SA5532AD Equivalent & Substitute Parts

Part Overview

The SA5532AD is a general-purpose operational amplifier manufactured by Texas Instruments, configured as a dual-channel (2 circuit) device in an 8-SOIC surface mount package. This device is classified as Last Time Buy, indicating discontinued production status. The SA5532AD is designed for general-purpose amplification applications requiring moderate bandwidth and low input offset voltage characteristics.

Due to Last Time Buy status, equivalent and substitute parts are necessary for ongoing design support, production continuity, and long-term component availability. Substitute parts listed below maintain functional compatibility through matching electrical specifications and identical package geometry.

Key Parameters

Parameter	Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	2	—
Slew Rate	9	V/µs
Gain Bandwidth Product	10	MHz
Current - Input Bias	200	nA
Voltage - Input Offset	500	µV
Current - Supply (per Channel)	8	mA
Current - Output / Channel	38	mA
Voltage - Supply Span (Min)	10	V
Voltage - Supply Span (Max)	30	V
Operating Temperature Range	-40 to 85	°C
Package / Case	8-SOIC (0.154", 3.90mm Width)	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitute parts for the SA5532AD are grouped based on strict electrical and mechanical compatibility criteria. The primary substitution parameters are:

Critical Matching Parameters:

Package type: 8-SOIC surface mount (0.154", 3.90mm width)
Number of circuits: 2 channels
Amplifier classification: General Purpose
Supply voltage range: Minimum 10V to Maximum 30V
Operating temperature: -40°C to 85°C or extended range
RoHS3 compliance and MSL rating

Functional Compatibility Parameters:

Slew rate: 9V/µs or greater
Gain bandwidth product: 10 MHz or greater
Input bias current: 200 nA or lower
Input offset voltage: 500 µV or lower
Output current per channel: 38 mA or greater

Substitutes are divided into two categories:

Category 1: Direct Manufacturer Equivalents (Texas Instruments SA5532 Series) Parts maintaining identical electrical specifications with alternative packaging formats (tube, cut tape, tape & reel).

Category 2: Cross-Manufacturer Alternatives Parts from Analog Devices, Diodes Incorporated, STMicroelectronics, and onsemi that meet or exceed the electrical and mechanical requirements of the SA5532AD while maintaining 8-SOIC package compatibility.

Parameter Comparison

Part Number	Manufacturer	Amplifier Type	Slew Rate (V/µs)	GBW (MHz)	Input Bias (nA)	Input Offset (µV)	Supply Min (V)	Supply Max (V)	Temp Range (°C)	Product Status
SA5532AD	Texas Instruments	General Purpose	9	10	200	500	10	30	-40 to 85	Last Time Buy
SA5532ADR	Texas Instruments	General Purpose	9	10	200	500	10	30	-40 to 85	Active
ADA4004-2ARZ	Analog Devices Inc.	General Purpose	2.7	12	40	40	10	30	-40 to 125	Active
ADA4004-2ARZ-R7	Analog Devices Inc.	General Purpose	2.7	12	40	40	10	30	-40 to 125	Active
ADA4004-2ARZ-RL	Analog Devices Inc.	General Purpose	2.7	12	40	40	10	30	-40 to 125	Active
AS358MTR-E1	Diodes Incorporated	General Purpose	—	—	20	2000	3	36	-40 to 85	Active
LF253DT	STMicroelectronics	J-FET	16	4	0.02	3000	6	36	-40 to 105	Active
LF353DT	STMicroelectronics	J-FET	16	4	0.02	3000	6	36	0 to 70	Active
LM358ADR2G	onsemi	General Purpose	—	1	45	2000	3	32	0 to 70	Active
LM833DR2G	onsemi	Audio	7	15	300	300	10	36	-40 to 85	Active
LM833DT	STMicroelectronics	Audio	7	15	300	300	5	30	-40 to 105	Active

Engineering Selection Recommendations

Tier 1: Direct Equivalent (Recommended Primary Substitute)

SA5532ADR (Texas Instruments) is the direct equivalent to SA5532AD, maintaining identical electrical specifications and supply voltage range. This part is in Active product status with significantly higher inventory availability (32,800 units). The only difference is packaging format (Cut Tape & Digi-Reel versus Tube). This substitution requires no circuit redesign and is fully compatible with existing PCB layouts.

Tier 2: Enhanced Performance Alternatives (Active Status)

ADA4004-2ARZ, ADA4004-2ARZ-R7, and ADA4004-2ARZ-RL (Analog Devices Inc., iPolar series) provide superior electrical characteristics including lower input bias current (40 nA versus 200 nA), lower input offset voltage (40 µV versus 500 µV), and extended operating temperature range (-40°C to 125°C). These parts are in Active product status with strong inventory levels. The trade-off is lower slew rate (2.7V/µs versus 9V/µs), which is acceptable for general-purpose applications not requiring high-speed transient response.

Tier 3: Functional Alternatives (Active Status, Design Considerations Required)

LM833DR2G and LM833DT (Audio amplifiers) are classified as Audio type rather than General Purpose, but maintain compatible 8-SOIC packaging and supply voltage ranges. These parts offer higher gain bandwidth product (15 MHz) and are in Active status. Application suitability depends on specific circuit requirements.

