RT0805FRE07732RL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07732RL is a 732 Ohms ±1% thin film chip resistor in 0805 (2012 Metric) package format, rated at 0.125W (1/8W) power dissipation. Manufactured by YAGEO and currently in active production status, this component is widely used in precision analog circuits and signal conditioning applications. Substitute parts are identified to provide design flexibility for procurement, inventory management, or performance optimization while maintaining electrical and mechanical compatibility within the 0805 package class.

Substiute Parts

RT0805FRE07732RL

YAGEOIn Stock: 1024RT0805FRE07732RL Datasheet

Current PartRFQ

RT0805BRD07732RL

YAGEOIn Stock: 2743RT0805BRD07732RL Datasheet

UpgradeRFQ

2176092-6

TE Connectivity Passive ProductIn Stock: 13312176092-6 Datasheet

DirectRFQ

ERA-6AEB7320V

Panasonic Electronic ComponentsIn Stock: 10651ERA-6AEB7320V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE07732RL is determined by the following criteria:

Primary Compatibility Requirements:

• Resistance value: 732 Ohms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (minimum requirement)
• RoHS Status: ROHS3 Compliant (minimum requirement)

Allowable Parameter Variations:

• Tolerance: May be equal to or tighter (lower) than ±1%
• Power Rating: May be equal to or higher than 0.125W
• Temperature Coefficient: May be equal to or lower (better stability)

Three substitute parts meet these criteria and are grouped as follows:

Upgrade Category (Improved Tolerance): RT0805BRD07732RL and ERA-6AEB7320V both offer ±0.1% tolerance with improved temperature coefficient (±25ppm/°C) compared to the original ±1% / ±50ppm/°C specification.

Higher Power Rating Category: 2176092-6 provides 0.25W (1/4W) power rating with ±0.1% tolerance, suitable for applications requiring increased thermal headroom.

Parameter Comparison

Engineering Selection Recommendations

All four parts maintain active production status and ROHS3 compliance, ensuring long-term availability and regulatory conformance.

RT0805BRD07732RL is the direct upgrade from the same manufacturer (YAGEO), offering tighter tolerance (±0.1% vs ±1%) and improved temperature coefficient (±25ppm/°C vs ±50ppm/°C) while maintaining identical power rating and package specifications. This substitution is suitable for applications requiring enhanced precision without thermal or power constraints.

2176092-6 from TE Connectivity Passive Product provides the highest power rating (0.25W vs 0.125W) with ±0.1% tolerance and ±25ppm/°C temperature coefficient. This part is appropriate for circuits where increased power dissipation capability is required or where thermal margin is a design consideration.

ERA-6AEB7320V from Panasonic Electronic Components combines ±0.1% tolerance with AEC-Q200 automotive qualification. This part is specified for applications requiring automotive-grade reliability and environmental performance standards.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD07732RL be used as a direct replacement for RT0805FRE07732RL?

A: Yes. Both parts share identical resistance (732 Ohms), package (0805), power rating (0.125W), and operating temperature range (-55°C ~ 155°C). RT0805BRD07732RL offers improved tolerance (±0.1% vs ±1%) and temperature coefficient (±25ppm/°C vs ±50ppm/°C), making it a compatible upgrade with no circuit modifications required.

Q: What is the difference between the 0.125W and 0.25W power ratings?

A: Power rating indicates the maximum continuous power dissipation the resistor can handle without exceeding temperature limits. The 2176092-6 (0.25W) can dissipate twice the power of the original part (0.125W) before thermal failure. Selection depends on the actual power dissipation in the circuit application.

Q: Are all substitute parts in the same 0805 package?

A: Yes. All four parts use the 0805 (2012 Metric) package with identical footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm). They are mechanically interchangeable on PCB layouts designed for 0805 components.

Q: What does AEC-Q200 qualification mean for ERA-6AEB7320V?

A: AEC-Q200 is an automotive industry standard for passive component reliability. ERA-6AEB7320V meets this qualification, making it suitable for automotive and high-reliability applications where enhanced environmental stress screening and failure rate monitoring are required.

Q: Can I use 2176092-6 in a circuit designed for 0.125W power rating?

A: Yes. The 2176092-6 with 0.25W rating can be used in any circuit designed for 0.125W or lower power dissipation. The higher power rating provides additional thermal margin and does not affect electrical performance at lower power levels.

Q: Are all parts RoHS3 compliant?

A: Yes. All four parts (RT0805FRE07732RL, RT0805BRD07732RL, 2176092-6, and ERA-6AEB7320V) are ROHS3 compliant and suitable for applications with RoHS regulatory requirements.