RT0805FRE07715RL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07715RL is a 715 Ohms ±1% thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This surface mount device is rated for 0.125W (1/8W) power dissipation with a temperature coefficient of ±50ppm/°C and operates across -55°C to 155°C. The part maintains Active product status and is RoHS3 compliant with unlimited moisture sensitivity level (MSL 1).

Equivalent and substitute parts are identified when they maintain the same resistance value, package form factor, and operating temperature range while meeting or exceeding the original specifications for tolerance, power rating, and environmental compliance.

Substiute Parts

RT0805FRE07715RL

YAGEOIn Stock: 1037RT0805FRE07715RL Datasheet

Current PartRFQ

2176092-5

TE Connectivity Passive ProductIn Stock: 21812176092-5 Datasheet

DirectRFQ

ERA-6AEB7150V

Panasonic Electronic ComponentsIn Stock: 9974ERA-6AEB7150V Datasheet

UpgradeRFQ

ERJ-6ENF7150V

Panasonic Electronic ComponentsIn Stock: 74795ERJ-6ENF7150V Datasheet

MFR RecommendedRFQ

RG2012P-7151-B-T5

SusumuIn Stock: 24695RG2012P-7151-B-T5 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE07715RL is determined by the following criteria:

Primary Matching Criteria:

• Resistance value: 715 Ohms (exact match required)
• Package form factor: 0805 (2012 Metric)
• Operating temperature range: -55°C ~ 155°C (minimum)
• RoHS3 compliance status

Acceptable Variation Parameters:

• Tolerance: Equal to or tighter than ±1%
• Power rating: Equal to or greater than 0.125W
• Temperature coefficient: Equal to or lower absolute value
• Composition: Thin film preferred; thick film acceptable with equivalent performance

Non-Substitutable Parts: RG2012P-7151-B-T5 (Susumu) is listed in the original substitute field but specifies 7.15 kOhms resistance, which is a 10x multiplier difference from the required 715 Ohms. This part does not meet the primary matching criterion and is not a valid substitute.

Parameter Comparison

Engineering Selection Recommendations

2176092-5 (TE Connectivity RP73P Series)

This part provides improved tolerance (±0.1% vs ±1%) and increased power rating (0.25W vs 0.125W) while maintaining thin film composition and identical operating temperature range. The 0.026" maximum seated height is 0.002" taller than the original, which may require PCB layout verification in space-constrained applications. RoHS3 compliance is confirmed; REACH status is vendor undefined.

ERA-6AEB7150V (Panasonic ERA-6A Series)

This part matches the original specifications exactly in resistance, power rating, and physical dimensions while providing superior tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C). AEC-Q200 automotive qualification is included. Thin film composition and RoHS3 compliance are maintained. REACH status is unaffected.

ERJ-6ENF7150V (Panasonic ERJ-6EN Series)

This part maintains the original tolerance (±1%) and power rating (0.125W) with identical operating temperature range and RoHS3 compliance. Composition differs to thick film, and temperature coefficient is higher (±100ppm/°C vs ±50ppm/°C). Maximum seated height is 0.028", which is 0.004" taller than the original. AEC-Q200 automotive qualification is included. This part is suitable for applications where automotive-grade reliability is required and the higher temperature coefficient is acceptable.

Frequently Asked Questions (FAQ)

Q: Can 2176092-5 be used as a direct replacement?

A: Yes. The 2176092-5 maintains the same 715 Ohms resistance, 0805 package, and operating temperature range. The 0.25W power rating exceeds the original 0.125W requirement. The maximum seated height of 0.026" is 0.002" taller; verify clearance in your PCB layout.

Q: What is the difference between thin film and thick film composition?

A: Thin film resistors (RT0805FRE07715RL, 2176092-5, ERA-6AEB7150V) typically offer tighter tolerance and lower temperature coefficient. Thick film resistors (ERJ-6ENF7150V) provide cost efficiency and are suitable for general-purpose applications. The ERJ-6ENF7150V has a higher temperature coefficient (±100ppm/°C) compared to the original (±50ppm/°C).

Q: Are the Panasonic parts automotive-qualified?

A: Yes. Both ERA-6AEB7150V and ERJ-6ENF7150V carry AEC-Q200 automotive qualification. The original RT0805FRE07715RL does not have automotive rating.

Q: What does RoHS3 compliance mean?

A: RoHS3 compliance indicates the part meets Restriction of Hazardous Substances Directive requirements, restricting lead, cadmium, mercury, and other hazardous materials. All listed substitute parts are RoHS3 compliant.

Q: Can I use RG2012P-7151-B-T5 as a substitute?

A: No. RG2012P-7151-B-T5 specifies 7.15 kOhms resistance, which is 10 times the required 715 Ohms value. This part is not electrically compatible.

Q: Which substitute offers the best tolerance?

A: Both 2176092-5 and ERA-6AEB7150V offer ±0.1% tolerance, compared to the original ±1%. ERA-6AEB7150V additionally provides the lowest temperature coefficient (±25ppm/°C) and matches the original physical dimensions exactly.