RT0805FRE07365RL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07365RL is a 365 Ohm ±1% thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This surface mount device is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The part is ROHS3 compliant and carries MSL Level 1 (Unlimited) moisture sensitivity rating. As an active product with current inventory availability, equivalent and substitute parts may be required for design flexibility, supply chain optimization, or performance enhancement in specific applications.

Substiute Parts

RT0805FRE07365RL

YAGEOIn Stock: 787RT0805FRE07365RL Datasheet

Current PartRFQ

7-2176091-6

TE Connectivity Passive ProductIn Stock: 16937-2176091-6 Datasheet

DirectRFQ

ERA-6AEB3650V

Panasonic Electronic ComponentsIn Stock: 8089ERA-6AEB3650V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE07365RL is determined by the following critical parameters:

• Resistance Value: Must be 365 Ohms
• Package Type: Must be 0805 (2012 Metric) for mechanical and electrical compatibility
• Composition: Thin film construction maintains performance characteristics
• Operating Temperature Range: Must support -55°C to 155°C minimum
• Termination Count: Must have 2 terminations for PCB footprint compatibility
• Regulatory Compliance: ROHS3 compliance required

The identified substitute parts meet these core requirements while offering variations in tolerance, power rating, and temperature coefficient that may provide advantages in specific circuit applications.

Parameter Comparison

Engineering Selection Recommendations

7-2176091-6 (TE Connectivity Passive Product)

This substitute offers improved tolerance (±0.1% vs ±1%) and higher power rating (0.25W vs 0.125W) within the same 0805 package footprint. The temperature coefficient is reduced to ±25ppm/°C, providing better stability across the operating temperature range. Height variation (0.026" vs 0.024") remains within typical PCB assembly tolerances. ROHS3 compliance and MSL Level 1 rating maintain regulatory and environmental requirements.

ERA-6AEB3650V (Panasonic Electronic Components)

This substitute provides the tightest tolerance specification (±0.1%) with automotive-grade AEC-Q200 qualification. Power rating matches the original specification at 0.125W (1/8W). Temperature coefficient of ±25ppm/°C offers superior frequency stability. Physical dimensions and height are identical to the original part. ROHS3 compliance and REACH Unaffected status confirm full regulatory alignment. The AEC-Q200 rating indicates suitability for automotive and high-reliability applications.

Frequently Asked Questions (FAQ)

Q: Can 7-2176091-6 be used as a direct replacement for RT0805FRE07365RL?

A: Yes. Both parts share identical resistance value (365 Ohms), package type (0805), composition (thin film), and operating temperature range (-55°C to 155°C). The higher power rating (0.25W vs 0.125W) and improved tolerance (±0.1% vs ±1%) are compatible with circuits designed for the original part. Height difference of 0.002" (0.05mm) is within standard PCB assembly clearance specifications.

Q: What is the advantage of ERA-6AEB3650V over the original RT0805FRE07365RL?

A: ERA-6AEB3650V offers three key advantages: tighter tolerance (±0.1% vs ±1%), lower temperature coefficient (±25ppm/°C vs ±50ppm/°C), and AEC-Q200 automotive qualification. These characteristics make it suitable for precision analog circuits and automotive applications requiring enhanced stability and reliability.

Q: Are all three parts mechanically compatible with the same PCB footprint?

A: Yes. All three parts use the 0805 (2012 Metric) package with identical length (0.079") and width (0.049"). Height variations (0.024" to 0.026") are negligible for standard PCB assembly and do not affect footprint compatibility.

Q: Do the substitute parts maintain the same regulatory compliance?

A: Yes. All three parts are ROHS3 compliant and carry MSL Level 1 (Unlimited) moisture sensitivity rating. ERA-6AEB3650V additionally holds REACH Unaffected status, confirming full environmental and regulatory alignment.

Q: Which substitute should be selected for high-precision applications?

A: ERA-6AEB3650V is recommended for high-precision applications due to its ±0.1% tolerance and ±25ppm/°C temperature coefficient. These specifications provide superior accuracy and stability compared to the original RT0805FRE07365RL (±1% tolerance, ±50ppm/°C).