RT0805FRE0761R9L Equivalent & Substitute Parts

Part Overview

The RT0805FRE0761R9L is a 61.9 Ohm ±1% thin film chip resistor manufactured by YAGEO in 0805 (2012 Metric) package format. This surface mount device is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The component is ROHS3 compliant and carries MSL Level 1 (Unlimited) moisture sensitivity rating. Equivalent and substitute parts are identified for applications requiring alternative sourcing, improved tolerance specifications, or enhanced reliability certifications.

Substiute Parts

RT0805FRE0761R9L

YAGEOIn Stock: 1099RT0805FRE0761R9L Datasheet

Current PartRFQ

2176091-4

TE Connectivity Passive ProductIn Stock: 57152176091-4 Datasheet

DirectRFQ

ERA-6AEB61R9V

Panasonic Electronic ComponentsIn Stock: 12151ERA-6AEB61R9V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT0805FRE0761R9L are qualified based on the following critical parameters:

• Identical resistance value: 61.9 Ohms
• Compatible package format: 0805 (2012 Metric)
• Matching composition: Thin Film
• Equivalent or superior tolerance: ±1% or better
• Equal or greater power rating: 0.125W minimum
• Operating temperature range: -55°C to 155°C minimum
• RoHS3 compliance maintained
• MSL Level 1 rating

Two substitute parts meet these criteria with variations in tolerance, power rating, and certifications.

Parameter Comparison

Engineering Selection Recommendations

2176091-4 (TE Connectivity): This direct substitute offers improved tolerance specification (±0.1% versus ±1%) and increased power rating (0.25W versus 0.125W) within the same 0805 package footprint. Temperature coefficient is reduced to ±25ppm/°C. ROHS3 compliance is maintained. Selection is appropriate for applications requiring tighter tolerance control or higher thermal dissipation capacity while maintaining standard industrial reliability.

ERA-6AEB61R9V (Panasonic): This upgrade substitute provides ±0.1% tolerance and AEC-Q200 automotive qualification. Power rating remains at 0.125W (1/8W), matching the original specification. Temperature coefficient is ±25ppm/°C. ROHS3 and REACH compliance are confirmed. Selection is appropriate for automotive applications, mission-critical systems, or designs requiring enhanced reliability certifications.

Frequently Asked Questions (FAQ)

Q: Can 2176091-4 be used as a direct replacement for RT0805FRE0761R9L?

A: Yes. Both components share identical resistance value (61.9 Ohms), package format (0805), composition (thin film), and operating temperature range (-55°C to 155°C). The substitute offers superior tolerance (±0.1%) and higher power rating (0.25W). Physical dimensions and termination count are equivalent.

Q: What is the primary advantage of ERA-6AEB61R9V?

A: ERA-6AEB61R9V carries AEC-Q200 automotive qualification, indicating compliance with automotive reliability and quality standards. Tolerance is improved to ±0.1%, and temperature coefficient is reduced to ±25ppm/°C. Power rating and package format remain compatible with the original specification.

Q: Are all three parts pin-compatible?

A: Yes. All three components are 0805 (2012 Metric) thin film chip resistors with two terminations. Physical dimensions (0.079" L x 0.049" W) and footprint are identical, enabling direct PCB layout compatibility.

Q: Does tolerance improvement affect circuit performance?

A: Tolerance specification determines resistor value accuracy. The original RT0805FRE0761R9L maintains ±1% tolerance. Both substitutes offer ±0.1% tolerance, providing tighter value control. Circuit impact depends on application sensitivity to resistance variation.

Q: Which substitute is recommended for cost optimization?

A: Selection between substitutes depends on application requirements. 2176091-4 offers higher power rating at potentially lower cost. ERA-6AEB61R9V includes automotive certification at a potential cost premium. Both maintain ROHS3 compliance and MSL Level 1 rating.

Q: Are moisture sensitivity levels equivalent across all three parts?

A: Yes. All three components carry MSL Level 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage or handling.