LF253DT and LF353DT (STMicroelectronics, J-FET type) feature extremely low input bias current (20 pA) and higher slew rate (16V/µs), but lower gain bandwidth product (4 MHz). These are suitable for applications requiring minimal input current draw. LF353DT has restricted operating temperature range (0°C to 70°C).

AS358MTR-E1 (Diodes Incorporated) offers wide supply voltage range (3V to 36V) and is in Active status with highest inventory availability (264,200 units). However, input offset voltage (2 mV) and supply current specifications differ significantly from SA5532AD.

LM358ADR2G (onsemi) provides lowest cost alternative with wide supply range (3V to 32V) and Active status, but operates at restricted temperature range (0°C to 70°C) and has significantly lower gain bandwidth product (1 MHz).

Compliance and Certification:

All substitute parts listed are ROHS3 compliant and REACH unaffected. Moisture sensitivity levels are MSL 1 (unlimited) for most alternatives, with AS358MTR-E1 rated MSL 3 (168 hours). All parts carry EAR99 ECCN classification and HTSUS code 8542.33.0001.

Frequently Asked Questions (FAQ)

Q: Can SA5532ADR be used as a direct replacement for SA5532AD?

A: Yes. SA5532ADR is the direct manufacturer equivalent with identical electrical specifications, supply voltage range, and operating temperature. The only difference is packaging format (Cut Tape & Digi-Reel versus Tube). No circuit modifications are required. Existing PCB layouts and designs are fully compatible.

Q: What is the primary reason for substituting SA5532AD?

A: SA5532AD is classified as Last Time Buy, indicating discontinued production. Substitution is necessary for design continuity and long-term component availability. SA5532ADR provides the same functionality in Active product status.

Q: Are the ADA4004-2ARZ variants suitable replacements?

A: ADA4004-2ARZ, ADA4004-2ARZ-R7, and ADA4004-2ARZ-RL are functionally compatible with identical 8-SOIC packaging and supply voltage range. These parts offer improved electrical performance (lower input bias current and offset voltage) and extended temperature range (-40°C to 125°C). However, slew rate is lower (2.7V/µs versus 9V/µs). Suitability depends on application-specific requirements for transient response speed.

Q: What is the difference between the three ADA4004-2ARZ variants?

A: All three variants (ADA4004-2ARZ, ADA4004-2ARZ-R7, ADA4004-2ARZ-RL) have identical electrical specifications. The differences are packaging formats: standard Tube, Cut Tape & Digi-Reel (R7 suffix), and Tape & Reel (RL suffix). Selection depends on procurement and assembly requirements.

Q: Can J-FET amplifiers (LF253DT, LF353DT) replace SA5532AD?

A: LF253DT and LF353DT are J-FET type amplifiers with different electrical characteristics. They feature extremely low input bias current (20 pA) and higher slew rate (16V/µs), but lower gain bandwidth product (4 MHz). These are suitable only for applications where minimal input current draw is critical. LF353DT has restricted operating temperature (0°C to 70°C), limiting its use in extended temperature applications.

Q: What are the key differences between General Purpose and Audio amplifier types?

A: LM833DR2G and LM833DT are classified as Audio amplifiers rather than General Purpose. While they maintain compatible 8-SOIC packaging and similar supply voltage ranges, they are optimized for audio frequency applications with higher gain bandwidth product (15 MHz). Substitution is application-dependent and requires verification that audio-specific design characteristics are acceptable for the target circuit.

Q: Which substitute offers the widest supply voltage range?

A: AS358MTR-E1 (Diodes Incorporated) offers the widest supply voltage range of 3V to 36V, compared to SA5532AD's 10V to 30V range. However, this part has significantly different electrical characteristics including higher input offset voltage (2 mV versus 500 µV) and lower supply current specifications. Substitution requires circuit analysis to confirm compatibility.

Q: What is the difference between 8-SOIC and 8-SO package designations?

A: 8-SOIC and 8-SO are functionally equivalent surface mount packages with identical 0.154" (3.90mm) width and pin configuration. The designations reflect different manufacturer naming conventions. Both are compatible with standard PCB layouts designed for 8-pin SOIC packages.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed are ROHS3 compliant. Moisture sensitivity levels are MSL 1 (unlimited) for most parts, with AS358MTR-E1 rated MSL 3 (168 hours). All parts are REACH unaffected and carry EAR99 ECCN classification.

Q: Which substitute has the highest inventory availability?

A: AS358MTR-E1 (Diodes Incorporated) has the highest inventory availability at 264,200 units. SA5532ADR (Texas Instruments) has 32,800 units. However, inventory levels are subject to change and should be verified with current supplier data.

Q: Can LM358ADR2G be used in applications requiring -40°C to 85°C operation?

A: No. LM358ADR2G is rated for 0°C to 70°C operating temperature, which does not meet the SA5532AD specification of -40°C to 85°C. This part is unsuitable for extended low-temperature or high-temperature applications. Alternative parts with matching temperature range include SA5532ADR, ADA4004 variants, LF253DT, and LM833 variants.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message