RT1206FRE07634RL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07634RL is a 634 Ohms ±1% 0.25W thin film chip resistor in 1206 (3216 Metric) surface mount package manufactured by YAGEO. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Equivalent and substitute parts are identified when they maintain identical electrical specifications (resistance value and power rating) while meeting the same mechanical packaging requirements and environmental operating conditions.

Substiute Parts

RT1206FRE07634RL

YAGEOIn Stock: 841RT1206FRE07634RL Datasheet

Current PartRFQ

ERA-8AEB6340V

Panasonic Electronic ComponentsIn Stock: 5518ERA-8AEB6340V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206FRE07634RL is determined by the following critical parameters:

• Resistance value must be 634 Ohms
• Power rating must be 0.25W (1/4W) minimum
• Package must be 1206 (3216 Metric) surface mount
• Operating temperature range must encompass -55°C ~ 155°C
• Composition must be thin film
• RoHS3 compliance required
• Moisture sensitivity level must be 1 (Unlimited)

The ERA-8AEB6340V qualifies as a substitute part because it maintains all critical electrical and mechanical parameters while offering enhanced tolerance specification (±0.1% versus ±1%) and automotive-grade qualification (AEC-Q200).

Parameter Comparison

Engineering Selection Recommendations

Both the RT1206FRE07634RL and ERA-8AEB6340V are Active status components with full RoHS3 compliance and unlimited moisture sensitivity ratings. The ERA-8AEB6340V provides enhanced tolerance specification (±0.1% versus ±1%) and automotive-grade AEC-Q200 qualification, making it suitable for applications requiring tighter resistance tolerances or automotive environmental conditions. Selection between these parts should be based on application-specific tolerance requirements and environmental operating conditions rather than functional equivalence, as both meet the baseline electrical and mechanical specifications for 634 Ohms 0.25W 1206 thin film resistor applications.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB6340V be used as a direct replacement for RT1206FRE07634RL?

A: Yes. Both parts maintain identical resistance value (634 Ohms), power rating (0.25W), package format (1206), composition (thin film), and operating temperature range (-55°C ~ 155°C). The ERA-8AEB6340V offers tighter tolerance (±0.1% versus ±1%) and automotive qualification, making it functionally compatible for direct substitution.

Q: What are the key differences between these parts?

A: The primary differences are tolerance specification (±0.1% for ERA-8AEB6340V versus ±1% for RT1206FRE07634RL), temperature coefficient (±25ppm/°C versus ±50ppm/°C), and automotive qualification (AEC-Q200 for ERA-8AEB6340V). Electrical and mechanical parameters remain identical.

Q: Are there package dimension differences?

A: Both parts use 1206 (3216 Metric) package. Dimensional variations are minimal: RT1206FRE07634RL measures 0.122" L x 0.063" W (3.10mm x 1.60mm) with 0.026" maximum seated height; ERA-8AEB6340V measures 0.126" L x 0.063" W (3.20mm x 1.60mm) with 0.028" maximum seated height. These differences are within standard PCB layout tolerances for 1206 footprints.

Q: Do both parts meet RoHS requirements?

A: Yes. Both RT1206FRE07634RL and ERA-8AEB6340V are ROHS3 compliant with REACH Unaffected status.