package Compatibility (SOD-323): Parts maintaining identical SOD-323 packaging with equivalent electrical specifications. These substitutes support direct board-level replacement without layout modifications.

Category B - Alternative Package (SOT-23-3): Parts with different package geometry requiring PCB layout adjustment but offering enhanced current handling or extended temperature range capabilities.

Parameter Comparison

Parameter	SD12.TCT (Semtech)	SD12-7 (Diodes Inc.)	PESD12VS1UJ,115 (Nexperia)	SD12T1G (onsemi)	SM12T1G (onsemi)
Manufacturer	Semtech Corporation	Diodes Incorporated	Nexperia USA Inc.	onsemi	onsemi
Voltage - Reverse Standoff (Typ)	12V (Max)	12V (Max)	12V (Max)	12V	12V
Voltage - Breakdown (Min)	13.3V	13.3V	13.3V	13.3V	13.3V
Voltage - Clamping (Max) @ Ipp	25V	25V	27V	19V	19V
Current - Peak Pulse (8/20µs)	15A	15A	22.5A	15A	12A
Power - Peak Pulse	350W	350W	600W	350W	300W
Capacitance @ 1MHz	150pF	150pF	160pF	150pF	-
Operating Temperature Range	-55°C ~ 125°C	-55°C ~ 150°C	-55°C ~ 150°C	-55°C ~ 150°C	-55°C ~ 150°C
Package / Case	SOD-323	SOD-323	SOD-323F	SOD-323	SOT-23-3
Unidirectional Channels	1	1	1	1	2
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Active	Active	Active	Active	Active

Engineering Selection Recommendations

SD12-7 (Diodes Incorporated): Direct electrical and package equivalent with identical SOD-323 form factor. Extended operating temperature range to 150°C provides enhanced thermal margin. Suitable for applications requiring extended temperature performance without layout modification.

PESD12VS1UJ,115 (Nexperia USA Inc.): Automotive-grade component with AEC-Q101 qualification. Higher peak pulse current (22.5A) and power dissipation (600W) accommodate more severe transient events. SOD-323F package variant requires verification of PCB footprint compatibility. Recommended for automotive and industrial applications requiring enhanced surge protection capability.

SD12T1G (onsemi): Automotive-grade alternative with lower clamping voltage (19V) and extended temperature range to 150°C. Maintains 15A peak pulse current and SOD-323 package compatibility. Suitable for applications where lower clamping voltage is acceptable and automotive qualification is required.

SM12T1G (onsemi): Dual-channel configuration in SOT-23-3 package with extended temperature range to 150°C. Lower peak pulse current (12A) and power dissipation (300W) reflect reduced surge handling capability. Requires PCB layout modification due to different package geometry. Applicable to space-constrained designs where dual-channel protection is beneficial.

Frequently Asked Questions (FAQ)

Q: Can SD12-7 replace SD12.TCT in existing designs without modification?

A: Yes. SD12-7 maintains identical electrical specifications and SOD-323 packaging. Direct board-level substitution is supported without layout changes.

Q: What is the primary difference between PESD12VS1UJ,115 and the original SD12.TCT?

A: PESD12VS1UJ,115 features higher peak pulse current (22.5A vs 15A) and power dissipation (600W vs 350W), with automotive-grade qualification. The SOD-323F package variant requires footprint verification. Clamping voltage is 27V versus 25V.

Q: Is SM12T1G suitable as a direct replacement?

A: SM12T1G is not a direct replacement due to SOT-23-3 package geometry differing from SOD-323. Additionally, the dual-channel configuration and reduced peak pulse current (12A vs 15A) require application-level evaluation. PCB layout modification is necessary.

Q: What are the temperature operating range differences among substitutes?

A: SD12.TCT operates -55°C to 125°C. All substitute parts extend the upper limit to 150°C, providing 25°C additional thermal margin. This is relevant for applications in elevated ambient or high-power environments.

Q: Which substitute offers the highest transient protection capability?

A: PESD12VS1UJ,115 provides the highest peak pulse current (22.5A) and power dissipation (600W). This part is recommended for applications experiencing severe transient events or requiring automotive-grade reliability.

Q: Are all substitutes RoHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1), matching the original SD12.TCT specifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message